I added support for WN34L sensor. It proved out not too difficult. I am
mapping it to extraTemp2 (beware, you might want to map it to another
temperature if that one is already used).
I also get the battery value for the sensor, in tf_battery1, but I am
unsure where to map this to. There doesn't seem to be any adequate field.
This is the patch - hope it helps someone out.
diff --git a/bin/user/interceptor.py b/bin/user/interceptor.py
index dd721f0..1c0f930 100644
--- a/bin/user/interceptor.py
+++ b/bin/user/interceptor.py
@@ -385,7 +385,7 @@ class Consumer(object):
'UV': 'uv',
'txBatteryStatus': 'battery',
'extraTemp1': 'temperature_1',
- 'extraTemp2': 'temperature_2',
+ 'extraTemp2': 'wn34_temperature_1',
'extraTemp3': 'temperature_3',
'extraHumid1': 'humidity_1',
'extraHumid2': 'humidity_2',
@@ -2365,6 +2365,8 @@ class EcowittClient(Consumer):
'wh65batt': 'wh65_battery',
'pm25_ch1': 'pm2_5',
'pm25batt1': 'pm25_battery',
+ 'tf_ch1' : 'wn34_temperature_1',
+ 'tf_battery1' : 'wn34_battery_1'
}
IGNORED_LABELS = [
(END)
-- Axelle.
On Thursday, October 5, 2023 at 8:49:45 PM UTC+2 Invisible Man wrote:
> Hi,
>
> I have an EcoWitt HP2551AE and have recently acquired a WN34L sensor. Can
> you help me get the data to WeeWx?
> I am using the Interceptor (
> https://github.com/matthewwall/weewx-interceptor), but I think it does
> not recognize the sensor out of the box:
>
> Oct 5 20:43:25 vegan weewx[22719] INFO user.interceptor: unrecognized
> parameter tf_ch1=74.1
> Oct 5 20:43:25 vegan weewx[22719] INFO user.interceptor: unrecognized
> parameter tf_batt1=1.54
>
> That's the data. It's 74.1 °F (23.4 °C)
>
> Thanks,
> Axelle.
> On Tuesday, December 28, 2021 at 7:27:51 AM UTC+1 Rainer Lang wrote:
>
>> Werner's interceptor driver is mainly meant for FOSHK clone consoles like
>> the HP350x or HP2551 which do not have an API which can be actively queried
>> by weewx. It interpretes the http posts of these consoles using the custom
>> server functionality
>>
>> As for the GW1x00, WH2650, WN19x0 and the GW2000 consoles who possess an
>> (the same) API, Gary's GW1000 API driver is the better choice.
>>
>> You need the respective [GW1000] entries in weewx.conf and the entry
>> station_type = GW1000 in the [Station] section. see below
>>
>> As the GW1000 can only receive a dynamic IP address, it is recommended to
>> make an IP address binding in your router, i.e. associate the IP address
>> with the MAC address (--> WS View Device List) of the GW1000.
>> This makes sure that after a reboot of the GW1000 (e.g. firmware updated,
>> power loss) or of the router,
>> the IP address doesn't change and weewx won't find it anymore.
>>
>> [GW1000]
>> driver = user.gw1000
>> ip_address = your-GW1000-ip-address
>> poll_interval = 10
>>
>> [[field_map_extensions]]
>> # WeeWX field name = GW1000 field name
>> rainEvent = rainevent
>> #WH45 5-in-1 sensor data
>> pm10 = pm10
>> co2 = co2
>> pm2_55 = pm255
>> pm2_55_24hav = pm255_24hav
>> pm10_24hav = pm10_24_hav
>> co2_24hav = co2_24hav
>> wh45_batt = wh45_batt
>> wh45_sig = wh45_sig
>>
>> in [StdCalibrate] [[Corrections]] you need an extra entry for solar
>> radiation due to the way the GW1000 reads radiation observations from the
>> sensors
>>
>> [StdCalibrate]
>>
>> [[Corrections]]
>> # For each type, an arbitrary calibration expression can be given.
>> # It should be in the units defined in the StdConvert section.
