This is the log from last night from before and after the time it shuts down each week and does not restart unless the Rpi is rebooted.
On Thursday 29 August 2024 at 09:30:46 UTC+12 Monica Mulholland wrote: > Thank you! > > > On Thursday 29 August 2024 at 09:16:41 UTC+12 gjr80 wrote: > >> I have no idea what might be causing your nightly stoppage, but from the >> most recent log posted you almost certainly have corrupt station memory. >> The clues are in hardware record generation being used, WeeWX talking to >> the console/logger but no archive records being dowloaded and reports are >> generated normally but with no new data. The net effect is that WeeWX can >> obtain loop packet data from the console but it cannot obtain archive >> records. You might want to work through the Corrupt station memory >> <https://github.com/weewx/weewx/wiki/Troubleshooting-the-Davis-Vantage-station#corrupt-station-memory> >> >> section of the Troubleshooting the Davis Vantage station wiki page >> <https://github.com/weewx/weewx/wiki/Troubleshooting-the-Davis-Vantage-station> >> . >> >> As for the nightly stoppage, once you get your station working again you >> might want to leave debug = 1 and post a log extract covering say 30 >> minutes either side of the stoppage time. >> >> Gary >> >> On Thursday 29 August 2024 at 06:53:02 UTC+10 [email protected] wrote: >> >>> But, it is not running at all at the moment.....it is not showing on the >>> website. On Wunderground it says offline. Despite repeated reboots, it has >>> not run in nearly a week. >>> >>> On Thursday 29 August 2024 at 05:57:50 UTC+12 vince wrote: >>> >>>> Let it run through the weekend and if it fails again this Saturday post >>>> whatever is logged please. >>>> >>>> On Wednesday, August 28, 2024 at 12:55:24 AM UTC-7 dunbrokin wrote: >>>> >>>>> OK, lets see if I can get it right this time! >>>>> mylog >>>>> <https://drive.google.com/file/d/11Ho3ZSODZgTH-WZ39Ak_JBqNh9YaTSMZ/view?usp=drive_web> >>>>> >>>>> On Tue, Aug 27, 2024 at 2:15 PM vince <[email protected]> wrote: >>>>> >>>>>> Set debug=1 and maybe we can figure it out >>>>>> >>>>>> On Monday, August 26, 2024 at 1:02:43 PM UTC-7 dunbrokin wrote: >>>>>> >>>>>>> Oops Sorry, I thought I had hardwired in debug=1.....bottom of the >>>>>>> class for me on this one I think....made all the rookie mistakes. >>>>>>> Apologies >>>>>>> for wasting your time! >>>>>>> >>>>>>> >>>>>>> On Tue, Aug 27, 2024 at 4:20 AM vince <[email protected]> wrote: >>>>>>> >>>>>>>> Sigh - as always, set debug=1 and let it run for more like 35 >>>>>>>> minutes. You have an archive period of 10 minutes if it's running off >>>>>>>> the >>>>>>>> hardware interval of 600 seconds so we need to see a few cycles. >>>>>>>> >>>>>>>> On Monday, August 26, 2024 at 1:38:03 AM UTC-7 dunbrokin wrote: >>>>>>>> >>>>>>>>> Apologies, yes it's always a good idea. >>>>>>>>> >>>>>>>>> For the last 3 weeks on Sat night at 11.50 it stopped >>>>>>>>> recording.....but rebooting started it again the next day. However >>>>>>>>> this >>>>>>>>> week after rebooting it stopped at 11.10 am and despite rebooting, it >>>>>>>>> never >>>>>>>>> started recording again. >>>>>>>>> >>>>>>>>> So I ran the log as per the instructions....but it only ran for >>>>>>>>> about 6 minutes. Attached is all that was recorded in almost 15 >>>>>>>>> minutes. >>>>>>>>> >>>>>>>>> >>>>>>>>> On Sun, Aug 25, 2024 at 1:33 PM vince <[email protected]> wrote: >>>>>>>>> >>>>>>>>>> Your system logs. >>>>>>>>>> >>>>>>>>>> On Saturday, August 24, 2024 at 4:16:58 PM UTC-7 Monica >>>>>>>>>> Mulholland wrote: >>>>>>>>>> >>>>>>>>>>> Every week, on Saturday night at 11.50 pm my station stops >>>>>>>>>>> reporting and needs to be rebooted. I am on a RPi4 (recently >>>>>>>>>>> upgraded). >>>>>>>>>>> Other than this little glitch, which is annoying, it is running >>>>>>>>>>> very well >>>>>>>>>>> since I upgraded to the RPi4. >>>>>>>>>>> >>>>>>>>>>> Any suggestions of where I might look to try and sort this issue? >>>>>>>>>>> >>>>>>>>>>> Any help greatly appreciated. >>>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send an email to [email protected]. >>>>>>>>>> To view this discussion on the web visit >>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/68cf6bec-901e-449d-b75a-45b3fc7c75b5n%40googlegroups.com >>>>>>>>>> >>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/68cf6bec-901e-449d-b75a-45b3fc7c75b5n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>> . >>>>>>>>>> >>>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "weewx-user" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>> send an email to [email protected]. >>>>>>>> >>>>>>> To view this discussion on the web visit >>>>>>>> https://groups.google.com/d/msgid/weewx-user/79829310-aa83-4281-9244-7cc9adbc0037n%40googlegroups.com >>>>>>>> >>>>>>>> <https://groups.google.com/d/msgid/weewx-user/79829310-aa83-4281-9244-7cc9adbc0037n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>> . >>>>>>>> >>>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "weewx-user" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to [email protected]. >>>>>> >>>>> To view this discussion on the web visit >>>>>> https://groups.google.com/d/msgid/weewx-user/ef35ee91-7527-4e17-93a4-f3f7d5bf91c8n%40googlegroups.com >>>>>> >>>>>> <https://groups.google.com/d/msgid/weewx-user/ef35ee91-7527-4e17-93a4-f3f7d5bf91c8n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>> . >>>>>> >>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/a90e0cb4-8728-443c-a04c-bd4f21cee9f1n%40googlegroups.com.
mylog(3)
Description: Binary data
