Yes it is. I have a station with two Anemometers and I mix them in the way,
that always the higher windSpeed/windGust will be used, if both are there,
or the one that's there. Anemometers freeze or sometime I have Signal
strength issues. I always take the direction of a specific one (an
ultrasonic with heating, that won't freeze), except it isn't there. It's
quite a brainf*ck, but it works. Some other Corrections are also done:
[StdCalibrate]
[[Corrections]]
radiation = luminosity/126.7 if luminosity is not None else None
#gw1000 fix
lightning_distance = lightning_distance if lightning_strike_count >
0 else None
windSpeed = ws90_windSpeed if 'windSpeed' not in locals() else
windSpeed if 'ws90_windSpeed' not in locals() else ws90_windSpeed if
ws90_windSpeed > windSpeed else windSpeed
windGust = ws90_windGust if 'windGust' not in locals() else
windGust if 'ws90_windGust' not in locals() else ws90_windGust if
ws90_windGust > windGust else windGust
windDir = ws90_windDir if 'ws90_windDir' in locals() and
ws90_windDir is not None else windDir
Rory Gillies schrieb am Mittwoch, 15. Januar 2025 um 17:53:42 UTC+1:
> I know I could just try this but interested to hear if it would work, or
> if I have any other options. WeeWX 5.1.
>
> Is it possible to use logic in StdCalibrate in weewx.con? Something like
> this:
>
> [StdCalibrate]
> if windSpeed == 0 windspeed = windspeed + 15
> if windDir == NULL windDir = windDir + 235
>
> The reason is I have a dying anemometer and it's going to take a couple of
> weeks to get a replacement installed (it's on my chimney 8m above the
> ground). When the wind blows from SSW to WSW above 20mph it sometimes drops
> to zero every few loop packets (other times it is perfect).
>
> [image: Screenshot 2025-01-15 at 16.49.12.png]
>
> I know the observations will be technically incorrect but better than no
> wind at all!
>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion visit
https://groups.google.com/d/msgid/weewx-user/45142735-cd48-4909-81d9-e974fa166bfcn%40googlegroups.com.
