My Weewx (5.1) run on a Rpi400 (a RPi4 in the keyboard with 4 GB of memory) 
for a little more than 3 Years, without any glitch. The loop interval is 
300 s, the dB server is mariadb/mysql on the Rpi. In addition and in 
parallel, I run 4 heavy batch programs (BOINC), so that the RPi is always 
(very) busy. The mean temperature of the cpu is ~60 centigrad, around 160 
F. This is a lot but is very stable over time, avoiding thermal shocks. The 
SSD (129 GB) is hot too. It is 65 % full. No UPS (but we are in Switzerland 
with almost no power interruption). 

The archive is 128 MB for 600 K records. It is backuped every day on two 
other server, not RPi... Further more, the data from the Tenpest weather 
station are also recorded on an other computer.

>From experience, I  found one major difference between various SSD, that is 
their power consumption. The one in use is a low consumer one.

This system was build to stretch the RPi, may be overstretch, but until 
now, it runs perfectly. 

Hope this helps other !       regards,     Paul



Le Sunday, September 1, 2024 à 9:23:51 PM UTC+2, Tom Keffer a écrit :

> Almost 10 years ago I started an experiment on how long an SD card can 
> last in the WeeWX environment. You can see the environment here 
> <https://www.threefools.org/weewx/status/index.html>.
>
> When the experiment started, Squeeze (Debian 6) on an RPi B+ was state of 
> the art. We've now gone on through 4 new generations of Pi's, and 6 
> generations of Debian.
>
> I'm finally bringing the experiment to a halt today, just short of its 
> 10th anniversary,  not because the card failed, but because the version of 
> ssh it uses is so obsolete that my cloud server refuses to accept a 
> connection any longer.
>
> I could install the latest version of Raspberry Pi OS, but I'd like that 
> corner of my desk back.
>
> Conclusion? There is no reason not use an SD card as your primary storage 
> if you do the following:
>
>    - Get a good one. I used a SanDisk Extreme Plus, which is still 
>    available.
>    - Buy a big one so the wear-leveling algorithm has lots of space to 
>    work with.
>    - Use a UPS (Uninterruptible Power Supply). This cuts down on 
>    electrical transients.
>    - Run a backup!
>
> -tk
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/c2a30b08-f210-4188-89a8-57a94a002075n%40googlegroups.com.

Reply via email to