>> # Example:
>> foo = foo + 0.2
>> radiation = luminosity/126.7 if luminosity is not None else None
>>
>> Your [Accumulator] section should look like below
>> # Options for extension 'GW1000'
>> [Accumulator]
>> [[outTemp]]
>> extractor = max
>> [[radiation]]
>> extractor = max
>> [[wh65_batt]]
>> extractor = last
>> [[wh51_ch8_batt]]
>> extractor = last
>> [[wh31_ch1_batt]]
>> extractor = last
>> [[pm2_52_24hav]]
>> extractor = last
>> [[pm2_51_24hav]]
>> extractor = last
>> [[totalRain]]
>> extractor = last
>> # *************************
>> [[rainEvent]]
>> extractor = last
>> # *************************
>> [[wh51_ch1_batt]]
>> extractor = last
>> [[wh31_ch3_batt]]
>> extractor = last
>> [[wh55_ch4_batt]]
>> extractor = last
>> [[wh51_ch3_batt]]
>> extractor = last
>> [[yearRain]]
>> extractor = last
>> [[pm2_53_24hav]]
>> extractor = last
>> [[wh41_ch3_batt]]
>> extractor = last
>> [[wh51_ch16_batt]]
>> extractor = last
>> [[pm2_54_24hav]]
>> extractor = last
>> [[wh51_ch4_batt]]
>> extractor = last
>> [[wh57_batt]]
>> extractor = last
>> [[wh41_ch1_batt]]
>> extractor = last
>> [[lightning_strike_count]]
>> extractor = sum
>> [[wh40_batt]]
>> extractor = last
>> [[wh25_batt]]
>> extractor = last
>> [[daymaxwind]]
>> extractor = last
>> [[wh31_ch7_batt]]
>> extractor = last
>> [[dayRain]]
>> extractor = last
>> [[wh31_ch5_batt]]
>> extractor = last
>> [[wh31_ch8_batt]]
>> extractor = last
>> [[wh51_ch15_batt]]
>> extractor = last
>> [[wh31_ch6_batt]]
>> extractor = last
>> [[wh31_ch2_batt]]
>> extractor = last
>> [[wh51_ch14_batt]]
>> extractor = last
>> [[wh31_ch4_batt]]
>> extractor = last
>> [[monthRain]]
>> extractor = last
>> [[ws80_batt]]
>> extractor = last
>> [[stormRain]]
>> extractor = last
>> [[wh55_ch3_batt]]
>> extractor = last
>> [[weekRain]]
>> extractor = last
>> [[wh51_ch6_batt]]
>> extractor = last
>> [[hourRain]]
>> extractor = last
>> [[wh51_ch10_batt]]
>> extractor = last
>> [[wh51_ch13_batt]]
>> extractor = last
>> [[wh41_ch4_batt]]
>> extractor = last
>> [[wh68_batt]]
>> extractor = last
>> [[lightning_distance]]
>> extractor = last
>> [[wh51_ch11_batt]]
>> extractor = last
>> [[wh51_ch7_batt]]
>> extractor = last
>> [[wh51_ch2_batt]]
>> extractor = last
>> [[wh26_batt]]
>> extractor = last
>> [[wh55_ch1_batt]]
>> extractor = last
>> [[wh55_ch2_batt]]
>> extractor = last
>> [[wh51_ch12_batt]]
>> extractor = last
>> [[wh51_ch5_batt]]
>> extractor = last
>> [[wh51_ch9_batt]]
>> extractor = last
>> [[lightning_last_det_time]]
>> extractor = last
>> [[wh41_ch2_batt]]
>> extractor = last
>> [[24havpm255]]
>> extractor = last
>> [[wh45_batt]]
>> extractor = last
>> [[wh45_sig]]
>> extractor = last
>> [[lightningcount]]
>> extractor = last
>> [[pm2_51_24h_avg]]
>> extractor = last
>> [[pm2_52_24h_avg]]
>> extractor = last
>> [[pm2_53_24h_avg]]
>> extractor = last
>> [[pm2_54_24h_avg]]
>> extractor = last
>> [[pm2_55_24h_avg]]
>> extractor = last
>> [[pm10_24h_avg]]
>> extractor = last
>> [[co2_24h_avg]]
>> extractor = last
>> [[wh35_ch1_batt]]
>> extractor = last
>> [[wh35_ch2_batt]]
>> extractor = last
>> [[wh35_ch3_batt]]
>> extractor = last
>> [[wh35_ch4_batt]]
>> extractor = last
>> [[wh35_ch5_batt]]
>> extractor = last
>> [[wh35_ch6_batt]]
>> extractor = last
>> [[wh35_ch7_batt]]
