I installed Weewx 5.1 on a RPI 2 and made a BYOWS station. It worked, but I screwed up installing updates and shutdown the RPI, so my SD was skrewed. I made a new installation, but no having trouble to get Weewx with BYOWS driver working.
BYOWS scripts work, Weewx installing works (works fine with simulator. But when I install BYOWS driver and set the BYOWS as default in weewx.conf I get this error: groetg@byows-jim:~ $ sudo systemctl status weewx × weewx.service - WeeWX Loaded: loaded (/lib/systemd/system/weewx.service; enabled; preset: enabled) Active: failed (Result: exit-code) since Tue 2024-07-09 17:38:35 CEST; 5min ago Duration: 1.661s Docs: https://weewx.com/docs Process: 17613 ExecStart=weewxd /etc/weewx/weewx.conf (code=exited, status=4) Main PID: 17613 (code=exited, status=4) CPU: 1.651s Jul 09 17:38:35 byows-jim weewxd[17613]: CRITICAL weewx.engine: **** File "/usr/local/lib/python3.11/dist-packages/gpiozero/pins/pi.py", line 639, in _set_when_changed Jul 09 17:38:35 byows-jim weewxd[17613]: CRITICAL weewx.engine: **** self._enable_event_detect() Jul 09 17:38:35 byows-jim weewxd[17613]: CRITICAL weewx.engine: **** File "/usr/local/lib/python3.11/dist-packages/gpiozero/pins/rpigpio.py", line 220, in _enable_event_detect Jul 09 17:38:35 byows-jim weewxd[17613]: CRITICAL weewx.engine: **** GPIO.add_event_detect( Jul 09 17:38:35 byows-jim weewxd[17613]: CRITICAL weewx.engine: **** RuntimeError: Failed to add edge detection Jul 09 17:38:35 byows-jim weewxd[17613]: CRITICAL main: Unable to load driver: Failed to add edge detection Jul 09 17:38:35 byows-jim weewxd[17613]: CRITICAL main: **** Exiting... Jul 09 17:38:35 byows-jim systemd[1]: weewx.service: Main process exited, code=exited, status=4/NOPERMISSION Jul 09 17:38:35 byows-jim systemd[1]: weewx.service: Failed with result 'exit-code'. Jul 09 17:38:35 byows-jim systemd[1]: weewx.service: Consumed 1.651s CPU time. DEBUG info: Using configuration file /etc/weewx/weewx.conf System info Platform: Linux-6.6.31+rpt-rpi-v7-armv7l-with-glibc2.36 Python Version: 3.11.2 Load Information 1 minute load average: 0.14 5 minute load average: 0.37 15 minute load average: 0.35 General Weewx info Weewx version 5.1.0 detected. Currently installed extensions Extension Name Version Description byows_rpi 0.51 Bring Your Own Weather Station (BYOWS) Driver for the Raspberry Pi Archive info Database name: weewx.sdb Table name: archive Version 4.0 Unit system: 1 (US) First good timestamp: 2024-07-09 15:50:00 CEST (1720533000) Last good timestamp: 2024-07-09 17:25:00 CEST (1720538700) Number of records: 20 weewx (weewx.conf) is set to use an archive interval of 300 seconds. The station hardware was not interrogated to determine the archive interval. Supported SQL keys dateTime usUnits interval altimeter appTemp appTemp1 barometer batteryStatus1 batteryStatus2 batteryStatus3 batteryStatus4 batteryStatus5 batteryStatus6 batteryStatus7 batteryStatus8 cloudbase co co2 consBatteryVoltage dewpoint dewpoint1 ET extraHumid1 extraHumid2 extraHumid3 extraHumid4 extraHumid5 extraHumid6 extraHumid7 extraHumid8 extraTemp1 extraTemp2 extraTemp3 extraTemp4 extraTemp5 extraTemp6 extraTemp7 extraTemp8 forecast hail hailBatteryStatus hailRate heatindex heatindex1 heatingTemp heatingVoltage humidex humidex1 inDewpoint inHumidity inTemp inTempBatteryStatus leafTemp1 leafTemp2 leafWet1 leafWet2 lightning_distance lightning_disturber_count lightning_energy lightning_noise_count lightning_strike_count luminosity maxSolarRad nh3 no2 noise o3 outHumidity outTemp outTempBatteryStatus pb pm10_0 pm1_0 pm2_5 pressure radiation rain rainBatteryStatus rainRate referenceVoltage rxCheckPercent signal1 signal2 signal3 signal4 signal5 signal6 signal7 signal8 snow snowBatteryStatus snowDepth snowMoisture snowRate so2 soilMoist1 soilMoist2 soilMoist3 soilMoist4 soilTemp1 soilTemp2 soilTemp3 soilTemp4 supplyVoltage txBatteryStatus UV uvBatteryStatus windBatteryStatus windchill windDir windGust windGustDir windrun windSpeed Databases configured in weewx.conf: archive_sqlite: database_name weewx.sdb driver weedb.sqlite SQLITE_ROOT /var/lib/weewx archive_mysql: database_name weewx driver weedb.mysql host localhost user weewx password weewx --- Start configuration file /etc/weewx/weewx.conf --- WEEWX