Vince,
Thanks, I get the drift and didn't know if there were some internal
design goals that were considered when the designers hatched WeeWx.
Since you are familiar with this program and have written things for it,
I take your advice seriously.
The hardware is Campbell Scientific datalogger (both CR1000 and CR3000)
and can write as seldom as needed (which is of little value) or up to at
least 100/second, which is indeed excessive.
So far my test bed has been writing serial output every 20 seconds and
is pretty happy with that. I will make sure that the gust data, which
could be missed if WeeWx were doing all the monitoring during that 20
second interval) is furnished by the datalogger, just to make sure.)
I'm not so concerned about the occasional missed higher number and if I
read the discussions about what constitutes a gust, it might not be that
two second wind blast during a downpour.
Thank you for the info. Dale
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion visit
https://groups.google.com/d/msgid/weewx-user/7ddeefaf-1be7-449f-a466-400e44bc74b3%40gmail.com.
