I've confirmed this on my own Envoy. I've created issue #1004
<https://github.com/weewx/weewx/issues/1004> to track.

On Thu, Jun 5, 2025 at 4:20 PM pannetron <[email protected]> wrote:

> My setup is a Vantage Pro2 ISS transmitting to an Envoy connected to a
> Raspberry Pi5. WeeWX 5.1.0 install went fine with the default station ID
> (iss_id) set to 1. My neighborhood has another Vantage Pro on ID 1 so I
> wanted to be a good neighbor and change my station's ID to 5. Using "weectl
> device --set-transmitter-type=1,10" set the ID 1 device to inactive but
> left it marked as ISS. Running "weectl device -set-transmitter-type=5,0"
> returned success but failed to set the type to ISS although it did
> "activate" ID 5. As a workaround, I connected my Envoy to a PC with Davis
> software and configured the Envoy for ISS ID of 5. Reattaching the Envoy to
> the Pi and running "weectl device --info", I now see device ID 5 is active
> *and* an ISS. After configuring the Envoy with the Davis software, I'm back
> up and running fine with the station ID set to 5.
>
> Perhaps there's an issue in "weectl device --set-transmitter-type"
> commanding the Envoy?
>
> Cheers,
>
> Russ P
> Nederland CO
> https://panneton.net/weather
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To view this discussion visit
> https://groups.google.com/d/msgid/weewx-user/b697f571-4774-409f-896e-62ba6313e143n%40googlegroups.com
> <https://groups.google.com/d/msgid/weewx-user/b697f571-4774-409f-896e-62ba6313e143n%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion visit 
https://groups.google.com/d/msgid/weewx-user/CAPq0zEDA5vinaaoL5nkpSpcwegtjdGYiB2ygDOPSaOuWBePNUw%40mail.gmail.com.

Reply via email to