Submitted without comment.
pi@k4spbx:~ $ sudo apt install weewx
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following additional packages will be installed:
python3-cheetah python3-configobj python3-ephem python3-usb
Suggested packages:
python-cheetah-doc python3-markdown python3-memcache python-configobj-doc
sqlite ftp
The following NEW packages will be installed:
python3-cheetah python3-configobj python3-ephem python3-usb weewx
0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded.
Need to get 2,370 kB of archives.
After this operation, 9,616 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:2 https://weewx.com/apt/python3 buster/main all weewx all 5.0.2-1
[1,556 kB]
Get:3 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf
python3-cheetah armhf 3.2.6-1+b1 [142 kB]
Get:1 https://mirrors.gigenet.com/raspbian/raspbian bullseye/main armhf
python3-configobj all 5.0.6-4 [35.8 kB]
Get:4 https://mirrors.gigenet.com/raspbian/raspbian bullseye/main armhf
python3-usb all 1.0.2-2 [38.9 kB]
Get:5 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf
python3-ephem armhf 3.7.7.1-1+b1 [596 kB]
Fetched 2,370 kB in 2s (1,236 kB/s)
Preconfiguring packages ...
Selecting previously unselected package python3-configobj.
(Reading database ... 122765 files and directories currently installed.)
Preparing to unpack .../python3-configobj_5.0.6-4_all.deb ...
Unpacking python3-configobj (5.0.6-4) ...
Selecting previously unselected package python3-cheetah.
Preparing to unpack .../python3-cheetah_3.2.6-1+b1_armhf.deb ...
Unpacking python3-cheetah (3.2.6-1+b1) ...
Selecting previously unselected package python3-usb.
Preparing to unpack .../python3-usb_1.0.2-2_all.deb ...
Unpacking python3-usb (1.0.2-2) ...
Selecting previously unselected package python3-ephem.
Preparing to unpack .../python3-ephem_3.7.7.1-1+b1_armhf.deb ...
Unpacking python3-ephem (3.7.7.1-1+b1) ...
Selecting previously unselected package weewx.
Preparing to unpack .../archives/weewx_5.0.2-1_all.deb ...
Unpacking weewx (5.0.2-1) ...
Setting up python3-usb (1.0.2-2) ...
Setting up python3-ephem (3.7.7.1-1+b1) ...
Setting up python3-cheetah (3.2.6-1+b1) ...
Setting up python3-configobj (5.0.6-4) ...
Setting up weewx (5.0.2-1) ...
Using weewx:weewx as user:group
Creating /etc/default/weewx
Using configuration file /etc/weewx/weewx.conf
Processing configuration file /etc/weewx/weewx.conf
Traceback (most recent call last):
File "/usr/share/weewx/weectl.py", line 74, in <module>
main()
File "/usr/share/weewx/weectl.py", line 66, in main
namespace.func(namespace)
File "/usr/share/weewx/weectllib/__init__.py", line 121, in dispatch
namespace.action_func(config_dict, namespace)
File "/usr/share/weewx/weectllib/station_cmd.py", line 311, in
reconfigure_station
weectllib.station_actions.station_reconfigure(config_dict=config_dict,
File "/usr/share/weewx/weectllib/station_actions.py", line 164, in
station_reconfigure
config_config(config_dict,
File "/usr/share/weewx/weectllib/station_actions.py", line 205, in
config_config
config_latlon(config_dict, latitude=latitude, longitude=longitude,
no_prompt=no_prompt)
File "/usr/share/weewx/weectllib/station_actions.py", line 345, in
config_latlon
config_dict['Station']['longitude'] = float(final_longitude)
ValueError: could not convert string to float: '-89-77993'
dpkg: error processing package weewx (--configure):
installed weewx package post-installation script subprocess returned error
exit status 1
Processing triggers for man-db (2.9.4-2) ...
Errors were encountered while processing:
weewx
E: Sub-process /usr/bin/dpkg returned an error code (1)
pi@k4spbx:~ $ cat /etc/weewx/weewx.conf
# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2024 Tom Keffer <[email protected]>