CONFIGURATION FILE Copyright (c) 2009-2024 Tom Keffer [email protected] See the file LICENSE.txt for your rights. ############################################################################## This section is for general configuration information. Set to 1 for extra debug info, otherwise comment it out or set to zero. debug = 1 Whether to log successful operations. May get overridden below. log_success = True Whether to log unsuccessful operations. May get overridden below. log_failure = True This configuration file was created by ... version = 5.1.0 config_path = /etc/weewx/weewx.conf WEEWX_ROOT = /etc/weewx ############################################################################## This section is for information about the station. [Station] # Description of the station location, such as your town. location = "Burgerbrug, NH" # Latitude in decimal degrees. Negative for southern hemisphere. latitude = 52.755603 # Longitude in decimal degrees. Negative for western hemisphere. longitude = 4.6754483 # Altitude of the station, with the unit it is in. This is used only # if the hardware cannot supply a value. altitude = 0, meter # Choose 'foot' or 'meter' for unit # Set to type of station hardware. There must be a corresponding stanza # in this file, which includes a value for the 'driver' option. station_type = BYOWS # If you have a website, you may specify an URL. The URL is required if you # intend to register your station. The URL must include the scheme, for # example, "http://"; or "https://"; station_url = XXXXXX # The start of the rain year (1=January; 10=October, etc.). This is # downloaded from the station if the hardware supports it. rain_year_start = 1 # Start of week (0=Monday, 6=Sunday) week_start = 6 ############################################################################## [Simulator] # This section is for the weewx weather station simulator. # The time (in seconds) between LOOP packets. loop_interval = 2.5 # The simulator mode can be either 'simulator' or 'generator'. # Real-time simulator. Sleep between each LOOP packet. mode = simulator # Generator. Emit LOOP packets as fast as possible (useful for testing). #mode = generator # The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the # default is to use the present time. #start = 2011-01-01T00:00 # The driver to use. driver = weewx.drivers.simulator ############################################################################## This section is for uploading data to Internet sites [StdRESTful] # Uncomment and change to override logging for uploading services. # log_success = True # log_failure = True [[StationRegistry]] # To register this weather station at weewx.com, set this to true, and # set option 'station_url', located in the [Station] section above. register_this_station = False [[AWEKAS]] # This section is for configuring posts to AWEKAS. # If you wish to post to AWEKAS, set the option 'enable' to true, then # specify a username and password. # Use quotes around the password to guard against parsing errors. enable = false username = XXXXXX password = XXXXXX [[CWOP]] # This section is for configuring posts to CWOP. # If you wish to post to CWOP, set the option 'enable' to true, # then specify the station ID (e.g., CW1234). enable = false station = XXXXXX # If this is an APRS (radio amateur) station, specify the # passcode (e.g., 12345). Otherwise, ignore. passcode = XXXXXX [[PWSweather]] # This section is for configuring posts to PWSweather.com. # If you wish to post to PWSweather.com, set the option 'enable' to # true, then specify a station and password. # Use quotes around the password to guard against parsing errors. enable = false station = XXXXXX password = XXXXXX [[WOW]] # This section is for configuring posts to WOW. # If you wish to post to WOW, set the option 'enable' to true, then # specify a station and password. # Use quotes around the password to guard against parsing errors. enable = false station = XXXXXX password = XXXXXX [[Wunderground]] # This section is for configuring posts to the Weather Underground. # If you wish to post to the Weather Underground, set the option # 'enable' to true, then specify a station (e.g., 'KORHOODR3'). Use # the station key (find it at # https://www.wunderground.com/member/devices) for