Sorry, but I don't know anything about the WF UDP driver. You'll have to ask the author.
On Thu, May 25, 2023 at 5:12 AM [email protected] <[email protected]> wrote: > Thank you. It is posting to windguru now, but it seems the posts are > empty. Windguru has a time stamp that is current, but there is no wind > data. Upon a closer look I noticed that there is no WeatherFlowUDP > [[sensor_map]] being loaded when weewx starts! I can't seem to figure out > why though, the weewx.conf has the [[sensor_map]] and I don't notice any > code issues. (I placed a copy below). I tried to use the other two > udp_address options but they give errors. > > As a final comment, I switched to 'Simulator' and it is posting to > windguru correctly. This tells me that there is a problem with the > 'WeatherFlowUDP' driver which appears to load correctly but according to > the log, does not load the [[sensor_map]] when weewx starts. Any thoughts? > > [WeatherFlowUDP] > driver = user.weatherflowudp > log_raw_packets = False > udp_address = 0.0.0.0 > # udp_address = <broadcast> > # udp_address = 255.255.255.255 > udp_port = 50222 > udp_timeout = 90 > share_socket = False > > [[sensor_map]] > outTemp = air_temperature.ST-00055111.obs_st > outHumidity = relative_humidity.ST-00055111.obs_st > pressure = station_pressure.ST-00055111.obs_st > #lightning_strikes = lightning_strike_count.ST-00055111.obs_st > #avg_distance = lightning_strike_avg_distance.ST-00055111.obs_st > outTempBatteryStatus = battery.ST-00055111.obs_st > windSpeed = wind_speed.ST-00055111.obs_st > windDir = wind_direction.ST-00055111.obs_st > #luxXXX = illuminance.ST-00055111.obs_st > UV = uv.ST-00055111.obs_st > rain = rain_accumulated.ST-00055111.obs_st > windBatteryStatus = battery.ST-00055111.obs_st > radiation = solar_radiation.ST-00055111.obs_st > #lightningXXX = distance.ST-00055111.obs_st > #lightningYYY = energy.ST-00055111.obs_st > > On Thursday, May 25, 2023 at 3:24:33 PM UTC+4 Tom Keffer wrote: > >> The station_url is invalid. You're using "www.kitebeachcenter.ae". It >> needs an "https://"; in front, so it becomes >> >> station_url = https://www.kitebeachcenter.ae >> >> Meanwhile, whatever problem windguru had now seems to have gone away. >> >> >> On Thu, May 25, 2023 at 2:52 AM Sean Jahnig <[email protected]> wrote: >> >>> Hi Tom, >>> >>> Sorry that it took time to update on this, the remote location had a >>> problem with their internet for a few days so i was not able to access it >>> remotely until now. >>> >>> I set debug=2 in weewx.conf and below is the output. Can you make any >>> sense of it? >>> >>> 2023-05-25 13:33:23 weewx[989] DEBUG weewx.engine: Loading service >>> weewx.engine.StdReport >>> >>> 2023-05-25 13:33:23 weewx[989] INFO weewx.engine: 'pyephem' not >>> detected, extended almanac data is not available >>> >>> 2023-05-25 13:33:23 weewx[989] DEBUG weewx.engine: Finished loading >>> service weewx.engine.StdReport >>> >>> 2023-05-25 13:33:23 weewx[989] INFO __main__: Starting up weewx >>> version 4.10.2 >>> >>> 2023-05-25 13:33:23 weewx[989] DEBUG weewx.engine: Station does not >>> support reading the time >>> >>> 2023-05-25 13:33:23 weewx[989] INFO weewx.engine: Using binding >>> 'wx_binding' to database 'weewx.sdb' >>> >>> 2023-05-25 13:33:23 weewx[989] INFO weewx.manager: Starting backfill >>> of daily summaries >>> >>> 2023-05-25 13:33:23 weewx[989] INFO weewx.manager: Daily summaries up >>> to date >>> >>> 2023-05-25 13:33:23 weewx[989] INFO weewx.engine: Starting main packet >>> loop. >>> >>> 2023-05-25 13:33:23 weewx[989] DEBUG weewx.manager: