Hello; I lost all the outside sensor readings a few weeks ago; I put this down to the batteries failing. It's a Youshiko 5-in-1 YC9385 and SDR reports it as a Bresser 5-in-1 so it has it's own display and this was indicating batteries.
Having change the batteries (having found the courage to go up the ladder) readings where coming through.. yet weewx still showed n/a These are pulled via SDR - and running this stand-alone showed results coming in. Odd. Solution: it seems when the batteries were changed, the ID reported by the sensor changed. Would have assumed this would be fixed. Previously I used 'temperature.96.Bresser5in1Packet' in the sensor map. Now it's 'temperature.252.Bresser5in1Packet' Once I spotted that and adjusted the configuration all is well! Hope that might help somebody Matthew -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/5cc40de1-5dbb-4bc2-91b9-be4b8a143a43n%40googlegroups.com.
