As far as I know is the capacitor voltage of the WS90 not communicated
via the local API (Ecowitt Gateway API), only the battery voltage.
The capacitor voltage you can see in the Ecowitt cloud dashboard of your
station/console - that's a different communication protocol between your
console and the Ecowitt cloud.
have a look at Ecowitt Gateway driver WiKi aka GW1000 API driver:
https://github.com/gjr80/weewx-gw1000/wiki/Sensor-battery-states
And, just for clarity, the Ecowitt app doesn't log anything. It reads
the data from the Ecowitt cloud where console has posted them. 😉
On 22.05.2023 10:59, [email protected] wrote:
Going to make the big jump form a series 3 weewx to the latest version
are there any pitfalls I should be aware of .
been running the GW1000 driver a couple of weeks works without issues
so far
The WS90 has and onboard capacitor and its logged on the Ecowitt app
 does the GW1000 driver log this voltage? or is it just the battery
voltage
Thanks for any advice
--
You received this message because you are subscribed to the Google
Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/0ea4581d-20fd-4300-8e9b-92445a2f3a9dn%40googlegroups.com
<https://groups.google.com/d/msgid/weewx-user/0ea4581d-20fd-4300-8e9b-92445a2f3a9dn%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/b0a6de0f-5d73-5a88-392e-c988a2d3227b%40gmail.com.
