Thanks Gary, I have raised an issue on his repository. On Thursday, February 1, 2024 at 9:15:39 AM UTC gjr80 wrote:
> Correct, not a RTGD or WeeWX issue. Something perhaps to take up with the > SteelSeries Weather Gauges author > https://github.com/mcrossley/SteelSeries-Weather-Gauges > > Gary > > > On Thursday 1 February 2024 at 19:02:03 UTC+10 [email protected] > wrote: > > I am using the SteelSeries gauges with RTGD on a 3 second update as a > stand-alone weather display on an old iPad. It looks great, however the > constant rescaling of the gauges for no apparent reason is a real problem. > Glancing at the display it should be possible to determine the temperature > and other readings by looking at the needle position without looking at the > numbers. Unfortunately this is not the case due to rescaling. > > The lowest temperature my station has recorded is -4.6ºC and the highest > (which was a very rare one-off) was 25.7ºC, so the scale of -10ºC to +30ºC > is perfect, and I have that set in the script, however it keeps rescaling > to -20ºC to +20ºC for no apparent reason. > > I can cope with the wind speed gauge rescaling, but even there I would > like it to remain 0 - 60mph and only rescale when it goes over 60mph. > Pressure, UV and solar radiation seem to stay at the values I have set. > > Is there any way to prevent the rescaling? I understand this really isn't > a Weewx or RTGD issue but there's maybe a hack out there that I haven't > found. > > Thanks, > > Rory > > You can see the page I use for the iPad here: ttps:// > www.360shetland.co.uk/weather/ss > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/317459eb-0b32-41f8-b47a-cd38e8ad0995n%40googlegroups.com.
