You need to uncomment the line. When done, it should read:
[[[Units]]]
# Option "unit_system" above sets the general unit system, but
# overriding specific unit groups is possible. These are popular
# choices. Uncomment and set as appropriate. The unit is always
# in the singular, e.g., 'mile_per_hour', NOT 'miles_per_hour'
[[[[Groups]]]]
# group_altitude = meter # Options are 'foot'
or 'meter'
# group_pressure = mbar # Options are
'inHg', 'mmHg', 'mbar', or 'hPa'
group_rain = mm # Options are 'inch',
'cm', or 'mm'
# group_rainrate = mm_per_hour # Options are
'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
# group_temperature = degree_C # Options are
'degree_C', 'degree_F', or 'degree_K'
# The following line is used to keep the above lines indented
# properly. It can be ignored.
unused = unused
On Wed, Sep 4, 2024 at 11:28 PM Monica Mulholland <[email protected]>
wrote:
> The rain graph (and associated text) show cm and cm/hr for my rain
> gauge....but in my weewx.conf I have stipulated mm for the rain output. See
> attached from wwex.conf. What am I missing?
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/ce4cfa13-41e9-4fce-a014-8a8824fdc25bn%40googlegroups.com
> <https://groups.google.com/d/msgid/weewx-user/ce4cfa13-41e9-4fce-a014-8a8824fdc25bn%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/CAPq0zECTufXR1PsdQJiyyfDWo5uOr0gFyQC%3D1W1yCdyX5EheLw%40mail.gmail.com.