# See the file LICENSE.txt for your rights.
##############################################################################
# This section is for general configuration information.
# Set to 1 for extra debug info, otherwise comment it out or set to zero.
debug = 0
# Whether to log successful operations. May get overridden below.
log_success = True
# Whether to log unsuccessful operations. May get overridden below.
log_failure = True
# This configuration file was created by ...
version = 5.0.2
##############################################################################
# This section is for information about the station.
[Station]
# Description of the station location, such as your town.
location = WeeWX station
# Latitude in decimal degrees. Negative for southern hemisphere.
latitude = 0.0
# Longitude in decimal degrees. Negative for western hemisphere.
longitude = 0.0
# Altitude of the station, with the unit it is in. This is used only
# if the hardware cannot supply a value.
altitude = 0, foot # Choose 'foot' or 'meter' for unit
# Set to type of station hardware. There must be a corresponding stanza
# in this file, which includes a value for the 'driver' option.
station_type = Simulator
# If you have a website, you may specify an URL. The URL is required if
you
# intend to register your station. The URL must include the scheme, for
# example, "http://"; or "https://";
#station_url = https://www.example.com
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 6
##############################################################################
[Simulator]
# This section is for the weewx weather station simulator.
# The time (in seconds) between LOOP packets.
loop_interval = 2.5
# The simulator mode can be either 'simulator' or 'generator'.
# Real-time simulator. Sleep between each LOOP packet.
mode = simulator
# Generator. Emit LOOP packets as fast as possible (useful for
testing).
#mode = generator
# The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the
# default is to use the present time.
#start = 2011-01-01T00:00
# The driver to use.
driver = weewx.drivers.simulator
##############################################################################
# This section is for uploading data to Internet sites
[StdRESTful]
# Uncomment and change to override logging for uploading services.
# log_success = True
# log_failure = True
[[StationRegistry]]
# To register this weather station at weewx.com, set this to true,
and
# set option 'station_url', located in the [Station] section above.
register_this_station = False
[[AWEKAS]]
# This section is for configuring posts to AWEKAS.
# If you wish to post to AWEKAS, set the option 'enable' to true,
then
# specify a username and password.
# Use quotes around the password to guard against parsing errors.
enable = false
username = replace_me
password = replace_me
[[CWOP]]
# This section is for configuring posts to CWOP.
# If you wish to post to CWOP, set the option 'enable' to true,
# then specify the station ID (e.g., CW1234).
enable = false
station = replace_me
# If this is an APRS (radio amateur) station, specify the
# passcode (e.g., 12345). Otherwise, ignore.
passcode = replace_me
[[PWSweather]]
# This section is for configuring posts to PWSweather.com.
# If you wish to post to PWSweather.com, set the option 'enable' to
# true, then specify a station and password.
# Use quotes around the password to guard against parsing errors.
enable = false
station = replace_me
password = replace_me
[[WOW]]
# This section is for configuring posts to WOW.
# If you wish to post to WOW, set the option 'enable' to true, then
# specify a station and password.
# Use quotes around the password to guard against parsing errors.
enable = false
station = replace_me
password = replace_me
[[Wunderground]]
# This section is for configuring posts to the Weather Underground.
# If you wish to post to the Weather Underground, set the option
# 'enable' to true, then specify a station (e.g., 'KORHOODR3'). Use
# the station key (find it at
# https://www.wunderground.com/member/devices) for the password.
enable = false
station = replace_me
password = replace_me
# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = False
##############################################################################
# This section specifies what reports, using which skins, to generate.
[StdReport]
# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = skins
# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = /var/www/html/weewx
# Uncomment and change to override logging for reports.
# log_success = True
# log_failure = True
# The database binding indicates which data should be used in reports.
data_binding = wx_binding
# Each of the following subsections defines a report that will be run.
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and other
# customizations. Many of those changes can be made here by overriding
# parameters, or by modifying templates within the skin itself.
[[SeasonsReport]]
# The SeasonsReport uses the 'Seasons' skin, which contains the
# images, templates and plots for the report.
skin = Seasons
enable = true
[[SmartphoneReport]]
# The SmartphoneReport uses the 'Smartphone' skin, and the images
and
# files are placed in a dedicated subdirectory.
skin = Smartphone
enable = false
HTML_ROOT = /var/www/html/weewx/smartphone
[[MobileReport]]
# The MobileReport uses the 'Mobile' skin, and the images and files
# are placed in a dedicated subdirectory.
skin = Mobile
enable = false
HTML_ROOT = /var/www/html/weewx/mobile
[[StandardReport]]
# This is the old "Standard" skin. By default, it is not enabled.
skin = Standard
enable = false
[[FTP]]
# FTP'ing the results to a webserver is treated as just another
report,
# albeit one with an unusual report generator!
skin = Ftp
# If you wish to use FTP, set "enable" to "true", then fill out the
# next four lines.
# Use quotes around the password to guard against parsing errors.
enable = false
user = replace_me
password = replace_me
server = replace_me # The ftp server name, e.g, www.myserver.org
path = replace_me # The destination directory, e.g., /weather
# Set to True for an FTP over TLS (FTPS) connection. Not all servers
# support this.
secure_ftp = False
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Most FTP servers use port 21.
port = 21
# Set to 1 to use passive mode, zero for active mode
passive = 1
[[RSYNC]]
# rsync'ing to a webserver is treated as just another report.
skin = Rsync
# If you wish to use rsync, you must configure passwordless ssh
using
# public/private key authentication from the user account that weewx
# runs to the user account on the remote machine where the files
# will be copied.
#
# If you wish to use rsync, set "enable" to "true", then
# fill out server, user, and path.
# The server should appear in your .ssh/config file.
# The user is the username used in the identity file.
# The path is the destination directory, such as
/var/www/html/weather.
