I've seen problems like this where the other proxy was wanting to register and the proxy you are registered is not able to respond. Are you sure this is not the case here?
_____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of michel memeteau Sent: 07 March 2007 13:24 To: [email protected] Subject: Re: [Wengophone-devel] RE: SIP Generic bug Hi , I just test today the 10164 windows Build over a http proxy : * when calling a sip URI through a contact or though the "address box" , the call is working but the call id display is still only the first part of the SIP URI , and call history does not show the sip server either . * Call to a sipphone adress [EMAIL PROTECTED] succeed but calls to [EMAIL PROTECTED] or [EMAIL PROTECTED] does not ( either no sound or the call just hang ) , I was wondering if it could be a codec problems or a generic SIP adress handling one ? My point of view : a lot of efforts have been done in interoperability for SIP in the wengo dev team . But if it's still not easy to call/add a SIP address , then wengo won't be used as a SIP softphone such as ekiga and xlite , and most of the users will only do wengo to wengo calls . ... On 01/03/07, Lukas Oberhuber <[EMAIL PROTECTED]> wrote: Also, the fix to modify the SIP account didn't work. It still crashes with the latest revision as of midday. I think there are some UI files missing, etc. -Lukas _____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lukas Oberhuber Sent: 28 February 2007 14:26 To: 'Xavier DESJARDINS' Cc: [email protected] Subject: [Wengophone-devel] RE: SIP Generic bug Xavier, Just tested on the new build: I dialled: sip:+61892880790@ aarnet.edu.au <http://aarnet.edu.au> Everything in the UI shows +61892880790, but the call is dialled correctly. On redial, the call was made to sip:[EMAIL PROTECTED] So I can confirm the fix works. However, I feel like the UI should probably show the full URI in cases where the server is not a match, no? Also, would be great if the installer would have an option to set up sip: links to open wengophone and dial (probably present the option to the user to choose.). Here is a page to use to test: http://www.voip-info.org/wiki/view/Phone+Numbers -Lukas Lukas Oberhuber _____ From: [EMAIL PROTECTED] [mailto: <mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED] On Behalf Of Xavier DESJARDINS Sent: 28 February 2007 09:37 To: Lukas Oberhuber Cc: [email protected] Subject: Re: SIP Generic bug 2007/2/28, Lukas Oberhuber < [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> >: - When editing a contact, SIP ID (in simple mode), does not appear - Call history (all histories) do not store the full SIP uri when the call is not to an account of the same server: i.e. sip:[EMAIL PROTECTED] would get recorded as +456789 and on subsequent calls would dial that -Lukas Lukas Oberhuber Hi Lukas, The probleme with call history is fixed in rev10004. I'll look at contact editing. Xavier _______________________________________________ Wengophone-devel mailing list [email protected] http://dev.openwengo.com/mailman/listinfo/wengophone-devel -- %<------------------------------------------------------->% Michel memeteau VOIP: sip:[EMAIL PROTECTED] 0491886375 0624808051 jabber/GoogleTalk : [EMAIL PROTECTED]
_______________________________________________ Wengophone-devel mailing list [email protected] http://dev.openwengo.com/mailman/listinfo/wengophone-devel
