OK, so I will try this approach - connecting to Garni's own network, power off and on and tcpdump'ing. I will then give a feedback here. Maybe it will help someone in the future. But I can make such an attempt at next weekend. poniedziałek, 24 marca 2025 o 06:41:41 UTC+1 vince napisał(a):
> The setup procedure you mention is exactly like an ecowitt gateway’s. You > put an ecowitt gateway/console into a setup mode and you can connect to it > from any wifi device to do the setup steps. So that is why it works that > way. It permits setting it up from a laptop or other wifi device > wirelessly without requiring bluetooth (which a weatherflow hub requires, > for example). > > Using a pi zero certainly makes your diagnostics more difficult, I still > recommend starting tcpdump and capturing to a file, power cycling the > garni, and seeing if you can capture its communication. It almost certainly > does a ntp lookup and probably dns queries as well. You might set the garni > dns to 8.8.8.8 and 8.8.4.4 to use google dns (if I recall their addresses > correctly) but that might be on the advanced tab in your setup gui. I > didn’t notice it on the jpeg you linked to. > > > On Sunday, March 23, 2025 at 10:26:59 PM UTC-7 Tomasz Lewicki wrote: > > I don't know how or why it works that way. Unfortunately, as I wrote > earlier, the station does not belong to me and I have no physical access to > it. When I entered AP mode (that's exactly what the manual calls it), a new > one called PWS-nnnnnn (nnnnnn are the last six digits of the MAC address) > appeared in the list of wireless networks. I would then connect - without a > password - to that AP. But when the Garni is in AP mode, it does not > transmit data to the Internet, i.e. to the home router - I see it because > WU isn't refreshed. I have to leave AP mode for it to start sending data > again. But at the same time, when leaving AP mode, my laptop stops > receiving packets from Garni's panel. > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/0c208189-3be6-4d25-ab57-89973f5334e6n%40googlegroups.com.