# Be sure that the user has write permissions on the destination!
enable = false
server = replace_me
user = replace_me
path = replace_me
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Rsync can be configured to remove files from the remote server if
# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
# make a mistake in the remote path, you could could unintentionally
# cause unrelated files to be deleted. Set to 1 to enable remote
file
# deletion, zero to allow files to accumulate remotely.
delete = 0
# Options in the [[Defaults]] section below will apply to all reports.
# What follows are a few of the more popular options you may want to
# uncomment, then change.
[[Defaults]]
# Which language to use for all reports. Not all skins support all
# languages. You can override this for individual reports.
lang = en
# Which unit system to use for all reports. Choices are 'us',
'metric',
# or 'metricwx'. You can override this for individual reports.
unit_system = us
[[[Units]]]
# Option "unit_system" above sets the general unit system, but
# overriding specific unit groups is possible. These are popular
# choices. Uncomment and set as appropriate. The unit is always
# in the singular, e.g., 'mile_per_hour', NOT 'miles_per_hour'
[[[[Groups]]]]
# group_altitude = meter # Options are
'foot' or 'meter'
# group_pressure = mbar # Options are
'inHg', 'mmHg', 'mbar', or 'hPa'
# group_rain = mm # Options are
'inch', 'cm', or 'mm'
# group_rainrate = mm_per_hour # Options are
'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
# group_temperature = degree_C # Options are
'degree_C', 'degree_F', or 'degree_K'
# The following line is used to keep the above lines
indented
# properly. It can be ignored.
unused = unused
# Uncommenting the following section frequently results in more
# attractive formatting of times and dates, but may not work in
# your locale.
[[[[TimeFormats]]]]
# day = %H:%M
# week = %H:%M on %A
# month = %d-%b-%Y %H:%M
# year = %d-%b-%Y %H:%M
# rainyear = %d-%b-%Y %H:%M
# current = %d-%b-%Y %H:%M
# ephem_day = %H:%M
# ephem_year = %d-%b-%Y %H:%M
# The following line is used to keep the above lines
indented
# properly. It can be ignored.
unused = unused
[[[Labels]]]
# Users frequently change the labels for these observation
types.
[[[[Generic]]]]
# inHumidity = Inside Humidity
# inTemp = Inside Temperature
# outHumidity = Outside Humidity
# outTemp = Outside Temperature
# extraTemp1 = Temperature1
# extraTemp2 = Temperature2
# extraTemp3 = Temperature3
# The following line is used to keep the above lines
indented
# properly. It can be ignored.
unused = unused
##############################################################################
# This service converts the unit system coming from the hardware to a unit
# system in the database.
[StdConvert]
# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of
units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.
# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
##############################################################################
# This section can adjust data using calibration expressions.
[StdCalibrate]
[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2
##############################################################################
# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.
[StdQC]
[[MinMax]]
barometer = 26, 32.5, inHg
pressure = 24, 34.5, inHg
outTemp = -40, 120, degree_F
inTemp = 10, 120, degree_F
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 120, mile_per_hour
rain = 0, 10, inch
##############################################################################
# This section controls the origin of derived values.
[StdWXCalculate]
[[Calculations]]
# How to calculate derived quantities. Possible values are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx
pressure = prefer_hardware
altimeter = prefer_hardware
appTemp = prefer_hardware
barometer = prefer_hardware
cloudbase = prefer_hardware
dewpoint = prefer_hardware
ET = prefer_hardware
heatindex = prefer_hardware
humidex = prefer_hardware
inDewpoint = prefer_hardware
maxSolarRad = prefer_hardware
rainRate = prefer_hardware
windchill = prefer_hardware
windrun = prefer_hardware
##############################################################################
# For hardware that supports it, this section controls how often the
# onboard clock gets updated.
[StdTimeSynch]
# How often to check the weather station clock for drift (in seconds)
clock_check = 14400
# How much it can drift before we will correct it (in seconds)
max_drift = 5
##############################################################################
# This section is for configuring the archive service.
[StdArchive]
# If the station hardware supports data logging then the archive
interval
# will be downloaded from the station. Otherwise, specify it (in
seconds).