Daily summary >>> version is 4.0 >>> >>> 2023-05-25 13:36:03 weewx[989] INFO weewx.manager: Added record >>> 2023-05-25 13:35:00 +04 (1685007300) to database 'weewx.sdb' >>> >>> 2023-05-25 13:36:03 weewx[989] INFO weewx.manager: Added record >>> 2023-05-25 13:35:00 +04 (1685007300) to daily summary in 'weewx.sdb' >>> >>> 2023-05-25 13:36:03 weewx[989] DEBUG user.windguru: url: >>> http://www.windguru.cz/upload/api.php?stationtype=weewx&uid=10004&salt=1685007300~salted&hash=6bbd54aaf782a1a40662b4fcaaf75ee0&interval=60&percip_interval=3600&precip=0.00 >>> >>> 2023-05-25 13:36:03 weewx[989] DEBUG weewx.reportengine: Running >>> reports for latest time in the database. >>> >>> 2023-05-25 13:36:03 weewx[989] DEBUG weewx.reportengine: Running >>> report 'SeasonsReport' >>> >>> 2023-05-25 13:36:03 weewx[989] DEBUG weewx.restx: StationRegistry url: >>> ' >>> http://weewx.com/register/register.cgi?station_url=www.kitebeachcenter.ae&description=Mikoko%2C+UAQ&latitude=25.5388&longitude=55.6287&station_type=WeatherFlowUDP&station_model=%3Cbound+method+WeatherFlowUDPDriver.hardware_name+of+%3Cuser.weatherflowudp.WeatherFlowUDPDriver+object+at+0x1061ec940%3E%3E&python_info=3.10.8&platform_info=macOS-12.5-x86_64-i386-64bit&config_path=%2FUsers%2FShared%2Fweewx%2Fweewx.conf&entry_path=%2FUsers%2FShared%2Fweewx%2Fbin%2Fweewxd&weewx_info=4.10.2 >>> ' >>> >>> 2023-05-25 13:36:03 weewx[989] DEBUG weewx.restx: WindGuru url: ' >>> http://www.windguru.cz/upload/api.php?stationtype=weewx&uid=10004&salt=1685007300~salted&hash=6bbd54aaf782a1a40662b4fcaaf75ee0&interval=60&percip_interval=3600&precip=0.00 >>> ' >>> >>> 2023-05-25 13:36:03 weewx[989] DEBUG weewx.reportengine: Found >>> configuration file /Users/Shared/weewx/skins/Seasons/skin.conf for report >>> 'SeasonsReport' >>> >>> 2023-05-25 13:36:03 weewx[989] DEBUG weewx.cheetahgenerator: Using >>> search list ['weewx.cheetahgenerator.Almanac', >>> 'weewx.cheetahgenerator.Current', 'weewx.cheetahgenerator.DisplayOptions', >>> 'weewx.cheetahgenerator.Extras', 'weewx.cheetahgenerator.Gettext', >>> 'weewx.cheetahgenerator.JSONHelpers', 'weewx.cheetahgenerator.PlotInfo', >>> 'weewx.cheetahgenerator.SkinInfo', 'weewx.cheetahgenerator.Station', >>> 'weewx.cheetahgenerator.Stats', 'weewx.cheetahgenerator.UnitInfo'] >>> >>> 2023-05-25 13:36:03 weewx[989] DEBUG weewx.manager: Daily summary >>> version is 4.0 >>> >>> 2023-05-25 13:36:04 weewx[989] INFO weewx.cheetahgenerator: Generated >>> 8 files for report SeasonsReport in 0.88 seconds >>> >>> 2023-05-25 13:36:04 weewx[989] DEBUG weewx.manager: Daily summary >>> version is 4.0 >>> >>> 2023-05-25 13:36:04 weewx[989] INFO weewx.imagegenerator: Generated 15 >>> images for report SeasonsReport in 0.58 seconds >>> >>> 2023-05-25 13:36:04 weewx[989] INFO weewx.reportengine: Copied 5 files >>> to /Users/Shared/weewx/public_html >>> >>> 2023-05-25 13:36:04 weewx[989] DEBUG weewx.reportengine: Report >>> 'SmartphoneReport' not enabled. Skipping. >>> >>> 2023-05-25 13:36:04 weewx[989] DEBUG weewx.reportengine: Report >>> 'MobileReport' not enabled. Skipping. >>> >>> 2023-05-25 13:36:04 weewx[989] DEBUG weewx.reportengine: Report >>> 'StandardReport' not enabled. Skipping. >>> >>> 2023-05-25 13:36:04 weewx[989] DEBUG weewx.reportengine: Report 'FTP' >>> not enabled. Skipping. >>> >>> 2023-05-25 13:36:04 weewx[989] DEBUG weewx.reportengine: Report >>> 'RSYNC' not enabled. Skipping. >>> >>> 2023-05-25 13:36:33 weewx[989] DEBUG weewx.restx: StationRegistry: >>> Failed upload attempt 1: <urlopen error [Errno 8] nodename nor servname >>> provided, or