>> extractor = last
>> [[wh35_ch8_batt]]
>> extractor = last
>> [[wh40_sig]]
>> extractor = last
>> [[wh26_sig]]
>> extractor = last
>> [[wh25_sig]]
>> extractor = last
>> [[wh65_sig]]
>> extractor = last
>> [[wh31_ch1_sig]]
>> extractor = last
>> [[wh31_ch2_sig]]
>> extractor = last
>> [[wh31_ch3_sig]]
>> extractor = last
>> [[wh31_ch4_sig]]
>> extractor = last
>> [[wh31_ch5_sig]]
>> extractor = last
>> [[wh31_ch6_sig]]
>> extractor = last
>> [[wh31_ch7_sig]]
>> extractor = last
>> [[wh31_ch8_sig]]
>> extractor = last
>> [[wh35_ch1_sig]]
>> extractor = last
>> [[wh35_ch2_sig]]
>> extractor = last
>> [[wh35_ch3_sig]]
>> extractor = last
>> [[wh35_ch4_sig]]
>> extractor = last
>> [[wh35_ch5_sig]]
>> extractor = last
>> [[wh35_ch6_sig]]
>> extractor = last
>> [[wh35_ch7_sig]]
>> extractor = last
>> [[wh35_ch8_sig]]
>> extractor = last
>> [[wh41_ch1_sig]]
>> extractor = last
>> [[wh41_ch2_sig]]
>> extractor = last
>> [[wh41_ch3_sig]]
>> extractor = last
>> [[wh41_ch4_sig]]
>> extractor = last
>> [[wh51_ch1_sig]]
>> extractor = last
>> [[wh51_ch2_sig]]
>> extractor = last
>> [[wh51_ch3_sig]]
>> extractor = last
>> [[wh51_ch4_sig]]
>> extractor = last
>> [[wh51_ch5_sig]]
>> extractor = last
>> [[wh51_ch6_sig]]
>> extractor = last
>> [[wh51_ch7_sig]]
>> extractor = last
>> [[wh51_ch8_sig]]
>> extractor = last
>> [[wh51_ch9_sig]]
>> extractor = last
>> [[wh51_ch10_sig]]
>> extractor = last
>> [[wh51_ch11_sig]]
>> extractor = last
>> [[wh51_ch12_sig]]
>> extractor = last
>> [[wh51_ch13_sig]]
>> extractor = last
>> [[wh51_ch14_sig]]
>> extractor = last
>> [[wh51_ch15_sig]]
>> extractor = last
>> [[wh51_ch16_sig]]
>> extractor = last
>> [[wh55_ch1_sig]]
>> extractor = last
>> [[wh55_ch2_sig]]
>> extractor = last
>> [[wh55_ch3_sig]]
>> extractor = last
>> [[wh55_ch4_sig]]
>> extractor = last
>> [[wh57_sig]]
>> extractor = last
>> [[wh68_sig]]
>> extractor = last
>> [[ws80_sig]]
>> extractor = last
>> [[wh24_batt]]
>> extractor = last
>> [[wh24_sig]]
>> extractor = last
>> On 27.12.2021 17:08, Jonathan Zitelman wrote:
>>
>> Thanks Tom, I had previously tried Gary's driver with no luck. Werner's
>> Interceptor driver as noted above by Ranier seems to have fixed things all
>> around. It's Ecowitt specific, but accounts for all of their available
>> sensors.
>>
>> Might be worth updating the extensions page on the wiki with one of the
>> more up-to-date drivers since Matthew doesn't seem to be updating his
>> anymore.
>>
>> -Jonathan
>>
>> On Mon, Dec 27, 2021 at 7:20 AM Tom Keffer <[email protected]> wrote:
>>
>>> I'm not an expert on the GW1000, but have you tried Gary Roderick's
>>> driver?
>>>
>>> https://github.com/gjr80/weewx-gw1000
>>>
>>> On Sun, Dec 26, 2021 at 9:51 PM [email protected] <[email protected]>
>>> wrote:
>>>
>>>> Ranier, thank you for the lead. I downloaded Werner's complete
>>>> installation file in the last post, but continue to encounter a
>>>> UnicodeDecodeError. I am trying to figure out from his first post, steps
>>>> to do it manually, but my German is elementary level and I am a bit lost.
>>>> I think I can update Matthew's driver for the WH57 and WN34L, but just
>>>> don't understand why the existing WH31 temps don't transfer to the
>>>> database
>>>> even though Weewx seems to accept them.