archive_interval = 300
# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = hardware
# Whether to include LOOP data in hi/low statistics.
loop_hilo = True
# Uncomment and change to override logging for archive operations.
# log_success = True
# log_failure = True
# The data binding used to save archive records.
data_binding = wx_binding
##############################################################################
# This section binds a data store to a database.
[DataBindings]
[[wx_binding]]
# The database must match one of the sections in [Databases].
# This is likely to be the only option you would want to change.
database = archive_sqlite
# The name of the table within the database.
table_name = archive
# The manager handles aggregation of data for historical summaries.
manager = weewx.manager.DaySummaryManager
# The schema defines the structure of the database.
# It is *only* used when the database is created.
schema = schemas.wview_extended.schema
##############################################################################
# This section defines various databases.
[Databases]
# A SQLite database is simply a single file.
[[archive_sqlite]]
database_name = weewx.sdb
database_type = SQLite
# MySQL
[[archive_mysql]]
database_name = weewx
database_type = MySQL
##############################################################################
# This section defines defaults for the different types of databases.
[DatabaseTypes]
# Defaults for SQLite databases.
[[SQLite]]
driver = weedb.sqlite
# Directory in which database files are located, relative to
WEEWX_ROOT
SQLITE_ROOT = /var/lib/weewx
# Defaults for MySQL databases.
[[MySQL]]
driver = weedb.mysql
# The host where the database is located.
host = localhost
# The user name for logging in to the host.
user = weewx
# Use quotes around the password to guard against parsing errors.
password = weewx
##############################################################################
# This section configures the internal weewx engine.
[Engine]
# This section specifies which services should be run and in what order.
[[Services]]
prep_services = weewx.engine.StdTimeSynch
data_services = ,
process_services = weewx.engine.StdConvert,
weewx.engine.StdCalibrate, weewx.engine.StdQC,
weewx.wxservices.StdWXCalculate
xtype_services = weewx.wxxtypes.StdWXXTypes,
weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater,
weewx.wxxtypes.StdDelta
archive_services = weewx.engine.StdArchive
restful_services = weewx.restx.StdStationRegistry,
weewx.restx.StdWunderground, weewx.restx.StdPWSweather,
weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
report_services = weewx.engine.StdPrint, weewx.engine.StdReport
On Sunday, February 18, 2024 at 10:47:39 PM UTC-6 Adam White wrote:
> Also, where was that long. persisting if I deleted ALL those files? This
> install, or lack thereof, displayed some bizarre behavior to say the least.
>
> On Sunday, February 18, 2024 at 10:35:45 PM UTC-6 Adam White wrote:
>
>> I double checked weewx.conf and it was a decimal so something was
>> haywire. I grep'd /etc and /var and deleted nearly everything weewx
>> touched. Was waiting for more feedback before continuing with reinstall.
>>
>> On Sunday, February 18, 2024 at 12:47:45 PM UTC-6 [email protected]
>> wrote:
>>
>>> Maybe , first of all, change
>>>
>>> [Station]
>>> longitude = -89-77993
>>>
>>> to
>>>
>>> [Station]
>>> longitude = -89.77993
>>>
>>> in your weewx.conf and see, if this helps you getting rid of all this
>>> crap.
>>> Adam White schrieb am Sonntag, 18. Februar 2024 um 19:33:01 UTC+1:
>>>
>>>> Hi I'm stuck trying to install weewx on a pi 3b+ running bullseye. I
>>>> used apt install weewx and went through the configure options but it
>>>> apparently didn't like my inputs. Before completing the install it errored
>>>> out.
>>>> I tried sudo dpkg --configure -a and it never worked until I deleted
>>>> /var/lib/dpkg/info/weewx*
>>>> I would think after deleting that, running apt purge weewx and deleting
>>>> the following:
>>>>
>>>> sudo rm -r /etc/weewx
>>>>
>>>> sudo rm -r /var/www/html/weewx
>>>>
>>>> sudo rm -r /var/lib/weewx
>>>>
>>>> sudo rm -r /etc/weewx
>>>>
>>>> sudo rm /etc/default/weewx
>>>>
>>>> sudo rm -r /usr/share/weewx
>>>>
>>>> It would be able to start fresh but that's not the case.
>>>>
>>>>
>>>> Today I deleted all the above again, did a sudo apt install weewx and
>>>> had this output:
>>>>
>>>>
>>>> pi@k4spbx:~ $ sudo apt install weewx
>>>>
>>>> Reading package lists... Done
>>>> Building dependency tree... Done
>>>> Reading state information... Done
>>>> Suggested packages:
>>>> sqlite ftp
>>>> The following NEW packages will be installed:
>>>> weewx
>>>> 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
>>>> Need to get 0 B/1,556 kB of archives.