not known> >>> >>> 2023-05-25 13:36:38 weewx[989] DEBUG weewx.restx: StationRegistry url: >>> ' >>> http://weewx.com/register/register.cgi?station_url=www.kitebeachcenter.ae&description=Mikoko%2C+UAQ&latitude=25.5388&longitude=55.6287&station_type=WeatherFlowUDP&station_model=%3Cbound+method+WeatherFlowUDPDriver.hardware_name+of+%3Cuser.weatherflowudp.WeatherFlowUDPDriver+object+at+0x1061ec940%3E%3E&python_info=3.10.8&platform_info=macOS-12.5-x86_64-i386-64bit&config_path=%2FUsers%2FShared%2Fweewx%2Fweewx.conf&entry_path=%2FUsers%2FShared%2Fweewx%2Fbin%2Fweewxd&weewx_info=4.10.2 >>> ' >>> >>> 2023-05-25 13:37:03 weewx[989] DEBUG weewx.restx: WindGuru: Failed >>> upload attempt 1: <urlopen error timed out> >>> >>> 2023-05-25 13:37:08 weewx[989] DEBUG weewx.restx: StationRegistry: >>> Failed upload attempt 2: HTTP Error 400: BAD REQUEST >>> >>> 2023-05-25 13:37:08 weewx[989] DEBUG weewx.restx: WindGuru url: ' >>> http://www.windguru.cz/upload/api.php?stationtype=weewx&uid=10004&salt=1685007300~salted&hash=6bbd54aaf782a1a40662b4fcaaf75ee0&interval=60&percip_interval=3600&precip=0.00 >>> ' >>> >>> 2023-05-25 13:37:08 weewx[989] INFO weewx.restx: WindGuru: Published >>> record 2023-05-25 13:35:00 +04 (1685007300) >>> >>> 2023-05-25 13:37:13 weewx[989] DEBUG weewx.restx: StationRegistry url: >>> ' >>> http://weewx.com/register/register.cgi?station_url=www.kitebeachcenter.ae&description=Mikoko%2C+UAQ&latitude=25.5388&longitude=55.6287&station_type=WeatherFlowUDP&station_model=%3Cbound+method+WeatherFlowUDPDriver.hardware_name+of+%3Cuser.weatherflowudp.WeatherFlowUDPDriver+object+at+0x1061ec940%3E%3E&python_info=3.10.8&platform_info=macOS-12.5-x86_64-i386-64bit&config_path=%2FUsers%2FShared%2Fweewx%2Fweewx.conf&entry_path=%2FUsers%2FShared%2Fweewx%2Fbin%2Fweewxd&weewx_info=4.10.2 >>> ' >>> >>> 2023-05-25 13:37:13 weewx[989] DEBUG weewx.restx: StationRegistry: >>> Failed upload attempt 3: HTTP Error 400: BAD REQUEST >>> >>> 2023-05-25 13:37:13 weewx[989] ERROR weewx.restx: StationRegistry: >>> Failed to publish record 2023-05-25 13:35:00 +04 (1685007300): Failed >>> upload after 3 tries >>> >>> >>> >>> On Mon, May 22, 2023 at 3:28 AM Tom Keffer <[email protected]> wrote: >>> >>>> Right you are. >>>> >>>> Fixed. >>>> >>>> On Sun, May 21, 2023 at 2:40 PM [email protected] <[email protected]> >>>> wrote: >>>> >>>>> Sorry, I was in a hurry and wasn’t clear. I think StationRegistry and >>>>> WindGuru are both failing. >>>>> Re: StationRegistry >>>>> Go to http://weewx.com/stations.html. Nothing is displayed. The GET >>>>> request to /api/v2/stations/?limit=2000 is also returning a 502. So, like >>>>> you said, seems like a server issue… >>>>> rich >>>>> >>>>> On Sunday, 21 May 2023 at 16:22:54 UTC-4 Tom Keffer wrote: >>>>> >>>>>> Oops. Missed that! Thanks, Rich. >>>>>> >>>>>> Not sure why the registry would return that error. Try debug=2 in >>>>>> weewx.conf, restart weewxd, let it run for a reporting cycle of two, then >>>>>> post the log. Option debug=2 will log the full URL used for the GET to >>>>>> the >>>>>> registry. >>>>>> >>>>>> >>>>>> >>>>>> On Sun, May 21, 2023 at 12:53 PM [email protected] <[email protected]> >>>>>> wrote: >>>>>> >>>>>>> Tom, >>>>>>> I think the 502 is from station registry. Nothing is displaying on >>>>>>> the map and GET stations is returning a 502 >>>>>>> rich >>>>>>> >>>>>>> On Sunday, 21 May 2023 at 11:59:08 UTC-4 Tom Keffer wrote: >>>>>>> >>>>>>>> I don't know anything about the windguru uploader. You can try >>>>>>>> asking the author. >>>>>>>> >>>>>>>> I will say that "Bad Gateway" usually