Is there even a weewx driver for that station? If not, you're out of luck until there is one. If the WS3 uses the same protocol as the WS1, use the old driver.
neilobao10 schrieb am Donnerstag, 12. Dezember 2024 um 10:46:16 UTC+1: > [image: WhatsApp Image 2024-12-11 at 13.32.25.jpeg]Good afternoon > everyone! I live in Salvador, Bahia, Brazil! I would like to receive help > from this group. I have a weather station with the following setup: Orange > pi3 LTS, Weewx 5.01, RS232 cable and WS1 ADS! All was well until WS1 > presented a problem. So I decided to buy through Allexpress, another WS3 > weather station, TTL output and a TTL/USB adapter. I can access through the > Terminal, the data of the aforementioned WS3 station without errors at 2400 > bau. However, Weewx does not communicate with it, even though it changes > the settings for the new WS3 station. As far as I know, Weewx, can't find > this WS3 driver! I've searched the net but I haven't found this software. > As I don't have much knowledge in this regard, I ask the group for help > and if anyone has already gone through this problem and managed to solve > it, explain how they solved it. > I made two prints that maybe, come to exemplify what must be happening! > Grateful! -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/3b61c910-de37-4f0b-b015-9c6e9d235fban%40googlegroups.com.
