That's it.
I just add the line '#define HAVE_SELECT 1' in the config.h file and re-compile. And all is working fine now. Thanks a lot for your support. Best regards Nicolas Varney Hrvoje Niksic <[EMAIL PROTECTED]> on 03/06/2004 09:53:08 To: Nicolas Varney/Interne/[EMAIL PROTECTED] cc: [EMAIL PROTECTED] Subject: Re: -T parameter on HP-UX port [EMAIL PROTECTED] writes: > For the second point. I didn't compile wget myself, I use the version published > on HP-UX Software Porting Center (http://hpux.connect.org.uk/) > So I get the official sources and HP-UX Software Porting Center sources and > compile both version. > > Results are the same. No time out occurs. The problem is that configure doesn't correctly detect the "select" system call: > configure:11676: checking for select > configure:11726: gcc -o conftest -O2 -Wall -Wno-implicit conftest.c >&5 > configure:11756: error: conflicting types for `select' > /usr/include/sys/time.h:489: error: previous declaration of `select' > configure:11729: $? = 1 > configure: failed program was: [...] > configure:11746: result: no It seems configure's way of checking for select simply fails on HPUX. :-( For now, you can edit `config.h' after running configure and simply change #undef HAVE_SELECT to #define HAVE_SELECT 1. If the compilation works, the timeout should work again.
