Up until v7 you needed a device icon per router interface you wanted to monitor and you monitored the IP of that router interface. In v7 you can define and attach interfaces to devices as if they were services. They are visualized as colored "link" lines.
see page 53 of the manual for some additional info on link lines in general. Interfaces on Routers and Switches can be discovered using the SNMP Smart Scan (File | New Map Wizard) and this is probably the easiest way to get them configured - or - you can just visit the properties of an SNMP enabled switch or router and select "Auto Discover" on the "Services" page. Note you need to have the SNMP community string entered in the SNMP page for this device to discover interfaces in this way. ----- Original Message ----- From: "Jubel Caudill" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, January 29, 2002 3:41 PM Subject: [WhatsUp Forum] Enhanced Multiple Interface Support > Enhanced Multiple Interface Support.....this is listed as a new feature of > WUG7. I can't find any reference to it anywhere to tell how to implement it. > > suggestions greatly appreciated > > Jubel Caudill > Systems/Network Administrator > Colgate University > Hamilton, NY 13346 > [EMAIL PROTECTED] > 315.228.7885 > Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
