On your host grattans.org, is "/public_html/WeeWX" the folder containing
your web site ?
If not, you have to change the path to point to the rignt folder :
enable = true
server = grattans.org
user = mk0a7kyn5q5j
path = ??????????
Le vendredi 15 mai 2026 à 17:32:04 UTC+2, [email protected] a écrit :
> After finally getting my FTP working (many thanks to all!) I am trying to
> move to RSYNC but having problems.
>
> Following Vince's guide, I have created keys and moved them to my web
> server grattans.org.
> Testing, I can ssh to grattans.org with no password. However, running
> RSYNC in weewx.conf is coming up with errors.
>
> ERROR weeutil.rsyncupload: rsync reported errors. Original command:
> ['rsync', '--archive', '--stats', '-e', 'ssh',
> '/home/pi/weewx-data/public_html/',
> '[email protected]:/public_html/WeeWX']
> May 15 10:45:25 rpi5trixie weewxd[659616]: ERROR weeutil.rsyncupload: ****
> tput: No value for $TERM and no -T specified
> May 15 10:45:25 rpi5trixie weewxd[659616]: ERROR weeutil.rsyncupload: ****
> rsync: mkdir "/public_html/WeeWX" failed: No such file or directory (2)
> May 15 10:45:25 rpi5trixie weewxd[659616]: ERROR weeutil.rsyncupload: ****
> rsync error: error in file IO (code 11) at main.c(661) [Receiver=3.1.3]
>
> My syslog also has many lines like the following:
>
> failed: Read-only file system [v8.2504.0 try
> https://www.rsyslog.com/e/2207 ]
> 2026-05-12T22:00:16.785339-04:00 rpi5trixie rsyslogd: error during config
> processing: omfile: creating parent directories for file
> '/home/pi/weewx-data/log/weewx.log' failed: Read-only file system
> [v8.2504.0 try https://www.rsyslog.com/e/2207 ]
> 2026-05-12T22:00:16.846607-04:00 rpi5trixie rsyslogd: error during config
> processing: omfile: creating parent directories for file
> '/home/pi/weewx-data/log/weewx.log'
>
> My RSYNC section of weewx.conf is based on my working FTP section:
>
> [[FTP]]
> # FTP'ing the results to a webserver is treated as just another
> report,
> # albeit one with an unusual report generator!
> skin = Ftp
>
> # If you wish to use FTP, set "enable" to "true", then fill out the
> # next four lines.
> # Use quotes around the password to guard against parsing errors.
> enable = false ##false
> user = mk0a7kyn5q5j
> password = H0xxxx
> server = grattans.org # The ftp server name, e.g,
> www.myserver.org
> path = /public_html/WeeWX # The destination directory, e.g.,
> /weather
>
> # Set to True for an FTP over TLS (FTPS) connection. Not all
> servers
> # support this.
> secure_ftp = False
>
> # To upload files from something other than what HTML_ROOT is set
> # to above, specify a different HTML_ROOT here.
> HTML_ROOT = public_html
>
> # Most FTP servers use port 21.
> port = 21
>
> # Set to 1 to use passive mode, zero for active mode
> passive = 1
>
> [[RSYNC]]
> # rsync'ing to a webserver is treated as just another report.
> skin = Rsync
>
> # If you wish to use rsync, you must configure passwordless ssh
> using
> # public/private key authentication from the user account that
> weewx
> # runs to the user account on the remote machine where the files
> # will be copied.
> #
> # If you wish to use rsync, set "enable" to "true", then
> # fill out server, user, and path.
> # The server should appear in your .ssh/config file.
> # The user is the username used in the identity file.
> # The path is the destination directory, such as
> /var/www/html/weather.
> # Be sure that the user has write permissions on the destination!
> enable = true
> server = grattans.org
> user = mk0a7kyn5q5j
> path = /public_html/WeeWX
>
> # To upload files from something other than what HTML_ROOT is set
> # to above, specify a different HTML_ROOT here.
> #HTML_ROOT = public_html
> log_success = true # log successful uploads (default =
> false)
> log_failure = true # log unsuccessful uploads (default
> = false)
>
> # Rsync can be configured to remove files from the remote server if
> # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if
> you
> # make a mistake in the remote path, you could could
> unintentionally
> # cause unrelated files to be deleted. Set to 1 to enable remote
> file
> # deletion, zero to allow files to accumulate remotely.
> delete = 0
>
> My ~/.ssh directory:
>
> (weewx-venv) pi@rpi5trixie:~/weewx-data $ ll ~/.ssh
> total 28
> -rw-rw-r-- 1 pi pi 90 May 14 16:33 config
> -rw------- 1 pi pi 2098 May 14 10:23 known_hosts
> -rw------- 1 pi pi 1262 May 14 07:37 known_hosts.old
> -rw------- 1 pi pi 2602 May 12 14:04 old_id_rsa
> -rw-r--r-- 1 pi pi 567 May 12 14:04 old_id_rsa.pub
> -rw------- 1 pi pi 399 May 14 10:12 weewx
> -rw-r--r-- 1 pi pi 95 May 14 10:12 weewx.pub
>
> My local /.ssh/config: *[does this need to be on the web host also?]*
>
> host grattans.org
> hostname grattans.org
> user mk0a7kyn5q5j
> identityfile ~/.ssh/weewx
>
> Can anyone spot the problem. I have tried to follow Vince's directions but
> have messed up somewhere. Thanks in advance.
>
> Cheers,
> Bob
>
>
>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion visit
https://groups.google.com/d/msgid/weewx-user/9a751894-ecc0-4382-858e-38f5371cf043n%40googlegroups.com.
