Hi
Been running weewx for many years now. Just upgrade from 4.10 to 5.1.0-2
on a Raspberry Pi with a Davis Vantage Vue console.
Everything is working good, but the /var/www/html/weewx directory is not
getting populated. There is an NOAA directory (looked like weewx wrote
it) in there.
There is data being uploaded to the external sites but I can't use the web
page. Using lighttpd as the webserver.
Using configuration file /etc/weewx/weewx.conf
System info
Platform: Linux-5.10.103-v7+-armv7l-with-glibc2.36
Python Version: 3.11.2
Load Information
1 minute load average: 1.82
5 minute load average: 2.22
15 minute load average: 2.10
General Weewx info
Weewx version 5.1.0 detected.
Currently installed extensions
No extensions installed.
Archive info
Database name: weewx
Table name: archive
Version 4.0
Unit system: 1 (US)
First good timestamp: 2018-05-21 17:25:00 EDT (1526937900)
Last good timestamp: 2024-07-06 14:59:00 EDT (1720292340)
Number of records: 2860861
weewx (weewx.conf) is set to use an archive interval of 60 seconds.
The station hardware was not interrogated to determine the archive
interval.
Supported SQL keys
dateTime usUnits interval
barometer pressure altimeter
inTemp outTemp inHumidity
outHumidity windSpeed windDir
windGust windGustDir rainRate
rain dewpoint windchill
heatindex ET radiation
UV extraTemp1 extraTemp2
extraTemp3 soilTemp1 soilTemp2
soilTemp3 soilTemp4 leafTemp1
leafTemp2 extraHumid1 extraHumid2
soilMoist1 soilMoist2 soilMoist3
soilMoist4 leafWet1 leafWet2
rxCheckPercent txBatteryStatus consBatteryVoltage
hail hailRate heatingTemp
heatingVoltage supplyVoltage referenceVoltage
windBatteryStatus rainBatteryStatus outTempBatteryStatus
inTempBatteryStatus
Databases configured in weewx.conf:
archive_sqlite:
database_name weewx.sdb
driver weedb.sqlite
SQLITE_ROOT /var/lib/weewx
archive_mysql:
database_name weewx
driver weedb.mysql
host localhost
user weewx
password weewx
--- Start configuration file /etc/weewx/weewx.conf ---
# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2015 Tom Keffer <[email protected]>
# See the file LICENSE.txt for your rights.
##############################################################################
# This section is for general configuration information.
# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 1
# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /etc/weewx
# Whether to log successful operations
log_success = True
# Whether to log unsuccessful operations
log_failure = True
# How long to wait before timing out a socket (FTP, HTTP) connection
socket_timeout = 20
# Do not modify this. It is used when installing and updating weewx.
version = 5.1.0
config_path = /etc/weewx/weewx.conf
WEEWX_ROOT_CONFIG = /etc/weewx
##############################################################################
# This section is for information about the station.
[Station]
# Description of the station location
location = "Minoa, NY"
# Latitude and longitude in decimal degrees
latitude = xx.xxxxx
longitude = -xx.xxxxx
# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 410, foot
# Set to type of station hardware. There must be a corresponding stanza
# in this file with a 'driver' parameter indicating the driver to be
used.
station_type = Vantage
# If you have a website, you may specify an URL
#station_url = http://www.example.com
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 6
##############################################################################
[Vantage]
# This section is for the Davis Vantage series of weather stations.
# Connection type: serial or ethernet
# serial (the classic VantagePro)
# ethernet (the WeatherLinkIP)
type = serial
# If the connection type is serial, a port must be specified:
# Debian, Ubuntu, Redhat, Fedora, and SuSE:
# /dev/ttyUSB0 is a common USB port name
# /dev/ttyS0 is a common serial port name
# BSD:
# /dev/cuaU0 is a common serial port name
port = /dev/ttyUSB0
# If the connection type is ethernet, an IP Address/hostname is
required:
