[Wengophone-devel] SIP wengo proxy with linphonec (command line tool)

Alexis MS Tue, 27 Jun 2006 02:27:48 -0700

Dear wengo developpers,

I would like to use a command line softphone to call with my wengo account. I have tried linphonec (simon morlat's command line softphone) but I don't manage to be recognized by a wengophone and to do call with ... (see error in the email below ... Reason: q.850;cause=127).

My goal would be to pass several SIP call from one computer (linux), Is there a solution to do that with wengo SIP proxy?

Faithfully,

Alexis Deltour.

Simon Morlat <[EMAIL PROTECTED]> a écrit :

De: Simon Morlat <[EMAIL PROTECTED]>
À: Alexis Deltour <[EMAIL PROTECTED]>
Objet: Re: [Linphone-users] linphonec with SIP proxy wengo
Date: Fri, 21 Apr 2006 14:46:35 +0200

Thanks.

The reason why the outgoing call from linphonec fails is this error reported
by the server:

SIP/2.0 480 Error
Allow: UPDATE,REFER
Call-ID: [EMAIL PROTECTED]
Contact:
CSeq: 21 INVITE
From: ;tag=1993735272
Reason: q.850;cause=127
Record-Route:
Server: Cirpack/v4.39a (gw_sip)
To: ;tag=00-07966-0195edb9-424357e81
Via: SIP/2.0/UDP
192.168.1.162:5060;received=194.51.93.143;rport=36246;branch=z9hG4bK1206706130
Content-Length: 0

This does not tell us what linphone is supposed to do wrong.
Maybe you can ask wengo what they think of that error with "Reason:
q.850;cause=127".

Concerning the segmentation fault during an incoming call, this is a different
problem.
Can you run linphone from gdb in order to get a backtrace:
the procedure is simple:
gdb linphonec
run -d 6
and after it has crashed, just type:
bt full

Thanks

Simon

Le Mercredi 12 Avril 2006 18:09, Alexis Deltour a écrit :
> The attached file "linphonec.log" have been created
> with the command line : linphonec -d 6 -l
> linphonec.log
>
>
> first, Registration on sip:voip.wengo.fr was
> sucessful.
> then I try to "call alexis.deltour" --> linphonec
> displays : "sip:[EMAIL PROTECTED]" and
> "User is temporarily unavailable." further secondes
> later.
>
> finally, I try to call the linphonec with a wengophone
> (alexis.deltour user) on windows XP --> linphonec
> displays :"Anonymous"
> is calling you.
>
> I don't answer : "You have missed 1 call(s)."
>
> And In the case I "answer" --> segmentation fault ??
>
> Faithfully
>
> Alexis Deltour.
>
> --- Simon Morlat <[EMAIL PROTECTED]>a écrit :
> > Hello,
> >
> > I think it would be better to set guess_hostname=1.
> > Can you send a full log using "linphonec -d 6" ?
> > Thanks
> >
> > Simon
> >
> > Le Vendredi 7 Avril 2006 17:28, Alexis Deltour a
> >
> > écrit :
> > > Dear,
> > >
> > > I'm using linphonec (from linphone 1.3.4 version)
> >
> > and configuration file
> >
> > > below :
> > >
> > > [net]
> > > con_type=4
> > > use_nat=0
> > >
> > > [sip]
> > > sip_port=5060
> > > guess_hostname=0
> > > [EMAIL PROTECTED]
> > > inc_timeout=15
> > > use_info=0
> > > use_ipv6=0
> > > default_proxy=0
> > >
> > > [rtp]
> > > audio_rtp_port=7078
> > > video_rtp_port=9078
> > > audio_jitt_comp=60
> > > video_jitt_comp=60
> > >
> > > [sound]
> > > playback_dev_id=0
> > > ringer_dev_id=0
> > > capture_dev_id=0
> > > rec_lev=80
> > > play_lev=80
> > > ring_lev=80
> > > source=m
>
> local_ring=/usr/share/sounds/linphone/rings/oldphone.wav
>
> > remote_ring=/usr/share/sounds/linphone/ringback.wav
> >
> > > [video]
> > > enabled=0
> > > show_local=0
> > >
> > > [audio_codec_0]
> > > mime=PCMU
> > > rate=8000
> > > enabled=1
> > >
> > > [audio_codec_1]
> > > mime=GSM
> > > rate=8000
> > > enabled=1
> > >
> > > [audio_codec_2]
> > > mime=PCMA
> > > rate=8000
> > > enabled=1
> > >
> > > [audio_codec_3]
> > > mime=speex
> > > rate=8000
> > > enabled=1
> > >
> > > [audio_codec_4]
> > > mime=speex
> > > rate=16000
> > > enabled=1
> > >
> > > [audio_codec_5]
> > > mime=1015
> > > rate=8000
> > > enabled=1
> > >
> > > [audio_codec_6]
> > > mime=iLBC
> > > rate=8000
> > > enabled=1
> > >
> > > [proxy_0]
> > > reg_proxy=sip:voip.wengo.fr
> > > reg_identity=sip:[EMAIL PROTECTED]
> > > reg_expires=600
> > > reg_sendregister=1
> > > publish=1
> > > reg_route=
> > >
> > > [auth_info_0]
> > > username=alexisdevel
> > > passwd=****************
> > > realm="voip.wengo.fr"
> > >
> > >
> > >
> > > I start and register successfully (linphonec
> >
> > displays : registration on
> >
> > > sip:voip.wengo.fr sucessful), but on a wengophone
> >
> > in another platform,
> >
> > > alexisdevel is not connected ...
> > >
> > > I manage to receive a call from the wengophone.
> >
> > Linphonec ring with an
> >
> > > anonymous caller ...
> > >
> > > But I don't manage to call the wengophone (with
> >
> > another user id) :
> > > I've tried : call user, call sip:user, call
> >
> > sip:[EMAIL PROTECTED]:5060,
> >
> > > call sip:[EMAIL PROTECTED]:5060
> > >
> > > Is my config file Ok ?? could you help me to
> >
> > resolve my problem
> >
> > > Faithfully
> > >
> > > Alexis Deltour.
>
> ___________________________________________________________________________
> Faites de Yahoo! votre page d'accueil sur le web pour retrouver directement
> vos services préférés : vérifiez vos nouveaux mails, lancez vos recherches
> et suivez l'actualité en temps réel. Rendez-vous sur
> http://fr.yahoo.com/set

_______________________________________________
Wengophone-devel mailing list
[email protected]
http://dev.openwengo.com/mailman/listinfo/wengophone-devel

[Wengophone-devel] SIP wengo proxy with linphonec (command line tool)

Reply via email to