Hi,
I have been using weewx for a while now and have an issue that seems to
come every few years.
Weewx will die after reveiving the 1st SDR paquet. Last time, I thought
that maybe the receiver was dead, and I replaced it (but kept the old one
just in case, as it did not seem dead when using rtl_433 directly)
Today, it happened again. So I put back the old sdr receiver, but no better.
have tried running the sdr.py plugin, and it does not die, nor show any
error. Packets jsut come in and are logged on screen.
Is there a way to find which condition triggers the sdr shutdown from weewx
main process, upon receiving a SDR packet?
Thank you.
ps :
I was running 4.5.1 until this morning. I ran an upgrade and update to
4.10.2 just in case, but no channge.
Here is the syslog showing the shutdown
Oct 21 12:50:15 weatherpi weewx[14101] INFO __main__: retrying...
Oct 21 12:50:15 weatherpi weewx[14101] INFO weewx.engine: Loading station
type SDR (user.sdr)
Oct 21 12:50:15 weatherpi weewx[14101] INFO user.sdr: driver version is 0.78
Oct 21 12:50:15 weatherpi weewx[14101] INFO user.sdr: sensor map is
{'windGust': 'wind_gust.0:*.OSWGR800Packet', 'windSpeed':
'wind_speed.0:*.OSWGR800Packet', 'windBatteryStatus':
'battery.0:*.OSWGR800Packet', 'windDir': 'wind_dir.0:*.OSWGR800Packet',
'rain_total': 'rain_total.0:*.OSPCR800Packet', 'rainBatteryStatus':
'battery.0:*.OSPCR800Packet', 'extraTemp1':
'temperature_C.1:*.AmbientWeather-TX8300', 'UV':
'uv_index.1:*.OSUV800Packet', 'inTemp': 'temperature.1:*.OSBTHGN129Packet',
'inHumidity': 'humidity.1:*.OSBTHGN129Packet', 'inTempBatteryStatus':
'battery.1:*.OSBTHGN129Packet', 'outTemp':
'temperature.1:*.OSTHGR810Packet', 'outTempBatteryStatus':
'battery.2:*.OSTHGR810Packet', 'Humidity': 'humidity.1:*.OSTHGR810Packet'}
Oct 21 12:50:15 weatherpi weewx[14101] INFO user.sdr: deltas is {'rain':
'rain_total', 'strikes': 'strikes_total'}
Oct 21 12:50:15 weatherpi weewx[14101] INFO user.sdr: startup process
'rtl_433 -F json -M utc'
Oct 21 12:50:15 weatherpi weewx[14101] INFO user.sdr: startup process
'['rtl_433', '-F', 'json', '-M', 'utc']'
Oct 21 12:50:16 weatherpi /weewxd: SDS011: sds011 Extension version is 0.1
Oct 21 12:50:16 weatherpi /weewxd: SDS011: model is SDS011
Oct 21 12:50:16 weatherpi /weewxd: SDS011: port is /dev/ttyUSB0
Oct 21 12:50:16 weatherpi /weewxd: SDS011: poll interval is 30
Oct 21 12:50:16 weatherpi /weewxd: PiSense: PiSensewx configuration
{'i2c_port': '1', 'i2c_address': '0x5c', 'temperatureKeys': 'extraTemp1',
'pressureKeys': 'pressure', 'humidityKeys': 'outHumidity',
'temperature_must_have': '', 'pressure_mus_have': '', 'humidity_must_have':
''}
Oct 21 12:50:16 weatherpi weewx[14101] INFO user.sdr: shutdown process
rtl_433 -F json -M utc
Oct 21 12:50:16 weatherpi kernel: [ 3384.620882] dvb_usb_v2: 'Realtek
RTL2832U reference design:1-1.5' successfully deinitialized and disconnected
Oct 21 12:50:20 weatherpi kernel: [ 3388.896552] usb 1-1.5: dvb_usb_v2:
found a 'Realtek RTL2832U reference design' in warm state
Oct 21 12:50:20 weatherpi kernel: [ 3388.926802] usb 1-1.5: dvb_usb_v2:
will pass the complete MPEG2 transport stream to the software demuxer
Oct 21 12:50:20 weatherpi kernel: [ 3388.926854] dvbdev: DVB: registering
new adapter (Realtek RTL2832U reference design)
Oct 21 12:50:20 weatherpi kernel: [ 3388.926877] usb 1-1.5: media
controller created
Oct 21 12:50:20 weatherpi kernel: [ 3388.930466] dvbdev:
dvb_create_media_entity: media entity 'dvb-demux' registered.
Oct 21 12:50:20 weatherpi kernel: [ 3388.951861] i2c i2c-11: Added
multiplexed i2c bus 12
Oct 21 12:50:20 weatherpi kernel: [ 3388.951890] rtl2832 11-0010: Realtek
RTL2832 successfully attached
Oct 21 12:50:20 weatherpi kernel: [ 3388.952004] usb 1-1.5: DVB:
registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))...
Oct 21 12:50:20 weatherpi kernel: [ 3388.952047] dvbdev:
dvb_create_media_entity: media entity 'Realtek RTL2832 (DVB-T)' registered.
Oct 21 12:50:20 weatherpi kernel: [ 3388.958988] i2c i2c-12: fc0012:
Fitipower FC0012 successfully identified
Oct 21 12:50:20 weatherpi kernel: [ 3388.984120] rtl2832_sdr
rtl2832_sdr.6.auto: Registered as swradio0
Oct 21 12:50:20 weatherpi kernel: [ 3388.984145] rtl2832_sdr
rtl2832_sdr.6.auto: Realtek RTL2832 SDR attached
Oct 21 12:50:20 weatherpi kernel: [ 3388.984163] rtl2832_sdr
rtl2832_sdr.6.auto: SDR API is still slightly experimental and
functionality changes may follow
Oct 21 12:50:20 weatherpi kernel: [ 3388.992908] Registered IR keymap
rc-empty
Oct 21 12:50:20 weatherpi kernel: [ 3388.993227] rc rc1: Realtek RTL2832U
reference design as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/rc/rc1
Oct 21 12:50:20 weatherpi kernel: [ 3388.993993] rc rc1: lirc_dev: driver
dvb_usb_rtl28xxu registered at minor = 0, raw IR receiver, no transmitter
Oct 21 12:50:20 weatherpi kernel: [ 3388.994260] input: Realtek RTL2832U
reference design as
/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/rc/rc1/input71
Oct 21 12:50:20 weatherpi kernel: [ 3388.996106] usb 1-1.5: dvb_usb_v2:
schedule remote query interval to 200 msecs
Oct 21 12:50:20 weatherpi kernel: [ 3389.004791] usb 1-1.5: dvb_usb_v2:
'Realtek RTL2832U reference design' successfully initialized and connected
Oct 21 12:50:29 weatherpi kernel: [ 3398.340965] dvb_usb_v2: 'Realtek
RTL2832U reference design:1-1.5' successfully deinitialized and disconnected
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/bcc8d36c-2d58-4735-a18a-2ad557c6688an%40googlegroups.com.
