"source ~/weewx-venv/bin/activate" to activate your python virtual environment, then the weectl command will work.
You did a pip installation, so you always need to activate your venv before running weewx commands. On Friday, February 14, 2025 at 2:57:18 PM UTC-8 Artvd wrote: > Thank for your replies. I have found a working driver and got things > working. However when i tried to use "weectl extension" to install the > neoground skin, i got the message that the "command weectl" can not be > found. > I found "weectl" 2x in the home/user section on my Rasberry PI. When i > tried to use those files, i got the message that access is disallowed, also > with sudo. > How can install the skin? > > > > Op vrijdag 14 februari 2025 om 01:07:57 UTC+1 schreef Tom Keffer: > >> Perhaps it was a typo, but did you say you are using WeatherLink Live? >> The WeeWX Vantage driver does not support that. Or, did you mean you have >> the WeatherLink IP, which the driver does support? >> >> It's possible that you are not looking at the same weewx.conf file that >> weewxd is using. The log will tell. >> >> If you're still stuck, set debug=1, restart weewx, then send the log. See >> *How >> to get a useful log report >> <https://github.com/weewx/weewx/wiki/view-logs#how-to-produce-a-useful-log-report>*. >> >> Please do not send a screenshot! >> >> On Thursday, February 13, 2025 at 3:58:28 PM UTC-8 Artvd wrote: >> >>> I attach a copy of the vantage driver section. [image: >>> PXL_20250213_234135905-min.jpg] >>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/affadcc5-584e-45c0-ab53-675eb4ce10d0n%40googlegroups.com.