>>>> After this operation, 5,720 kB of additional disk space will be used.
>>>> Preconfiguring packages ...
>>>> Selecting previously unselected package weewx.
>>>> (Reading database ... 122960 files and directories currently installed.)
>>>> Preparing to unpack .../archives/weewx_5.0.2-1_all.deb ...
>>>> Unpacking weewx (5.0.2-1) ...
>>>> Setting up weewx (5.0.2-1) ...
>>>> Using weewx:weewx as user:group
>>>> Creating /etc/default/weewx
>>>> Using configuration file /etc/weewx/weewx.conf
>>>> Processing configuration file /etc/weewx/weewx.conf
>>>> Traceback (most recent call last):
>>>> File "/usr/share/weewx/weectl.py", line 74, in <module>
>>>> main()
>>>> File "/usr/share/weewx/weectl.py", line 66, in main
>>>> namespace.func(namespace)
>>>> File "/usr/share/weewx/weectllib/__init__.py", line 121, in dispatch
>>>> namespace.action_func(config_dict, namespace)
>>>> File "/usr/share/weewx/weectllib/station_cmd.py", line 311, in reconfi
>>>> gure_station
>>>> weectllib.station_actions.station_reconfigure(config_dict=config_dic
>>>> t,
>>>> File "/usr/share/weewx/weectllib/station_actions.py", line 164, in sta
>>>> tion_reconfigure
>>>> config_config(config_dict,
>>>> File "/usr/share/weewx/weectllib/station_actions.py", line 205, in con
>>>> fig_config
>>>> config_latlon(config_dict, latitude=latitude, longitude=longitude, n
>>>> o_prompt=no_prompt)
>>>> File "/usr/share/weewx/weectllib/station_actions.py", line 345, in con
>>>> fig_latlon
>>>> config_dict['Station']['longitude'] = float(final_longitude)
>>>> ValueError: could not convert string to float: '-89-77993'
>>>> dpkg: error processing package weewx (--configure):
>>>> installed weewx package post-installation script subprocess returned er
>>>> ror exit status 1
>>>> Errors were encountered while processing:
>>>> weewx
>>>> E: Sub-process /usr/bin/dpkg returned an error code (1)
>>>>
>>>>
>>>> Followed by:
>>>>
>>>> pi@k4spbx:~ $ sudo dpkg --configure -a
>>>> Setting up weewx (5.0.2-1) ...
>>>> Using weewx:weewx as user:group
>>>> Saving old defaults to /etc/default/weewx-20240218113817
>>>> Creating /etc/default/weewx
>>>> Using configuration file /etc/weewx/weewx.conf
>>>> Processing configuration file /etc/weewx/weewx.conf
>>>> Traceback (most recent call last):
>>>> File "/usr/share/weewx/weectl.py", line 74, in <module>
>>>> main()
>>>> File "/usr/share/weewx/weectl.py", line 66, in main
>>>> namespace.func(namespace)
>>>> File "/usr/share/weewx/weectllib/__init__.py", line 121, in dispatch
>>>> namespace.action_func(config_dict, namespace)
>>>> File "/usr/share/weewx/weectllib/station_cmd.py", line 311, in
>>>> reconfigure_station
>>>>
>>>> weectllib.station_actions.station_reconfigure(config_dict=config_dict,
>>>> File "/usr/share/weewx/weectllib/station_actions.py", line 164, in
>>>> station_reconfigure
>>>> config_config(config_dict,
>>>> File "/usr/share/weewx/weectllib/station_actions.py", line 205, in
>>>> config_config
>>>> config_latlon(config_dict, latitude=latitude, longitude=longitude,
>>>> no_prompt=no_prompt)
>>>> File "/usr/share/weewx/weectllib/station_actions.py", line 345, in
>>>> config_latlon
>>>> config_dict['Station']['longitude'] = float(final_longitude)
>>>> ValueError: could not convert string to float: '-89-77993'
>>>> dpkg: error processing package weewx (--configure):
>>>> installed weewx package post-installation script subprocess returned
>>>> error exit status 1
>>>> Errors were encountered while processing:
>>>> weewx
>>>>
>>>>
>>>>
>>>> How do I actually delete all this crap, actually purge and then start
>>>> fresh?
>>>>
>>>> Thanks.
>>>>
>>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/9371fc02-7ccb-4acc-b442-4a1119a24855n%40googlegroups.com.
