What does one do with a driver issue if the person that wrote it is not
around?
I reprogrammed my rm young 26800 to mimic a response one unit. Used 2to3 on
rmyro.py to fix errors since it was python2 not 3 and got it to run, data
was collected and reports generated. But there are some issues, one is it
looks to be in debug mode always dumping lots of data on what it is doing,
two is that it double posts to WU. I have tried setting log success to
false no change, tried wee_device rm_young.conf -- help to configure it and
it just ends showing nothing. All of these things work fine on my other
station which uses the CC3000 driver. I know nothing about programming in
python, I have looked at the other drivers to see if maybe I could mimic a
different wx station but all seem to have interaction with the device and I
can't mimic that. Any help or suggestions would be appreciated.
Below is an example of what I amy trying to fix.
Jul 17 10:10:03 Satcom python3[32727]: weewx-rm_young[32727] INFO
weewx.restx: Wunderground-RF: Published record 2023-07-17 10:10:03 PDT
(1689613803)
Jul 17 10:10:03 Satcom python3[32727]: weewx-rm_young[32727] INFO
weewx.restx: Wunderground-RF: Published record 2023-07-17 10:10:03 PDT
(1689613803)
Jul 17 10:10:04 Satcom python3[32261]: weewx-rainwise[32261] INFO
weewx.restx: Wunderground-RF: Published record 2023-07-17 10:10:00 PDT
(1689613800)
Jul 17 10:10:05 Satcom weewxd[32727]: rmyro: primary raw: 0A 30 20 30 39 2E
33 31 20 32 30 32 2E 30 20 30 32 34 2E 35 20 30 33 34 2E 33 20 30 39 31 34
2E 36 20 30 30 30 30 30 20 30 30 2A 30 31 39 34 36 0D
Jul 17 10:10:05 Satcom weewxd[32727]: rmyro: primary parsed: {'wind_speed':
9.31, 'wind_dir': 202.0, 'temperature': 24.5, 'humidity': 34.3, 'pressure':
914.6, 'rain': 0.0}
Jul 17 10:10:05 Satcom weewxd[32727]: rmyro: mapped: {'windSpeed': 9.31,
'windDir': 202.0, 'outTemp': 24.5, 'outHumidity': 34.3, 'pressure': 914.6,
'rain_total': 0.0, 'dateTime': 1689613806, 'usUnits': 17, 'rain': 0.0}
Jul 17 10:10:05 Satcom weewxd[32727]: rmyro: primary raw: 0A 30 20 30 39 2E
38 35 20 31 39 37 2E 31 20 30 32 34 2E 35 20 30 33 34 2E 33 20 30 39 31 34
2E 36 20 30 30 30 30 30 20 30 30 2A 30 31 39 36 39 0D
Jul 17 10:10:05 Satcom weewxd[32727]: rmyro: primary parsed: {'wind_speed':
9.85, 'wind_dir': 197.1, 'temperature': 24.5, 'humidity': 34.3, 'pressure':
914.6, 'rain': 0.0}
Jul 17 10:10:05 Satcom weewxd[32727]: rmyro: mapped: {'windSpeed': 9.85,
'windDir': 197.1, 'outTemp': 24.5, 'outHumidity': 34.3, 'pressure': 914.6,
'rain_total': 0.0, 'dateTime': 1689613806, 'usUnits': 17, 'rain': 0.0}
Jul 17 10:10:05 Satcom weewxd[32727]: rmyro: primary raw: 0A 30 20 30 38 2E
34 38 20 32 30 30 2E 35 20 30 32 34 2E 35 20 30 33 34 2E 33 20 30 39 31 34
2E 36 20 30 30 30 30 30 20 30 30 2A 30 31 39 35 36 0D
Jul 17 10:10:05 Satcom weewxd[32727]: rmyro: primary parsed: {'wind_speed':
8.48, 'wind_dir': 200.5, 'temperature': 24.5, 'humidity': 34.3, 'pressure':
914.6, 'rain': 0.0}
Jul 17 10:10:05 Satcom weewxd[32727]: rmyro: mapped: {'windSpeed': 8.48,
'windDir': 200.5, 'outTemp': 24.5, 'outHumidity': 34.3, 'pressure': 914.6,
'rain_total': 0.0, 'dateTime': 1689613806, 'usUnits': 17, 'rain': 0.0}
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/be2ca54e-9729-443a-b6c9-45f0c7b9497an%40googlegroups.com.
