Hi Glenn, Yes, that’s where the extensions are and where you helped me set them up. Thank you for remembering for me as I fear old age is is taking its toll here… All is good as I see why it was working in 4.10.2. Problem solved! My apologies to all for the unnecessary questions which had already been answered by Glenn. Thanks Tom and Vince for your suggestions. Cheers, Bob
On Wednesday, July 10, 2024 at 9:25:55 PM UTC-4 Glenn McKechnie wrote: > Just to recap on what has been said already. Are you certain that the > bin/user/extensions.py file in your 4.10.2 installation doesn't have the > required additions in it already? > > That's where I thought you had put them. > > Cheers > Glenn > > Various WeeWx addons at > https://github.com/glennmckechnie > > > On Thu, 11 Jul 2024 at 04:50, [email protected] <[email protected]> wrote: > >> Tom, >> I have attempted to construct a file user/geiger.py from the customizing >> groups/units directions. I haven't tried it yet because I wanted you to see >> if I am on the right track here. I'm not sure of the syntax necessary. The >> class statement looks odd as if somethig should come after the ":" >> class Addgeigerdose(StdService): >> class Addgeigercpm(StdService): >> Anyway, please comment when you have time. Thanks. >> Bob >> >> ### geiger.py >> ########################### >> import weewx >> from weewx.engine import StdService >> import weewx.units >> >> weewx.units.obs_group_dict['geigerdose'] = 'group_severt' >> weewx.units.obs_group_dict['geigercpm'] = 'group_cpm' >> >> class Addgeigerdose(StdService): >> class Addgeigercpm(StdService): >> >> weewx.units.USUnits['group_severt'] = 'µSv' >> weewx.units.MetricUnits['group_severt'] = 'µSv' >> weewx.units.MetricWXUnits['group_severt'] = 'µSv' >> >> weewx.units.USUnits['group_cpm'] = 'cpm' >> weewx.units.MetricUnits['group_cpm'] = 'cpm' >> weewx.units.MetricWXUnits['group_cpm'] = 'cpm' >> >> weewx.units.default_unit_format_dict['µSv'] = '%.1f' >> weewx.units.default_unit_label_dict['µSv'] = ' µSv' >> >> weewx.units.default_unit_format_dict['cpm'] = '%.0f' >> weewx.units.default_unit_label_dict['cpm'] = ' cpm' >> >> >> On Wednesday, July 10, 2024 at 11:37:44 AM UTC-4 [email protected] wrote: >> >>> Thanks for the replies. Sorry for the confusing question which is >>> probably because I'm confused about why things aren't working. >>> To narrow this down, I have a Geiger counter sending data to weewx which >>> is being stored in weewx.sdb under signal1 and signal2. This seems to be >>> working. >>> I have added the following to weewx.conf (Standard skin) under units, >>> groups and string format (see original message above). >>> >>> signal1 = cpm group_cpm = cpm cpm = %.0f >>> signal2 = µSv group_severt = µSv µSv = %.2f >>> >>> I have this in my weewx.conf for 4.10.2 where it's working but does not >>> work in 5.1 when pasted into weewx.conf. In 4.10.2, I have not used any >>> extra code for an extension. I'm not sure of how to format something like >>> 'geiger.py' for weewx 5.1 but maybe that is what I need to do. Vince >>> pointed me to a cheetah-generator formatting section which I had not seen >>> before so maybe I could use something like this in my index.html.tmpl (?). >>> >>> I have restored the original units.py. That modification was just an >>> uneducated guess on my part. >>> >>> What I have in 5.1 is working. It would just look better if it displayed >>> the units and format better. >>> >>> CO2 level 458 ppm at 11:00 [this one works >>> correctly] >>> Radiation Count Level 16.857143 at 11:15 >>> Radiation Dose 0.095714 at 11:15 >>> >>> Thanks for your help. >>> Cheers, >>> Bob >>> On Tuesday, July 9, 2024 at 