#host = 1.2.3.4
######################################################
# The rest of this section rarely needs any attention.
# You can safely leave it "as is."
######################################################
# Serial baud rate (usually 19200)
baudrate = 19200
# TCP port (when using the WeatherLinkIP)
tcp_port = 22222
# TCP send delay (when using the WeatherLinkIP):
tcp_send_delay = 0.5
# The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both
loop_request = 1
# The id of your ISS station (usually 1). If you use a wind meter
connected
# to a anemometer transmitter kit, use its id
iss_id = 1
# How long to wait for a response from the station before giving up (in
# seconds; must be greater than 2)
timeout = 8
# How long to wait before trying again (in seconds)
wait_before_retry = 5
# How many times to try before giving up:
max_tries = 10
# Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2
model_type = 2
# The driver to use:
driver = weewx.drivers.vantage
##############################################################################
# This section is for uploading data to Internet sites
[StdRESTful]
[[StationRegistry]]
# To register this weather station with weewx, set this to true
register_this_station = false
[[AWEKAS]]
# This section is for configuring posts to AWEKAS.
# If you wish to do this, set the option 'enable' to true,
# and specify a username and password.
enable = true
username = XXXXXX
# To guard against parsing errors, put your password in quotes:
password = XXXXXX
[[CWOP]]
# This section is for configuring posts to CWOP.
# If you wish to do this, set the option 'enable' to true,
# and specify the station ID (e.g., CW1234).
enable = true
station = XXXXXX
# If this is an APRS (radio amateur) station, uncomment
# the following and replace with a passcode (e.g., 12345).
#passcode = replace_me (APRS stations only)
[[PWSweather]]
# This section is for configuring posts to PWSweather.com.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
enable = true
station = XXXXXX
# To guard against parsing errors, put your password in quotes:
password = XXXXXX
[[WOW]]
# This section is for configuring posts to WOW.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
enable = false
station = XXXXXX
# To guard against parsing errors, put your password in quotes:
password = XXXXXX
[[Wunderground]]
# This section is for configuring posts to the Weather Underground.
# If you wish to do this, set the option 'enable' to true,
# and specify a station (e.g., 'KORHOODR3') and password.
enable = true
station = XXXXXX
# To guard against parsing errors, put your password in quotes:
password = XXXXXX
# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = true
# If you plan on using wunderfixer, set the following
# to your API key:
api_key = XXXXXX
##############################################################################
# This section specifies what reports, using which skins, to generate.
[StdReport]
# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = /etc/weewx/skins
# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = /var/www/html/weewx
# The database binding indicates which data should be used in reports.
data_binding = wx_binding
####
# Each of the following subsections defines a report that will be run.
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and other
# customizations. Many of those changes can be made here by overriding
# parameters, or by modifying templates within the skin itself.
[[StandardReport]]
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and
other
# customizations. Many of those changes can be made here by
overriding
# parameters, or by modifying templates within the skin itself.
# The StandardReport uses the 'Standard' skin, which contains the
# images, templates and plots for the report.
skin = Standard
enable = False
[[[Units]]]
[[[[Groups]]]]
group_altitude = foot
group_speed2 = mile_per_hour2
group_pressure = inHg
group_rain = inch
group_rainrate = inch_per_hour
group_temperature = degree_F
group_degree_day = degree_F_day
group_speed = mile_per_hour
[[SeasonsReport]]
# The SeasonsReport uses the 'Seasons' skin, which contains the
# images, templates and plots for the report.
skin = Seasons
enable = True
[[SmartphoneReport]]
# The SmartphoneReport uses the 'Smartphone' skin, and the images
and
# files are placed in a dedicated subdirectory.
skin = Smartphone
enable = false
HTML_ROOT = public_html/smartphone
[[MobileReport]]
# The MobileReport uses the 'Mobile' skin, and the images and files
# are placed in a dedicated subdirectory.
skin = Mobile
enable = false
HTML_ROOT = public_html/mobile
[[FTP]]
# FTP'ing the results to a webserver is treated as just another
report,
# albeit one with an unusual report generator!
skin = Ftp
# If you wish to use FTP, uncomment and fill out the next four
lines.
#user = replace with the ftp username
#password = replace with the ftp password; put in quotes to guard
against parsing errors.
#server = replace with the ftp server name, e.g, www.threefools.org
#path = replace with the ftp destination directory (e.g., /weather)
# Set to True for an FTP over TLS (FTPS) connection. Not all servers
# support this.
secure_ftp = False
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Most FTP servers use port 21
port = 21
# Set to 1 to use passive mode, zero for active mode
passive = 1
[[RSYNC]]
# rsync'ing to a webserver is treated as just another report
skin = Rsync
# If you wish to use rsync, you must configure passwordless ssh
using
# public/private key authentication from the user account that weewx
# runs as to the user account on the remote machine where the files
# will be copied.
#
# The following three lines determine where files will be sent.
#server = replace with the rsync server name, e.g,
www.threefools.org
#path = replace with the rsync destination directory (e.g.,
/weather)
#user = replace with the rsync username
# Rsync can be configured to remove files from the remote server if
# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
# make a mistake in the remote path, you could could unintentionally
# cause unrelated files to be deleted. Set to 1 to enable remote
file
# deletion, zero to allow files to accumulate remotely.
delete = 0
####
# Various options for customizing your reports.
[[Defaults]]
# The following section determines the selection and formatting of
units.
