Yes, 433MHz here. I have a WH40 on the way, what's another rain gauge... Gary
On Friday, 31 January 2025 at 03:14:25 UTC+10 [email protected] wrote: > I just ordered a GW3000, but it won't ship before March. > > [email protected] schrieb am Dienstag, 28. Januar 2025 um 07:10:54 > UTC+1: > >> >> I have a spare WH40 for 868MHz, but you are not in Europe, are you? Too >> bad the GW3000 868MHz is sold out currently, I won't get one before end of >> February, I assume. >> gjr80 schrieb am Montag, 27. Januar 2025 um 21:08:47 UTC+1: >> >>> I have the GW3000 and WS90 so have the haptic sensor covered, and I can >>> surmise the behaviour with a WH40 only, it is just a case of confirming >>> what happens when both WS90 (or WS85) and WH40 are present. Thanks for the >>> offer, but if I don't get any data responses here I will likely just buy a >>> WH40 and wait for the couple of weeks for delivery. >>> >>> All going well I hope to have the new driver with backfill ready for >>> user testing sometime in 2nd half of February. >>> >>> Gary >>> >>> On Sunday, 26 January 2025 at 18:06:59 UTC+10 [email protected] wrote: >>> >>>> Hi Gary, all I am missing is the GW3000, since I was waiting for your >>>> updated driver. How about you? If it's the same situation for you, tell me >>>> the shipping address, I'll get you one, as a donation for the project, or, >>>> if you decline, I'll buy one for myself, but it'll take a while until I'll >>>> arrive. >>>> gjr80 schrieb am Sonntag, 26. Januar 2025 um 04:29:17 UTC+1: >>>> >>>>> Posted in weewx-user to canvass a wider audience. >>>>> >>>>> I'm developing a new Ecowitt driver based on the so called local >>>>> device HTTP API. This driver will have catchup on startup via either >>>>> local >>>>> device history files (for supported devices) or Ecowitt.net (for devices >>>>> that upload to Ecwoitt.net). Ecowitt's documentation of the local device >>>>> HTTP API and GW3000 SD card data files is somewhat limited, so I was >>>>> hoping >>>>> for some practical help from an Ecowitt GW3000 user (if one exists) who >>>>> has >>>>> both tipping (WH40) and haptic (WS85/WS90) rain gauges connected to their >>>>> GW3000. >>>>> >>>>> What I am after is the header information from the basic sensor CSV >>>>> file stored on the GW3000 SD card when the GW3000 is connected to both >>>>> WH40 >>>>> and WS85/WS90 rain gauges. The basic sensor CSV file name format is >>>>> YYYYMMX.csv where YYYY is the year, MM is the two digit month number >>>>> and X is an upper case letter. The basic sensor file can be >>>>> downloaded via the local device web page or directly in your browser via >>>>> http://device_ip_address:81/YYYYMMX.csv where device_ip_address is >>>>> the device IP address and YYYYMMX.csv is the file name as described >>>>> previously. You can view the availble SD card history files via the >>>>> device >>>>> web page or at http://device_ip_address/get_sdmmc_info. >>>>> >>>>> The required data does not contain any sensitive info. >>>>> >>>>> thanks, >>>>> Gary >>>>> >>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/90fbca24-5319-41ff-93ce-02272fca68e1n%40googlegroups.com.