>>>>
>>>> -Jonathan
>>>> On Wednesday, December 22, 2021 at 11:49:48 PM UTC-6
>>>> [email protected] wrote:
>>>>
>>>>> Matthew's Interceptor driver doesn't handle that (yet ?).
>>>>> As you seem to be living in Germany resp. speaking German, have a look
>>>>> at
>>>>>
>>>>> https://www.pc-wetterstation.de/forum/viewtopic.php?f=26&t=10333&sid=bf68867d7a6c245e55636c156d07330b
>>>>> where a modified Interceptor driver is described (and downloadable)
>>>>> which covers all recent sensors from the Ecowitt ecosystem. And it's
>>>>> working ! 😎
>>>>> best regards
>>>>> Rainer
>>>>>
>>>>> On 22.12.2021 23:39, [email protected] wrote:
>>>>>
>>>>> I am running Weewx 4.5.1 using Matthew's Interceptor driver in
>>>>> ecowitt-client mode to parse data from an Ecowitt GW1000. I recently
>>>>> supplemented my Ecowitt setup with a few additional sensors and cannot
>>>>> seem
>>>>> to get them to parse properly.
>>>>>
>>>>> A few rounds of the syslog:
>>>>> Dec 22 16:20:54 Gugelhupf weewx[20166] DEBUG weewx.manager: Daily
>>>>> summary version is 1.0
>>>>> Dec 22 16:20:55 Gugelhupf weewx[20166] DEBUG weewx.manager: Daily
>>>>> summary version is 1.0
>>>>> Dec 22 16:20:56 Gugelhupf weewx[20166] DEBUG weewx.manager: Daily
>>>>> summary version is 4.0
>>>>> Dec 22 16:20:58 Gugelhupf weewx[20166] INFO weewx.imagegenerator:
>>>>> Generated 16 images for report StandardReport in 7.17 seconds
>>>>> Dec 22 16:20:58 Gugelhupf weewx[20166] INFO weewx.reportengine: Copied
>>>>> 9 files to /var/www/html/weewx
>>>>> Dec 22 16:20:58 Gugelhupf weewx[20166] DEBUG weewx.reportengine:
>>>>> Running report 'cmon'
>>>>> Dec 22 16:20:58 Gugelhupf weewx[20166] DEBUG weewx.reportengine: Found
>>>>> configuration file /etc/weewx/skins/cmon/skin.conf for report 'cmon'
>>>>> Dec 22 16:20:58 Gugelhupf weewx[20166] DEBUG weewx.cheetahgenerator:
>>>>> Using search list ['weewx.cheetahgenerator.Almanac',
>>>>> 'weewx.cheetahgenerator.Station', 'weewx.cheetahgenerator.Current',
>>>>> 'weewx.cheetahgenerator.Stats', 'weewx.cheetahgenerator.UnitInfo',
>>>>> 'weewx.cheetahgenerator.Extras', 'weewx.cheetahgenerator.JSONHelpers']
>>>>> Dec 22 16:20:58 Gugelhupf weewx[20166] DEBUG weewx.manager: Daily
>>>>> summary version is 4.0
>>>>> Dec 22 16:20:58 Gugelhupf weewx[20166] INFO weewx.cheetahgenerator:
>>>>> Generated 1 files for report cmon in 0.20 seconds
>>>>> Dec 22 16:20:58 Gugelhupf weewx[20166] DEBUG weewx.manager: Daily
>>>>> summary version is 4.0
>>>>> Dec 22 16:20:58 Gugelhupf weewx[20166] DEBUG PIL.PngImagePlugin:
>>>>> STREAM 'IHDR' 16 13
>>>>> Dec 22 16:20:58 Gugelhupf weewx[20166] DEBUG PIL.PngImagePlugin:
>>>>> STREAM 'IDAT' 41 1216
>>>>> Dec 22 16:21:04 Gugelhupf weewx[20166] DEBUG user.interceptor: empty
>>>>> queue
>>>>> Dec 22 16:21:10 Gugelhupf weewx[20166] DEBUG user.interceptor: POST:
>>>>> PASSKEY=XXXX&stationtype=GW1000B_V1.6.8&dateutc=2021-12-22+22:21:10&tempinf=71.6&humidityin=53&baromrelin=29.406&baromabsin=29.406&tempf=74.1&humidity=50&winddir=149&windspeedmph=1.57&windgustmph=4.47&maxdailygust=5.82&solarradiation=21.16&uv=0&rainratein=0.000&eventrainin=0.000&hourlyrainin=0.000&dailyrainin=0.000&weeklyrainin=0.110&monthlyrainin=1.091&yearlyrainin=50.925&totalrainin=50.925&temp2f=71.60&humidity2=55&lightning_time=1639936192&lightning_num=0&lightning=14&tf_ch1=58.8&wh65batt=0&batt2=0&wh57batt=4&tf_batt1=1.40&freq=915M&model=GW1000_Pro
>>>>> Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: raw
>>>>> data:
