Indeed it does. However '6'. I have used the mib extractor this is a
mystery area new to me....I need a good resource..got one ?
I have had alerts sent on traps though so I'm making progress.
Cheers
From: "Michael Patterson" <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
To: <[EMAIL PROTECTED]>
Subject: [WhatsUp Forum] traps defined
Date: Thu, 28 Jun 2001 17:54:32 -0700
Hello,
The empty box next to the 'On Trap' is for the trap #. If you enter a trap
# 0-6, all others are filtered. The definitions of these 7 are in the WUG
manual. I would start off by not putting anything in the box.
Chapter 8:
Trap # Trap Description
0 Cold start The device is rebooting itself and may change its configuration
or the SNMP agent's configuration.
1 Warm start The device is rebooting itself but neither the device's nor the
SNMP agent's configuration will change.
2 Link down One of the communication links for the device is down.
3 Link up One of the communication links for the device is back up.
4 Authorization failure The device has received a protocol message that is
not properly authenticated.
5 EGP neighbor loss An EGP neighbor for which the device is an EGP peer is
down and the peer relationship no longer exists.
6 Vendor-provided traps The SNMP specification lets vendors define
enterprise specific traps, for example a trap that occurs on a particular
vendor's router. Use the MIB extractor application to add the
vendor-provided traps to WhatsUp Gold .
Hope that helps.
Michael Patterson
Somix Technologies
(207)324-8805 x222
www.SOMIX.com check out Denika for WhatsUp Gold (MRTG integration)
www.whatsupgold.net
[EMAIL PROTECTED]
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of
[EMAIL PROTECTED]
Sent: Thursday, June 28, 2001 11:52 AM
To: [EMAIL PROTECTED]
Subject: Re: [WhatsUp Forum] On Trap, in the alert tab...
Isn't it the SNMP community name?
Chris Powers
Associate Network Engineer
Keane IT Technical Services
x1730
"Jeremy Thomas"
<[EMAIL PROTECTED]> To:
[EMAIL PROTECTED]
Sent by: cc:
[EMAIL PROTECTED] Subject:
[WhatsUp
Forum] On Trap, in the alert tab...
switch.com
06/28/2001 10:56 AM
Please respond to
WhatsUp_Forum
Dear all
We have Vers 5.01 of WUP Gold.
We are successfully receiving alerts for devices. In the Alerts tab of
device properties there are boxes to tick. 1 is 'send up alert' another is
'On Trap' followed by an empty box..
SNMP is configured and traps are sent but I want an alert when a trap is
sent. What is the required input for this box; is it optional ?
Please help
Regards
Jeremy
C.I
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