11:59:53 PM UTC-4 vince wrote: >>> >>>> I would again suggest you use your working v4 system as a reference and >>>> do the same edits to your new v5 system. >>>> >>>> Nothing has changed related to formatting your data in the cheetah >>>> .tmpl templates. See >>>> >>>> https://weewx.com/docs/5.1/custom/cheetah-generator/?h=forma#formatting-examples >>>> >>>> for some hopefully obvious examples. >>>> >>>> On Tuesday, July 9, 2024 at 9:12:26 AM UTC-6 [email protected] wrote: >>>> >>>>> Sorry to keep going on this but I have no takers so far. >>>>> >>>>> I have added this to weewx.conf: >>>>> [[StandardReport]] >>>>> # This is the old "Standard" skin. By default, it is not >>>>> enabled. >>>>> skin = Standard >>>>> enable = true >>>>> >>>>> [[[Units]]] >>>>> [[[[Groups]]]] >>>>> group_fraction = ppm #added for CO2 >>>>> monitor 11/30/21 >>>>> group_severt = µSv >>>>> group_conductivity = dSm >>>>> group_cpm = cpm >>>>> [[[[StringFormats]]]] >>>>> ppm = %.0f # 12/2/21 >>>>> cpm = %.0f >>>>> µSv = %.2f >>>>> dSm = %.2f >>>>> >>>>> and this to units.py: >>>>> >>>>> obs_group_dict = ListOfDicts({ >>>>> "signal1" : "group_cpm", >>>>> "signal2" : "group_severt", >>>>> >>>>> USUnits = ListOfDicts({ >>>>> "group_severt" : "µSv", >>>>> >>>>> As mentioned earlier, this is working fine in 4.10.2 but I just can't >>>>> get going in 5.1 (pip install). Everything else seems to be working well. >>>>> Any help would be greatly appreciated. >>>>> Cheers, >>>>> Bob >>>>> grattans.org/wx >>>>> >>>>> On Thursday, July 4, 2024 at 3:06:51 PM UTC-4 [email protected] wrote: >>>>> >>>>>> Hello all, >>>>>> I am slowly moving my weewx 4.10.2 ubuntu VP2+ station to an RPI5 >>>>>> with Bookworm. Lacking in indepth knowledge of html and python, I'm >>>>>> having >>>>>> lots of trouble with formats and units. I had it working on the Standard >>>>>> skin (see attache file) but many things have changed on how this is now >>>>>> done. Before I was adding to weewx.conf but it appears more complicated >>>>>> for >>>>>> 5.0. >>>>>> The file shows my present Standard page and then the attempted >>>>>> version in 5.0. I'm not sure how to add the "µ" symbol or to round data >>>>>> with too many decimal places. >>>>>> What I have in 5.0 seems to be running but doesn't look very nice. >>>>>> Could someone please point me in the correct direction? I have looked >>>>>> at the customization section of the wiki but am not sure how to proceed. >>>>>> The Geiger counter data is stored in Signal1 and Signal2 of weewx.sdb. >>>>>> >>>>>> MQTT section from weewx.conf >>>>>> ################## >>>>>> ## Radmon+ Geiger counter from emonpi >>>>>> ################## >>>>>> >>>>>> [[[gccpm]]] >>>>>> name = signal1 >>>>>> [[[[message]]]] >>>>>> type = individual >>>>>> [[[gcdose]]] >>>>>> name = signal2 >>>>>> [[[[message]]]] >>>>>> type = individual >>>>>> #################################### >>>>>> ## Soil Moisture / Soil Temp from emoncms >>>>>> #################################### >>>>>> [[[4103]]] >>>>>> name = soilMoist1 >>>>>> [[[[message]]]] >>>>>> type = individual >>>>>> [[[4102]]] >>>>>> name = soilTemp3 >>>>>> [[[[message]]]] >>>>>> type = individual >>>>>> [[[4108]]] >>>>>> name = signal3 >>>>>> [[[[message]]]] >>>>>> type = individual >>>>>> >>>>>> Thanks in advance. Everything is rtunning with no errors so far. >>>>>> Bob >>>>>> http://grattans.org/wx >>>>>> >>>>>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/5bcb58da-6b8e-4ad9-966b-419d57ea9e66n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/5bcb58da-6b8e-4ad9-966b-419d57ea9e66n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/29c4194c-90ef-4d28-8245-29b8bfe74e96n%40googlegroups.com.