>>>>> PASSKEY=3190878978C9C58F9A8EE5E46324353B&stationtype=GW1000B_V1.6.8&dateutc=2021-12-22+22:21:10&tempinf=71.6&humidityin=53&baromrelin=29.406&baromabsin=29.406&tempf=74.1&humidity=50&winddir=149&windspeedmph=1.57&windgustmph=4.47&maxdailygust=5.82&solarradiation=21.16&uv=0&rainratein=0.000&eventrainin=0.000&hourlyrainin=0.000&dailyrainin=0.000&weeklyrainin=0.110&monthlyrainin=1.091&yearlyrainin=50.925&totalrainin=50.925&temp2f=71.60&humidity2=55&lightning_time=1639936192&lightning_num=0&lightning=14&tf_ch1=58.8&wh65batt=0&batt2=0&wh57batt=4&tf_batt1=1.40&freq=915M&model=GW1000_Pro
>>>>> Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: ignored
>>>>> parameter eventrainin=0.000
>>>>> Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: ignored
>>>>> parameter baromrelin=29.406
>>>>> Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: ignored
>>>>> parameter maxdailygust=5.82
>>>>> Dec 22 16:21:11 Gugelhupf weewx[20166] INFO user.interceptor:
>>>>> unrecognized parameter lightning_time=1639936192
>>>>> Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: ignored
>>>>> parameter monthlyrainin=1.091
>>>>> Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: ignored
>>>>> parameter PASSKEY=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
>>>>> Dec 22 16:21:11 Gugelhupf weewx[20166] INFO user.interceptor:
>>>>> unrecognized parameter tf_ch1=58.8
>>>>> Dec 22 16:21:11 Gugelhupf weewx[20166] INFO user.interceptor:
>>>>> unrecognized parameter lightning_num=0
>>>>> Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: ignored
>>>>> parameter hourlyrainin=0.000
>>>>> Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: ignored
>>>>> parameter freq=915M
>>>>> Dec 22 16:21:11 Gugelhupf weewx[20166] INFO user.interceptor:
>>>>> unrecognized parameter tf_batt1=1.40
>>>>> Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: ignored
>>>>> parameter model=GW1000_Pro
>>>>> Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: ignored
>>>>> parameter yearlyrainin=50.925
>>>>> Dec 22 16:21:11 Gugelhupf weewx[20166] INFO user.interceptor:
>>>>> unrecognized parameter wh57batt=4
>>>>> Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: ignored
>>>>> parameter dailyrainin=0.000
>>>>> Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: ignored
>>>>> parameter stationtype=GW1000B_V1.6.8
>>>>> Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: ignored
>>>>> parameter weeklyrainin=0.110
>>>>> Dec 22 16:21:11 Gugelhupf weewx[20166] INFO user.interceptor:
>>>>> unrecognized parameter lightning=14
>>>>> Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: raw
>>>>> packet: {'wind_speed': 1.57, 'humidity_in': 53.0, 'temperature_in': 71.6,
>>>>> 'solar_radiation': 21.16, 'wind_gust': 4.47, 'humidity_2': 55.0,
>>>>> 'temperature_2': 71.6, 'wh65_battery': 0.0, 'humidity_out': 50.0, 'uv':
>>>>> 0.0, 'battery_2': 0.0, 'rain': 0.0, 'dateTime': 1640211670, 'pressure':
>>>>> 29.406, 'temperature_out': 74.1, 'wind_dir': 149.0, 'rain_total': 50.925,
>>>>> 'rain_rate': 0.0, 'usUnits': 1}
>>>>> Dec 22 16:21:11 Gugelhupf weewx[20166] DEBUG user.interceptor: mapped
>>>>> packet: {'pressure': 29.406, 'outHumidity': 50.0, 'rainRate': 0.0, 'UV':
>>>>> 0.0, 'radiation': 21.16, 'rain': 0.0, 'dateTime': 1640211670, 'windDir':
>>>>> 149.0, 'outTemp': 74.1, 'windSpeed': 1.57, 'extraHumid2': 55.0, 'inTemp':
>>>>> 71.6, 'windGust': 4.47, 'inHumidity': 53.0, 'extraTemp2': 71.6,
>>>>> 'usUnits':
>>>>> 1}
>>>>>
>>>>> I know there are some adjustments I need to make to properly log the
>>>>> lighting sensor (WH57) though I'm not sure which pull request to go with
>>>>> https://github.com/matthewwall/weewx-interceptor/pull/72 or
>>>>> https://github.com/matthewwall/weewx-interceptor/pull/99. Pull #72
>>>>> looks more straight forward for a direct edit and I think following that
>>>>> format I could also add support for the WN34L since it's newer and shows
>>>>> up
>>>>> as tf_ch1. Has anyone worked with the newer WN34 sensor?