means a problem with a load >>>>>>>> balancing server, or something like that. It could be a problem on the >>>>>>>> windguru end. >>>>>>>> >>>>>>>> There's also a pending "pull request >>>>>>>> <https://github.com/claudobahn/weewx-windguru/pull/4>" that >>>>>>>> updates how authentication is done. Perhaps that's the problem? Don't >>>>>>>> know. >>>>>>>> You can give it a try. >>>>>>>> >>>>>>>> -tk >>>>>>>> >>>>>>>> On Sun, May 21, 2023 at 8:47 AM [email protected] < >>>>>>>> [email protected]> wrote: >>>>>>>> >>>>>>>>> Thank you for the replies and suggestions. The logging is now >>>>>>>>> working to /var/log/weewx.log >>>>>>>>> >>>>>>>>> When I run weewx directly I can see the sensor data coming in. It >>>>>>>>> seems like it's just the final step when it uploads the data to >>>>>>>>> windguru >>>>>>>>> that it is failing. I have confirmed that the station details are >>>>>>>>> correct. >>>>>>>>> When I ping windguru.cz, there is a reply. Any ideas? >>>>>>>>> >>>>>>>>> 2023-05-21 19:35:41 weewx[3859] DEBUG weewx.reportengine: Report >>>>>>>>> 'RSYNC' not enabled. Skipping. >>>>>>>>> 2023-05-21 19:35:44 weewx[3859] DEBUG weewx.restx: WindGuru: >>>>>>>>> Failed upload attempt 2: Server response: b'ERROR (no data)' >>>>>>>>> 2023-05-21 19:35:45 weewx[3859] DEBUG weewx.restx: >>>>>>>>> StationRegistry: Failed upload attempt 2: HTTP Error 502: Bad Gateway >>>>>>>>> 2023-05-21 19:35:50 weewx[3859] DEBUG weewx.restx: WindGuru: >>>>>>>>> Failed upload attempt 3: Server response: b'ERROR (no data)' >>>>>>>>> 2023-05-21 19:35:50 weewx[3859] ERROR weewx.restx: WindGuru: >>>>>>>>> Failed to publish record 2023-05-21 19:35:00 +04 (1684683300): Failed >>>>>>>>> upload after 3 tries >>>>>>>>> 2023-05-21 19:35:51 weewx[3859] DEBUG weewx.restx: >>>>>>>>> StationRegistry: Failed upload attempt 3: HTTP Error 502: Bad Gateway >>>>>>>>> 2023-05-21 19:35:51 weewx[3859] ERROR weewx.restx: >>>>>>>>> StationRegistry: Failed to publish record 2023-05-21 19:35:00 +04 >>>>>>>>> (1684683300): Failed upload after 3 tries >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> On Sunday, May 21, 2023 at 3:43:15 PM UTC+4 Tom Keffer wrote: >>>>>>>>> >>>>>>>>>> I have never been able to get system logging from Python to work >>>>>>>>>> on the Mac. I'm sure it can be done --- I just don't know how. If you >>>>>>>>>> Google around, apparently others have struggled to get it to work as >>>>>>>>>> well. >>>>>>>>>> >>>>>>>>>> Instead, I just log to a rotating file. See the section *Logging >>>>>>>>>> to rotating files >>>>>>>>>> <https://github.com/weewx/weewx/wiki/WeeWX-v4-and-logging#logging-to-rotating-files>* >>>>>>>>>> in >>>>>>>>>> the Wiki. The example logs to /var/log/weewx.log, which will >>>>>>>>>> require root privileges. Another option is to log to >>>>>>>>>> /Users/Shared/weewx/weewx.log, or some other place where you >>>>>>>>>> don't need those privileges. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Sun, May 21, 2023 at 2:47 AM Graham Eddy <[email protected]> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>>> tom did not say that 4.10.2 removed [Logging], he did ask you to >>>>>>>>>>> remove that section temporarily, to get it to use default, in case >>>>>>>>>>> your own >>>>>>>>>>> content of that section was wrong. tom said that you were using a >>>>>>>>>>> specific >>>>>>>>>>> item (i think it was ‘rotate’) that was removed in 4.10.2 and thus >>>>>>>>>>> causing >>>>>>>>>>> your runtime error >>>>>>>>>>> >>>>>>>>>>> i think in macOS the default behaviour is to log under >>>>>>>>>>> /var/log/system.log >>>>>>>>>>> >>>>>>>>>>> once the default configuration is working, no doubt you will add >>>>>>>>>>> some entries to [Logging] to use a file of your choice, such as >>>>>>>>>>> /var/log/weewx.log >>>>>>>>>>> *⊣GE⊢* >>>>>>>>>>> >>>>>>>>>>> On 21 May 2023, at 7:33 pm, [email protected] < >>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>> >>>>>>>>>>> However, I am still having some problem and I'm struggling to >>>>>>>>>>> identify exactly what because I'm not sure how to check the logs on >>>>>>>>>>> MacOS. >>>>>>>>>>> I'm sorry for the noob question, but can someone please guide me on >>>>>>>>>>> where >>>>>>>>>>> weewx is logging to? I can confirm that it is not >>>>>>>>>>> /var/log/weewx.log or >>>>>>>>>>> /var/tmp/weewx.log. Originally I had added a [Logging] section in >>>>>>>>>>> weewx.conf but now the weewx 4.10.2 has removed that functionality >>>>>>>>>>> I am not >>>>>>>>>>> sure how else to log weewx output to a different file. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>> >>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/ADD2976B-D69E-4BD4-A23F-FA1D439063DC%40geddy.au >>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/ADD2976B-D69E-4BD4-A23F-FA1D439063DC%40geddy.au?utm_medium=email&utm_source=footer> >>>>>>>>>>> . >>>>>>>>>>> >>>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "weewx-user" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to [email protected]. >>>>>>>>> >>>>>>>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/weewx-user/c18a02bc-6371-49a8-ad07-42e794b524e9n%40googlegroups.com >>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/c18a02bc-6371-49a8-ad07-42e794b524e9n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>> . >>>>>>>>> >>>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "weewx-user" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> >>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/weewx-user/e6b2b60e-e273-4834-b63d-c3685146aadfn%40googlegroups.com >>>>>>> <https://groups.google.com/d/msgid/weewx-user/e6b2b60e-e273-4834-b63d-c3685146aadfn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>> . >>>>>>> >>>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "weewx-user" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/weewx-user/3e6bdfd7-595f-415f-95b2-e3423e2426b4n%40googlegroups.com >>>>> <https://groups.google.com/d/msgid/weewx-user/3e6bdfd7-595f-415f-95b2-e3423e2426b4n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> >>>> -- >>>> You received this message because you are subscribed to a topic in the >>>> Google Groups "weewx-user" group. >>>> To unsubscribe from this topic, visit >>>> https://groups.google.com/d/topic/weewx-user/H2wz1mwlK7I/unsubscribe. >>>> To unsubscribe from this group and all its topics, send an email to >>>> [email protected]. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/CAPq0zEB9YcwJOoh_BuY2uYFyHe8dYdTeGtex5K2TXhP9z37vQw%40mail.gmail.com >>>> <https://groups.google.com/d/msgid/weewx-user/CAPq0zEB9YcwJOoh_BuY2uYFyHe8dYdTeGtex5K2TXhP9z37vQw%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/CALeSoZk4de5ZuO39OD63h68bBr%3DhOnBmSXihswDSkTqW%3Dy%2BSZQ%40mail.gmail.com >>> <https://groups.google.com/d/msgid/weewx-user/CALeSoZk4de5ZuO39OD63h68bBr%3DhOnBmSXihswDSkTqW%3Dy%2BSZQ%40mail.gmail.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/f5440388-4345-4995-ac21-917111ae3218n%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/f5440388-4345-4995-ac21-917111ae3218n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAPq0zEA0okYnY5x4%3DOj7dR9w5%2BDgumNdyzC6HEpoLPygZDOvCg%40mail.gmail.com.