the password. enable = false station = XXXXXX password = XXXXXX # Set the following to True to have weewx use the WU "Rapidfire" # protocol. Not all hardware can support it. See the User's Guide. rapidfire = False ############################################################################## This section specifies what reports, using which skins, to generate. [StdReport] # Where the skins reside, relative to WEEWX_ROOT SKIN_ROOT = skins # Where the generated reports should go, relative to WEEWX_ROOT HTML_ROOT = /var/www/html/weewx # Uncomment and change to override logging for reports. # log_success = True # log_failure = True # The database binding indicates which data should be used in reports. data_binding = wx_binding # Each of the following subsections defines a report that will be run. # See the customizing guide to change the units, plot types and line # colors, modify the fonts, display additional sensor data, and other # customizations. Many of those changes can be made here by overriding # parameters, or by modifying templates within the skin itself. [[SeasonsReport]] # The SeasonsReport uses the 'Seasons' skin, which contains the # images, templates and plots for the report. skin = Seasons enable = true [[SmartphoneReport]] # The SmartphoneReport uses the 'Smartphone' skin, and the images and # files are placed in a dedicated subdirectory. skin = Smartphone enable = false HTML_ROOT = /var/www/html/weewx/smartphone [[MobileReport]] # The MobileReport uses the 'Mobile' skin, and the images and files # are placed in a dedicated subdirectory. skin = Mobile enable = false HTML_ROOT = /var/www/html/weewx/mobile [[StandardReport]] # This is the old "Standard" skin. By default, it is not enabled. skin = Standard enable = false [[FTP]] # FTP'ing the results to a webserver is treated as just another report, # albeit one with an unusual report generator! skin = Ftp # If you wish to use FTP, set "enable" to "true", then fill out the # next four lines. # Use quotes around the password to guard against parsing errors. enable = true user = XXXXXX password = XXXXXX server = XXXXXX # The ftp server name, e.g, www.myserver.org path = /weerindedraai.nl/www/borst # The destination directory, e.g., /weather # Set to True for an FTP over TLS (FTPS) connection. Not all servers # support this. secure_ftp = False # To upload files from something other than what HTML_ROOT is set # to above, specify a different HTML_ROOT here. #HTML_ROOT = /var/www/html/weewx # Most FTP servers use port 21. port = 21 # Set to 1 to use passive mode, zero for active mode passive = 1 [[RSYNC]] # rsync'ing to a webserver is treated as just another report. skin = Rsync # If you wish to use rsync, you must configure passwordless ssh using # public/private key authentication from the user account that weewx # runs to the user account on the remote machine where the files # will be copied. # # If you wish to use rsync, set "enable" to "true", then # fill out server, user, and path. # The server should appear in your .ssh/config file. # The user is the username used in the identity file. # The path is the destination directory, such as /var/www/html/weather. # Be sure that the user has write permissions on the destination! enable = false server = XXXXXX user = XXXXXX path = replace_me # To upload files from something other than what HTML_ROOT is set # to above, specify a different HTML_ROOT here. #HTML_ROOT = /var/www/html/weewx # Rsync can be configured to remove files from the remote server if # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you # make a mistake in the remote path, you could could unintentionally # cause unrelated files to be deleted. Set to 1 to enable remote file # deletion, zero to allow files to accumulate remotely. delete = 0 # Options in the [[Defaults]] section below will apply to all reports. # What follows are a few of the more popular options you may want to # uncomment, then change. [[Defaults]] # Which language to use for all reports. Not all skins support all # languages. You can override this for individual reports. lang = en # Which unit system to use for all reports. Choices are 'us', 'metric', # or 'metricwx'. You can override this for individual reports. unit_system = us [[[Units]]] # Option "unit_system" above sets the general unit system, but # overriding specific unit groups is possible. These are popular # choices. Uncomment and set as appropriate. The unit is always # in the singular, e.g., 'mile_per_hour', NOT 'miles_per_hour' [[[[Groups]]]] # group_altitude = meter # Options are 'foot' or 'meter' # group_pressure = mbar # Options are 'inHg', 'mmHg', 'mbar', or 'hPa' # group_rain = mm # Options are 'inch', 'cm', or 'mm' # group_rainrate = mm_per_hour # Options are 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour' # group_temperature = degree_C # Options are 'degree_C', 'degree_F', or 'degree_K' # The following line is used to keep the above lines indented # properly. It can be ignored. unused = unused # Uncommenting the following section frequently results in more # attractive formatting of times and dates, but may not work in # your locale. [[[[TimeFormats]]]] # day = %H:%M # week = %H:%M on %A # month = %d-%b-%Y %H:%M # year = %d-%b-%Y %H:%M # rainyear = %d-%b-%Y %H:%M # current = %d-%b-%Y %H:%M # ephem_day = %H:%M # ephem_year = %d-%b-%Y %H:%M # The following line is used to keep the above lines indented # properly. It can be ignored. unused = unused [[[Labels]]] # Users frequently change the labels for these observation types. [[[[Generic]]]] # inHumidity = Inside Humidity # inTemp = Inside Temperature # outHumidity = Outside Humidity # outTemp = Outside Temperature # extraTemp1 = Temperature1 # extraTemp2 = Temperature2 # extraTemp3 = Temperature3 # The following line is used to keep the above lines indented # properly. It can be ignored. unused = unused ############################################################################## This service converts the unit system coming from the hardware to a unit system in the database. [StdConvert] # The target_unit affects only the unit system in the database. Once # chosen it cannot be changed without converting the entire database. # Modification of target_unit after starting weewx will result in # corrupt data - the database will contain a mix of US and METRIC data. # # The value of target_unit does not affect the unit system for # reporting - reports can display US, Metric, or any combination of units. # # In most cases, target_unit should be left as the default: US # # In particular, those migrating from a standard wview installation # should use US since that is what the wview database contains. # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! target_unit = US # Options are 'US', 'METRICWX', or 'METRIC' ############################################################################## This section can adjust data using calibration expressions. [StdCalibrate] [[Corrections]] # For each type, an arbitrary calibration expression can be given. # It should be in the units defined in the StdConvert section. # Example: foo = foo + 0.2 ############################################################################## This section is for quality control checks. If units are not specified, values must be in the units defined in the StdConvert section. [StdQC] [[MinMax]] barometer = 26, 32.5, inHg pressure = 24, 34.5, inHg outTemp = -40, 120, degree_F inTemp = 10, 120, degree_F outHumidity = 0, 100 inHumidity = 0, 100 windSpeed = 0, 120, mile_per_hour rain = 0, 10, inch ############################################################################## This section controls the origin of derived values. [StdWXCalculate] [[Calculations]] # How to calculate derived quantities. Possible values are: # hardware - use the value provided by hardware # software - use the value calculated by weewx # prefer_hardware - use value provide by hardware if available, # otherwise use value calculated by weewx pressure = prefer_hardware altimeter = prefer_hardware appTemp = prefer_hardware barometer = prefer_hardware cloudbase = prefer_hardware dewpoint = prefer_hardware ET = prefer_hardware heatindex = prefer_hardware humidex = prefer_hardware inDewpoint = prefer_hardware maxSolarRad = prefer_hardware rainRate = prefer_hardware windchill = prefer_hardware windrun = prefer_hardware ############################################################################## For hardware that supports it, this section controls how often the onboard