v0.5.0b5 is in place and i continue to get timeouts and restarts. (logging issue is resolved; i am preferring to continue in this thread for situational continuity e.g. logs are all relevant)
in brief, at intermittent times (less than an hour apart to several days apart), i get three no-response exceptions so a crash/restart of driver. until several weeks ago it worked happily without timeouts. i have moved to different power source; was on UPS and now is not. i have replaced old gw1000 unit with new gw2000 unit with no noticeable improvement. i have changed [GW1000]socket_timout to 10s, then to 6s to avoid unfortunate congruity with polling_interval=10s, with no noticeable change the only environmental change i can think of was introducing dnsmasq for dns/dhcp into home office network but that was months ago, but i did drop a secondary, non-authoritative dsnmasq server on the weewx server somewhere about this timeframe (hence my idle wonder about dhcp lease interference) i have now instrumented the driver with lots more debug statements around every step of sending command & receiving response with gw1000, set the [GW1000]socket_timeout back to 2s, and wait to see what i learn from this extra level of detail. cheers ⊣GE⊢ > On 26 May 2023, at 8:03 pm, gjr80 <[email protected]> wrote: > > v0.5.0b5 has been released for close on a year, it would essentially have > been v0.5.0 but never got around to releasing it. It should be stable -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/03C245E5-9D9F-44BD-97D6-94E8CC007F00%40geddy.au.