[[[Units]]]
# The following section sets what unit to use for each unit
group.
# NB: The unit is always in the singular. I.e., 'mile_per_hour',
# NOT 'miles_per_hour'
[[[[Groups]]]]
group_altitude = foot # Options are 'foot' or 'meter'
group_degree_day = degree_F_day # Options are
'degree_F_day' or 'degree_C_day'
group_pressure = inHg # Options are 'inHg', 'mmHg',
'mbar', or 'hPa'
group_rain = inch # Options are 'inch', 'cm', or 'mm'
group_rainrate = inch_per_hour # Options are
'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
group_speed = mile_per_hour # Options are
'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second'
group_speed2 = mile_per_hour2 # Options are
'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2'
group_temperature = degree_F # Options are 'degree_F' or
'degree_C'
# The following section sets the formatting for each type of
unit.
[[[[StringFormats]]]]
centibar = %.0f
cm = %.2f
cm_per_hour = %.2f
degree_C = %.1f
degree_F = %.1f
degree_compass = %.0f
foot = %.0f
hPa = %.1f
hour = %.1f
inHg = %.3f
inch = %.2f
inch_per_hour = %.2f
km_per_hour = %.0f
km_per_hour2 = %.1f
knot = %.0f
knot2 = %.1f
mbar = %.1f
meter = %.0f
meter_per_second = %.1f
meter_per_second2 = %.1f
mile_per_hour = %.0f
mile_per_hour2 = %.1f
mm = %.1f
mmHg = %.1f
mm_per_hour = %.1f
percent = %.0f
second = %.0f
uv_index = %.1f
volt = %.1f
watt_per_meter_squared = %.0f
NONE = " N/A"
# The following section sets the label to be used for each type
of unit
[[[[Labels]]]]
day = " day", " days"
hour = " hour", " hours"
minute = " minute", " minutes"
second = " second", " seconds"
NONE = ""
# The following section sets the format to be used for each
time scale.
# The values below will work in every locale, but they may not
look
# particularly attractive. See the Customization Guide for
alternatives.
[[[[TimeFormats]]]]
hour = %H:%M
day = %X
week = %X (%A)
month = %x %X
year = %x %X
rainyear = %x %X
current = %x %X
ephem_day = %X
ephem_year = %x %X
[[[[Ordinates]]]]
# Ordinal directions. The last one should be for no wind
direction
directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, SW,
WSW, W, WNW, NW, NNW, N/A
# The following section sets the base temperatures used for the
# calculation of heating and cooling degree-days.
[[[[DegreeDays]]]]
# Base temperature for heating days, with unit:
heating_base = 65, degree_F
# Base temperature for cooling days, with unit:
cooling_base = 65, degree_F
# Base temperature for growing days, with unit:
growing_base = 50.0, degree_F
# A trend takes a difference across a time period. The following
# section sets the time period, and how big an error is allowed
to
# still be counted as the start or end of a period.
[[[[Trend]]]]
time_delta = 10800 # 3 hours
time_grace = 300 # 5 minutes
# The labels to be used for each observation type
[[[Labels]]]