>>>>>
>>>>> Where I am really lost is why the WH31 is not working correctly.
>>>>> There is not a parameter issue shown, and temp2f seems to be in the
>>>>> existing map in the interceptor driver. I have checked my MySQL database
>>>>> and there is no data in the extraTemp2 or extraHumid2 fields. Is there
>>>>> another step I missed?
>>>>>
>>>>> Associated section of weewx.conf:
>>>>> [[[[Generic]]]]
>>>>> barometer = Barometer
>>>>> dewpoint = Dew Point
>>>>> ET = ET
>>>>> heatindex = Heat Index
>>>>> inHumidity = Inside Humidity
>>>>> inTemp = Inside Temperature
>>>>> outHumidity = Humidity
>>>>> outTemp = Outside Temperature
>>>>> radiation = Radiation
>>>>> rain = Rain
>>>>> rainRate = Rain Rate
>>>>> UV = UV Index
>>>>> windDir = Wind Direction
>>>>> windGust = Gust Speed
>>>>> windGustDir = Gust Direction
>>>>> windSpeed = Wind Speed
>>>>> windchill = Wind Chill
>>>>> windgustvec = Gust Vector
>>>>> windvec = Wind Vector
>>>>> extraTemp1 = Pi CPU
>>>>> extraTemp2 = Shop Temperature
>>>>> extraTemp3 = Temperature3
>>>>>
>>>>> Thanks in advance,
>>>>> Jonathan
>>>>>
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "weewx-user" group.
>>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>>> an email to [email protected].
>>>>> To view this discussion on the web visit
>>>>> https://groups.google.com/d/msgid/weewx-user/6fd27041-4429-4718-b922-4dd53d5fcd46n%40googlegroups.com
>>>>>
>>>>> <https://groups.google.com/d/msgid/weewx-user/6fd27041-4429-4718-b922-4dd53d5fcd46n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>> .
>>>>>
>>>>>
>>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "weewx-user" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an email to [email protected].
>>>> To view this discussion on the web visit
>>>> https://groups.google.com/d/msgid/weewx-user/ed54e2ae-7b54-40db-810d-0158b791c16cn%40googlegroups.com
>>>>
>>>> <https://groups.google.com/d/msgid/weewx-user/ed54e2ae-7b54-40db-810d-0158b791c16cn%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>> .
>>>>
>>> --
>>> You received this message because you are subscribed to a topic in the
>>> Google Groups "weewx-user" group.
>>> To unsubscribe from this topic, visit
>>> https://groups.google.com/d/topic/weewx-user/JpcVnLfT7lI/unsubscribe.
>>> To unsubscribe from this group and all its topics, send an email to
>>> [email protected].
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/weewx-user/CAPq0zEAKJHB-kjQV4t91X7nJgD7JA1Ahbj5g%3DKbE9%2BzL49SoQw%40mail.gmail.com
>>>
>>> <https://groups.google.com/d/msgid/weewx-user/CAPq0zEAKJHB-kjQV4t91X7nJgD7JA1Ahbj5g%3DKbE9%2BzL49SoQw%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>> .
>>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected].
>>
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/CAFwS2r06COLt-hmwJD2kg1QnrSEmYs2qk1r0zn-T7rO3S6z5Jg%40mail.gmail.com
>>
>> <https://groups.google.com/d/msgid/weewx-user/CAFwS2r06COLt-hmwJD2kg1QnrSEmYs2qk1r0zn-T7rO3S6z5Jg%40mail.gmail.com?utm_medium=email&utm_source=footer>
>> .
>>
>>
>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/bf976163-75dd-4c0d-9b68-9e0b2cc03548n%40googlegroups.com.
