To all:
I am brand new to WUG, SNMP, MIBs and this list. I could use some
advice.
I've been charged to configure WUG to monitor a remote Win2K machine's
HD space and CPU utilization. I have to admit that I'm rather
roadblocked right now.
The scenario:
The remote machine runs Win2K Server, has an IP address of 192.168.1.x
and sits behind a firewall and router. The monitoring machine is
running WUG 6.02 and sits directly on the Internet (i.e. public IP
address).
What I've done:
A. On the remote Win2K machine, I've installed the SNMP Service,
configured an agent to monitor "physical," "applications" and
"end-to-end." I've configured a trap for the public community, and set
the trap destination to the IP address of the monitoring machine.
B. On the monitoring machine, I've created a WUG map with a server,
checked the "SNMP Manageable Device" option, set the read community to
public and set the polling method to ICMP. If I right-click on the
server icon and select "SNMP View," the SNMPView window seems to go into
this endless "Getting..." loop.
Any suggestions how to proceed from here?
Thanks in advance,
Brad Dinerman
______________________________________
Bradley J. Dinerman
12 Kings Row
Ashland, MA 01721
(508) 231-8813
http://www.dinerman.com
"Before you criticize someone, you should walk a mile in his shoes.
That way, when you criticize him, you're a mile away, and you have his
shoes."
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