clock gets updated. [StdTimeSynch] # How often to check the weather station clock for drift (in seconds) clock_check = 14400 # How much it can drift before we will correct it (in seconds) max_drift = 5 ############################################################################## This section is for configuring the archive service. [StdArchive] # If the station hardware supports data logging then the archive interval # will be downloaded from the station. Otherwise, specify it (in seconds). archive_interval = 300 # If possible, new archive records are downloaded from the station # hardware. If the hardware does not support this, then new archive # records will be generated in software. # Set the following to "software" to force software record generation. record_generation = hardware # Whether to include LOOP data in hi/low statistics. loop_hilo = True # Uncomment and change to override logging for archive operations. # log_success = True # log_failure = True # The data binding used to save archive records. data_binding = wx_binding ############################################################################## This section binds a data store to a database. [DataBindings] [[wx_binding]] # The database must match one of the sections in [Databases]. # This is likely to be the only option you would want to change. database = archive_sqlite # The name of the table within the database. table_name = archive # The manager handles aggregation of data for historical summaries. manager = weewx.manager.DaySummaryManager # The schema defines the structure of the database. # It is *only* used when the database is created. schema = schemas.wview_extended.schema ############################################################################## This section defines various databases. [Databases] # A SQLite database is simply a single file. [[archive_sqlite]] database_name = weewx.sdb database_type = SQLite # MySQL [[archive_mysql]] database_name = weewx database_type = MySQL ############################################################################## This section defines defaults for the different types of databases. [DatabaseTypes] # Defaults for SQLite databases. [[SQLite]] driver = weedb.sqlite # Directory in which database files are located, relative to WEEWX_ROOT SQLITE_ROOT = /var/lib/weewx # Defaults for MySQL databases. [[MySQL]] driver = weedb.mysql # The host where the database is located. host = localhost # The user name for logging in to the host. user = XXXXXX # Use quotes around the password to guard against parsing errors. password = XXXXXX ############################################################################## This section configures the internal weewx engine. [Engine] # This section specifies which services should be run and in what order. [[Services]] prep_services = weewx.engine.StdTimeSynch data_services = , process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate xtype_services = weewx.wxxtypes.StdWXXTypes, weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater, weewx.wxxtypes.StdDelta archive_services = weewx.engine.StdArchive restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS report_services = weewx.engine.StdPrint, weewx.engine.StdReport [BYOWS] # This section is for the Raspberry Pi Bring Your Own Weather Station driver. # [REQUIRED] # The driver to use. driver = user.byows_rpi # [OPTIONAL] # How often should the driver generate packets in seconds loop_interval = 2.5 # [OPTIONAL] # Pin to which anemometer is connected, the DEFAULT is pin 5. anemometer_pin = 5 # [OPTIONAL] # Pin to which rain bucket is connected, the DEFAULT is pin 6. rain_bucket_pin = 6 # [OPTIONAL] # Port and address for sensor bme280, the DEFAULT are port=1 address=0x77 bme280_port = 1 bme280_address = 0x76 # [OPTIONAL] # Channel to which wind vane is connected to on MCP3008, The DEFAULT is channel 0 mcp3008_channel = 0 # [OPTIONAL] # Anemometer adjustment value, the DEFAULT is 1.18 anemometer_adjustment = 1.18 # [OPTIONAL] # Bucket Size in mm, the DEFAULT is 0.2794 mm. bucket_size = 0.2794 # [OPTIONAL] # Anemometer radious in cm, the DEFAULT is 9.0 cm. anemometer_radius_cm = 9.0 -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/2d0b4d46-1bbb-45d4-a1a4-db789087c9e0n%40googlegroups.com.
