Hi Thanks for the reply. I was messing with WeeWM a few months ago with exactly the same hardware/software setup and lightning reporting worked out of the box with the sensor map as per my post.
This time it is not doing On Wednesday 2 October 2024 at 15:42:01 UTC+1 [email protected] wrote: > In general, you have to configure the skin of your choice to display > lightning events. But, displaying lightning strikes are is a bit different > from other observations, since they are discrete events and not continuous. > You can e.g. show count per interval, distance, or both combined. Either > way, you need to configure your skin as desired, since the skins I know of, > don't display these observations out of the box. > > John Jacklin schrieb am Mittwoch, 2. Oktober 2024 um 14:39:48 UTC+2: > >> Just got back into WeeWX again after freeing up a Raspberry Pi. >> I have the Tempest WeatherFlow device and using the river from here >> >> https://github.com/captain-coredump/weatherflow-udp?tab=readme-ov-file >> >> I have it set up and tweaked to my liking here >> >> https://wx-watch.co.uk/weewx/ >> >> For the life of me I can't get it to show lightning strikes (It is set up >> to show strikes on the app) >> >> Here are my settings (with MY-ID being my station ST ID) >> >> [WeatherFlowUDP] >> >> driver = user.weatherflowudp >> log_raw_packets = False >> udp_address = <broadcast> >> # udp_address = 0.0.0.0 >> # udp_address = 255.255.255.255 >> udp_port = 50222 >> udp_timeout = 90 >> share_socket = False >> >> # >> # IMPORTANT - please edit in 'your' sensor ID below >> # (the value 'ST-00000025' here is an example only) >> # >> >> [[sensor_map]] >> outTemp = air_temperature.ST-MY-ID.obs_st >> outHumidity = relative_humidity.ST-MY-ID.obs_st >> pressure = station_pressure.ST-MY-ID.obs_st >> lightning_strikes = lightning_strike_count.ST-MY-ID.obs_st >> avg_distance = lightning_strike_avg_distance.ST-MY-ID.obs_st >> outTempBatteryStatus = battery.ST-MY-ID.obs_st >> windSpeed = wind_speed.ST-MY-ID.rapid_wind >> windDir = wind_direction.ST-MY-ID.rapid_wind >> luxXXX = illuminance.ST-MY-ID.obs_st >> UV = uv.ST-MY-ID.obs_st >> rain = rain_accumulated.ST-MY-ID.obs_st >> windBatteryStatus = battery.ST-MY-ID.obs_st >> radiation = solar_radiation.ST-MY-ID.obs_st >> rxCheckPercent = rssi.ST-MY-ID.device_status >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/67606f55-596d-4d6c-92fe-f73a0b47d754n%40googlegroups.com.
