Thanks for the pointers, I see what I can/will do.
On Tuesday, May 30, 2023 at 12:31:00 AM UTC+2 gjr80 wrote: > I think you are going to run into a few challenges doing what you want. > The CWOP uploader uploads a fixed set of obs, if you want to change this > you will need to modify the CWOP uploader code in weewx/restx.py (refer class > StdCWOP > <https://github.com/weewx/weewx/blob/master/bin/weewx/restx.py#L1108> and > class > CWOPThread > <https://github.com/weewx/weewx/blob/master/bin/weewx/restx.py#L1146>). > There are no user configurable options for limiting the uploaded fields. I > have no idea if CWOP will accept a cut down suite of obs, CWOP is not a > service I use nor am I familiar with it. > > In terms of removing the 'weewx 4 simulator' comment, this is hard coded > in the CWOP uploader (WeeWX, WeeWX version and station type). Station type > is picked up from the driver, so you either need to find a BME280 driver > (you have a BME280 service witch is quite distinct from a driver) or you > need to change the CWOP uploader code. > > If you end up modifying code I strongly suggest your final solution > involve sub-classing the CWOP uploader, this will prevent future WeeWX > updates possibly overwriting your code. > > Gary > On Tuesday, 30 May 2023 at 07:36:57 UTC+10 [email protected] wrote: > >> I did install the extention/service bme280,wx and it works , but how do i >> stop weewx for running the simulator >> >> On Monday, May 29, 2023 at 3:35:21 PM UTC+2 Mark Fraser wrote: >> >>> On 29/05/2023 13:27, [email protected] wrote: >>> > I have no weather-station connected to weewx. but running a BME280 as >>> a >>> > service and reporting to CWOP. >>> > >>> > how can I change the comment from weewx 4 simulator , to BME280? >>> > how only to report the readings from BME280 (temp, Hym, bao) to CWOP , >>> > and not all the simulated date like wind and rain? >>> > >>> > greetings from a sunny day. >>> >>> You could try installing https://gitlab.com/wjcarpenter/bme280wx and >>> setting all of the must_have options to empty strings. >>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/cd50a425-536e-48d8-a61f-8586d58c5936n%40googlegroups.com.
