Gary, Most routers will give you FR sub interfaces in MIB II under "interfaces" so WUG will pick it up with discovery, Sadly some do not so you'll have to create a custom SNMP service using the MIBII frame relay MIB. I think you will have to compile in the MIBs to be able to find what you're looking for. The tree you will be working with is 1.3.6.1.2.1.10.32.2.1.
If you want to see bandwidth use on this circuit I suggest using Denika http://www.somix.com . Denika will discover frame relay out of the box. Mike Krygeris SOmix Technologies, INC. ---------- Original Message ---------------------------------- From: "Bradshaw, Gary" <[EMAIL PROTECTED]> Reply-To: [EMAIL PROTECTED] Date: Mon, 4 Feb 2002 14:56:04 +0100 >Any one know how to pickup the state of a DLCI on a frame circuit from a >Cisco router. We have several sub interfaces on a serial port and I want to >pick up if the DLCI is Active, Inactive or Deleted. > >Not quite what snmp item to look at and would appreciate a bit of detailed >info on how to set this up > > > > > >Gary Bradshaw >Global I.S Network Analyst >Voith Fabrics >Cartmell Road >Blackburn >BB2 2SZ > >Tel +44(0)1254-586853 >Fax +44(0)1254-674138 >Cell +44(0)7802-160696 > > > >-----Original Message----- >From: Dave Thornton [mailto:[EMAIL PROTECTED]] >Sent: 04 February 2002 12:03 >To: WhatsUp_Forum@list. ipswitch. com (E-mail) >Subject: [WhatsUp Forum] Anomalies with SNMP counters on frame relay link > > >Hello out there. > > >I am polling a router using WUG7 and SNMP and notice some anomalies on the >counters > >I have a frame relay link with 2 links one from each remote site (X and Y) >terminating on central site > >I would expect (over a number of samples) the values to add up....but they >dont > >Note these are the counters received on the central site on the overall >physical interface and the only 2 subinterfaces of that physical interface > > >ANyone got any ideas on why they dont add up? Over a long period of time >(several days) these counters go way out (50%) so I dont trust my data > >The transmit counters for these link DO add up ok.... > > >Very strange!!!! > > >I include the values below: > > <<...OLE_Obj...>> > > >This e-mail including any attachments is confidential and may be >legally privileged. If you have received it in error please advise the >sender immediately by return email and then delete it from your >system. >The unauthorised use, distribution, copying or alteration of this >email is strictly forbidden. If you need assistance please contact the help >desk on (+44)(0)870 8704820 > >Please visit http://www.ipswitch.com/support/mailing-lists.html >to be removed from this list. > >An Archive of this list is available at: >http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ > >Please visit http://www.ipswitch.com/support/mailing-lists.html >to be removed from this list. > >An Archive of this list is available at: >http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ > Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
