Dave Neary wrote:
Hi Lars,
Your question is more appropriate for the developer's mailing list -
which I've added to the CC line. I'm afraid I don't know the answer.
Minh is the resident SIP expert - perhaps he can give you some pointers.
Cheers,
Dave.
[EMAIL PROTECTED] wrote:
Hello,
due to latest release of openwengo phone 2.1
I gave it a test, but run into troubles with
my logical ip addresses and my private network:
I have two network interface cards on my winxp host
installed:
1. NIC: ip address via DHCP assigned (172.20....)
2. NIC: ip address 192.168.2.123
My SIP Proxy is in the 192.168.2.0/24 network,
which I configured in wengo phone, but the Register
Message still contains the DHCP assigned address
in contact and later on in media path.
How to configure the phone to bind only to a specific
local ip address and use this address in sip messages?
Thanks in advance!
Lars
Lars,
eXosip and thus phApi and thus Wengophone have a problem on multihomed
machines....
It is not trivial to solve....
Sorry for the bad news
Vadlm
_______________________________________________
Wengophone-devel mailing list
[email protected]
http://dev.openwengo.com/mailman/listinfo/wengophone-devel
