Ok. Any suggestions? vince schrieb am Dienstag, 2. Dezember 2025 um 20:42:19 UTC+1:
> Then follow the old sysadmin motto of "when in doubt comment it out" and > see if that helps any. > > On Tuesday, December 2, 2025 at 11:25:13 AM UTC-8 Zed wrote: > >> >> Off course, i did restart weewx ;-) >> vince schrieb am Dienstag, 2. Dezember 2025 um 19:01:03 UTC+1: >> >>> Edit the driver and restart weewx >>> >>> On Tuesday, December 2, 2025 at 9:45:44 AM UTC-8 Zed wrote: >>> >>>> Yes, it's bme280wx from WJCarpenter >>>> <https://gitlab.com/wjcarpenter/bme280wx/-/blob/master/README.md>. >>>> In ~weewx/weewx-data/bin/user/bme280wx.py I changed: >>>> # loginf('BME280 data %s' % bme280data) >>>> logdbg('BME280 data %s' % bme280data) >>>> >>>> But no change (debug=0): >>>> >>>> Dez 02 18:42:46 raspberrypi-W weewxd.py[394495]: bme280: >>>> {'outHumidity': 98.0, 'outTemp': 5.1, 'windDir': 135.0, 'rain_total': >>>> 910.0, 'windSpeed': 0.0, 'outTempBatteryStatus': 1, 'dateTime': >>>> 1764697363, >>>> 'usUnits': 17, 'rain': 0.0, 'pressure': 996.8794121453019, 'inTemp': >>>> 20.87991048009717, 'inHumidity': 47.00716895052753} >>>> Dez 02 18:42:59 raspberrypi-W weewxd.py[394495]: bme280: BME280 data >>>> compensated_reading(id=90b874ac-5f0e-4dee-ab91-6ff37be85f0f, >>>> timestamp=2025-12-02 17:42:59.009837UTC, temp=20.905 °C, pressure=996.95 >>>> hPa, humidity=47.03 % rH) >>>> Dez 02 18:42:59 raspberrypi-W weewxd.py[394495]: bme280: >>>> {'outHumidity': 98.0, 'outTemp': 5.1, 'windDir': 135.0, 'rain_total': >>>> 910.0, 'windSpeed': 0.0, 'outTempBatteryStatus': 1, 'dateTime': >>>> 1764697375, >>>> 'usUnits': 17, 'rain': 0.0, 'pressure': 996.9454680536317, 'inTemp': >>>> 20.905063962284476, 'inHumidity': 47.0306761168033} >>>> Dez 02 18:43:10 raspberrypi-W weewxd.py[394495]: bme280: BME280 data >>>> compensated_reading(id=e62d5c77-9d93-45ca-a37c-f2050e454beb, >>>> timestamp=2025-12-02 17:43:10.939289UTC, temp=20.870 °C, pressure=996.95 >>>> hPa, humidity=47.02 % rH) >>>> >>>> This looks to me, like the log-messages are written by weewxd.py. >>>> vince schrieb am Dienstag, 2. Dezember 2025 um 17:48:49 UTC+1: >>>> >>>>> You didn't say which bme280 driver you are using, but if you are using >>>>> the one from WJCarpenter there are a couple places in the >>>>> new_loop_packet( >>>>> ) routine that use loginf( ) to log every packet twice. You could change >>>>> that to logdbg( ) in each place to quiet it down to only logging if you >>>>> have debug=1 in weewx.conf >>>>> >>>>> On Tuesday, December 2, 2025 at 2:07:30 AM UTC-8 Zed wrote: >>>>> >>>>>> I had to upgrade my VEnv-installation from 4.9.1 to 5.2.0. >>>>>> Since then for every measurement i see a record like these in the log: >>>>>> Dez 01 23:36:59 server weewxd.py[165343]: bme280: {'outHumidity': >>>>>> 84.0, 'outTemp': 2.6, 'windDir': 180.0, 'rain_total': 908.8, >>>>>> 'windSpeed': >>>>>> 0.0, 'outTempBatteryStatus': 1, 'dateTime': 1764628616, 'usUnits': 17, >>>>>> 'rain': None, 'pressure': 997.3836082289309, 'inTemp': >>>>>> 19.531694481620796, >>>>>> 'inHumidity': 48.77856343381041} >>>>>> Dez 01 23:37:11 server weewxd.py[165343]: bme280: BME280 data >>>>>> compensated_reading(id=2e17ef34-6cf1-4a6c-9198-e2754bdbd3b3, >>>>>> timestamp=2025-12-01 22:37:11.402537UTC, temp=19.512 °C, pressure=997.33 >>>>>> hPa, humidity=49.07 % rH) >>>>>> Dez 01 23:37:11 server weewxd.py[165343]: bme280: {'outHumidity': >>>>>> 84.0, 'outTemp': 2.6, 'windDir': 180.0, 'rain_total': 908.8, >>>>>> 'windSpeed': >>>>>> 0.0, 'outTempBatteryStatus': 1, 'dateTime': 1764628628, 'usUnits': 17, >>>>>> 'rain': 0.0, 'pressure': 997.3252012242718, 'inTemp': >>>>>> 19.511572013102704, >>>>>> 'inHumidity': 49.071948952003744} >>>>>> >>>>>> No matter what debug-level is set. >>>>>> Is there a switch to turn these messages off? >>>>> >>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/e804bd72-4df0-4910-8400-f9d05896a851n%40googlegroups.com.
