weewx is not different from the weewx database 😉 - the database is part
of weewx.
I think what you are talking about is the depiction of the database (and
current) data in a skin,n the weewx word for a web page, by default the
Seansons skin.
How database data are depicted there depends on the definitions made in
skin.conf - and usually that's what you want to see - the daily
accumulation of rain broken down into
timeslots and the accumulated rain in that period. Nothing wrong with it.
However, if you want to see something else, you have to change the
depiction in your skin.conf
I suggest you read the weewx documentation and make yourself familiar
with what options exist in the different stanzas (the [] [[]] etc.
sections) and choose the one you like.
https://www.weewx.com/docs/5.1/custom/custom-reports/
by the way 0.024 inches are 0.06 mm or 6 ml/m^2 - not really much ....
On 24.06.2025 11:33, [email protected] wrote:
Hi all,
I have a new WS90 and HP2560 successfully sending data to weewx, but I
am struggling with rain
I have read loads of posts and have
[[sensor_map_extensions]]
    rain = drain_piezo
    rainRate = rrain_piezo
configured under
[Interceptor]
I can see rain being added to the db, but in weewx I am seeing the
rain as accumulating, ie every report of "'drain_piezo': 0.024" add
another 0.024 so after a few hours it thinks there has been a massive
amount of rain
Debug gives
Jun 24 10:33:16 weather weewxd[1156]: DEBUG user.interceptor: raw
packet: {'dateTime': 1750757595, 'usUnits': 1, 'stationtype':
'EasyWeatherPro_V5.2.2', 'model': 'HP2564AE_Pro_V1.9.8',
'yrain_piezo': 0.028, 'runtime': 146104.0, 'temperature_in': 67.5,
'humidity_in': 59.0, 'barometer': 29.208, 'pressure': 29.208,
'temperature_out': 56.5, 'humidity_out': 93.0, 'wind_dir': 155.0,
'wind_speed': 1.79, 'wind_gust': 4.47, 'maxdailygust': 11.41,
'solar_radiation': 213.81, 'uv': 1.0, 'temperature_5': 61.9,
'humidity_5': 76.0, 'rrain_piezo': 0.0, 'erain_piezo': 0.0,
'hrain_piezo': 0.0, 'drain_piezo': 0.024, 'wrain_piezo': 0.028,
'mrain_piezo': 0.028, 'rain_total_piezo': 0.028, 'ws90cap_volt': 4.3,
'ws90_ver': 150.0, 'gain0': 1.0, 'gain1': 1.0, 'gain2': 1.0, 'gain3':
1.0, 'gain4': 1.0, 'battery_5': 0.0, 'wh90batt': 2.94, 'interval':
60.0, 'rain_piezo': 0.0}
Jun 24 10:33:16 weather weewxd[1156]: DEBUG user.interceptor: mapped
packet: {'dateTime': 1750757595, 'usUnits': 1, 'pressure': 29.208,
'barometer': 29.208, 'outHumidity': 93.0, 'inHumidity': 59.0,
'outTemp': 56.5, 'inTemp': 67.5, 'windSpeed': 1.79, 'windGust': 4.47,
'windDir': 155.0, 'radiation': 213.81, 'rain': 0.024, 'rainRate': 0.0,
'UV': 1.0, 'extraTemp5': 61.9, 'extraHumid5': 76.0, 'bat_wind': 2.94,
'bat_rain': 4.3}
--
You received this message because you are subscribed to the Google
Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected].
To view this discussion visit
https://groups.google.com/d/msgid/weewx-user/a6fe41c6-1626-43d5-a75e-8191bb77e471n%40googlegroups.com
<https://groups.google.com/d/msgid/weewx-user/a6fe41c6-1626-43d5-a75e-8191bb77e471n%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion visit
https://groups.google.com/d/msgid/weewx-user/16979cb9-e77c-42ff-a4d6-e3f6f8931622%40gmail.com.