# Set to hemisphere abbreviations suitable for your location:
hemispheres = N, S, E, W
# Formats to be used for latitude whole degrees, longitude whole
# degrees, and minutes:
latlon_formats = %02d, %03d, %05.2f
# Generic labels, keyed by an observation type.
[[[[Generic]]]]
barometer = Barometer
dewpoint = Dew Point
ET = ET
heatindex = Heat Index
inHumidity = Inside Humidity
inTemp = Inside Temperature
outHumidity = Humidity
outTemp = Outside Temperature
radiation = Radiation
rain = Rain
rainRate = Rain Rate
UV = UV Index
windDir = Wind Direction
windGust = Gust Speed
windGustDir = Gust Direction
windSpeed = Wind Speed
windchill = Wind Chill
windgustvec = Gust Vector
windvec = Wind Vector
extraTemp1 = Temperature1
extraTemp2 = Temperature2
extraTemp3 = Temperature3
# Sensor status indicators
rxCheckPercent = Signal Quality
txBatteryStatus = Transmitter Battery
windBatteryStatus = Wind Battery
rainBatteryStatus = Rain Battery
outTempBatteryStatus = Outside Temperature Battery
inTempBatteryStatus = Inside Temperature Battery
consBatteryVoltage = Console Battery
heatingVoltage = Heating Battery
supplyVoltage = Supply Voltage
referenceVoltage = Reference Voltage
[[[Almanac]]]
# The labels to be used for the phases of the moon:
moon_phases = New, Waxing crescent, First quarter, Waxing
gibbous, Full, Waning gibbous, Last quarter, Waning crescent
##############################################################################
# This service acts as a filter, converting the unit system coming from
# the hardware to a unit system in the database.
[StdConvert]
# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of
units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.
# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
##############################################################################
# This section can adjust data using calibration expressions.
[StdCalibrate]
[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2
##############################################################################
# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.
[StdQC]
[[MinMax]]
barometer = 26, 32.5, inHg
outTemp = -40, 120, degree_F
inTemp = 10, 120, degree_F
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 120, mile_per_hour
pressure = 24, 34.5, inHg
##############################################################################
# This section controls the origin of derived values.
[StdWXCalculate]
[[Calculations]]
# Derived quantities are calculated by this service. Possible
values are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx
pressure = prefer_hardware
barometer = prefer_hardware
altimeter = prefer_hardware
windchill = prefer_hardware
heatindex = prefer_hardware
dewpoint = prefer_hardware
inDewpoint = prefer_hardware
rainRate = prefer_hardware
maxSolarRad = prefer_hardware
cloudbase = prefer_hardware
humidex = prefer_hardware
appTemp = prefer_hardware
ET = prefer_hardware
windrun = prefer_hardware
##############################################################################
# For hardware that supports it, this section controls how often the
# onboard clock gets updated.
[StdTimeSynch]
# How often to check the weather station clock for drift (in seconds)
clock_check = 14400
# How much it can drift before we will correct it (in seconds)
max_drift = 5
##############################################################################
# This section is for configuring the archive service.
[StdArchive]
# If the station hardware supports data logging then the archive
interval
# will be downloaded from the station. Otherwise, specify it (in
seconds).
archive_interval = 60
# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = software
# Whether to include LOOP data in hi/low statistics
loop_hilo = True
# The data binding used to save archive records
data_binding = wx_binding
##############################################################################
# This section binds a data store to a database.
[DataBindings]
[[wx_binding]]
# The database must match one of the sections in [Databases].
# This is likely to be the only option you would want to change.
database = archive_mysql
# The name of the table within the database
table_name = archive
# The manager handles aggregation of data for historical summaries
manager = weewx.wxmanager.WXDaySummaryManager
# The schema defines the structure of the database.
# It is *only* used when the database is created.
schema = schemas.wview.schema
##############################################################################
# This section defines various databases.
[Databases]
# A SQLite database is simply a single file
[[archive_sqlite]]
database_type = SQLite
database_name = weewx.sdb
# MySQL
[[archive_mysql]]
database_type = MySQL
database_name = weewx
##############################################################################
# This section defines defaults for the different types of databases.
[DatabaseTypes]
# Defaults for SQLite databases
[[SQLite]]
driver = weedb.sqlite
# Directory in which the database files are located
SQLITE_ROOT = /var/lib/weewx
# Defaults for MySQL databases
[[MySQL]]
driver = weedb.mysql
# The host where the database is located
host = localhost
# The user name for logging in to the host
user = XXXXXX
# The password for the user name. Put in quotes to guard against
parsing errors.
password = XXXXXX
##############################################################################
# This section configures the internal weewx engine.
[Engine]
# This section specifies which services should be run and in what order.
[[Services]]
prep_services = weewx.engine.StdTimeSynch
data_services = ,
process_services = weewx.engine.StdConvert,
weewx.engine.StdCalibrate, weewx.engine.StdQC,
weewx.wxservices.StdWXCalculate
xtype_services = weewx.wxxtypes.StdWXXTypes,
weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater,
weewx.wxxtypes.StdDelta
archive_services = weewx.engine.StdArchive
restful_services = weewx.restx.StdStationRegistry,
weewx.restx.StdWunderground, weewx.restx.StdPWSweather,
weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
report_services = weewx.engine.StdPrint, weewx.engine.StdReport
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/b55e217b-23d1-4229-9bb8-52eb4bd8288bn%40googlegroups.com.
