Rob, Your configuration of the service check should read: Send=GET /index.htm HTTP/1.0\r\nAccept: <snip> ... Expect=~.*Healthcare
Joe In reply to 1 Apr message from [EMAIL PROTECTED]: >WUG_0a18.wup) map poll start >ping 10.114.1.144 returned in 0 ms. 0 >Checking Test web Server : 00 : Test Web Server >[10.114.1.144] >>> COHS CHECK 80 on 10.114.1.144 >[10.114.1.144] connected >[10.114.1.144] 000: Expect=~send=get /index.htm HTTP/1.0\r\nAccept failed to receive >on connect (10004) >[10.114.1.144] <<< COHS EXIT=10004 >TCP/IP Service check complete. FAILED >Check Complete (-1) Test web Server : 00 : Test Web Server (WUG_0a18.wup) map poll >complete >Config >Expect=~Send=GET /index.htm HTTP/1.0\r\nAccept: >Expect=~.*Healthcare ># */*\r\nUser-Agent: Ipswitch_Whatsup/4.0\r\n\r\n >Rob >-----Original Message----- >From: Joe Sepielli [mailto:[EMAIL PROTECTED]] Sent: Thursday, March 28, 2002 >2:48 PM >To: [EMAIL PROTECTED] >Subject: RE: [WhatsUp Forum] >Rob, >Your debug reveals that you are monitoring the time server on port 37 on the host >'Web Server'. >Goto Device Properties->Services and you will see 'Time Server'. Remove that service >check then add the HTTP >Content Scan. >Regards, >Joe >In reply to 28 Mar message from [EMAIL PROTECTED]: >>(WUG_7985.wup) map poll start >>ping 10.114.1.144 returned in 10 ms. 0 >>Checking Web Server : 00 : Time Server >>[10.114.1.144] >>> COHS CHECK 37 on 10.114.1.144 >>[10.114.1.144] connect2 failed (10057) >>[10.114.1.144] <<< COHS EXIT=-1 >>TCP/IP Service check complete. FAILED >>Check Complete (-1) Web Server : 00 : Time Server (WUG_7985.wup) map >poll complete >>-----Original Message----- >>From: Joe Sepielli [mailto:[EMAIL PROTECTED]] Sent: Thursday, >March 28, 2002 8:49 AM >>To: [EMAIL PROTECTED] >>Subject: Re: [WhatsUp Forum] >>Rob, >>Modify the HTTP Content Scan: >>Assume this is the location that you would point you browser to: >http://Medassets.com/yourpahe.html >>- Set the port (default 80). >>- Set the time out if necessary(5 seconds default). - Modify the send >command: >> Send=GET /yourpage.html HTTP/1.0\r\nAccept: >>*/*\r\nUser-Agent:Ipswitch_Whatsup/4.0\r\n\r\n >>- Modify the expect command: >> Expect=~.*your text here >>- Now apply this to the Medassets.com device on your map. >>Test Tip: Create the device on a map all by itself. Open the debug log, >let it poll, >>and then watch the conversation between WhatsUp Gold and the target >host. >>Regards, >>Joe >>In reply to 28 Mar message from [EMAIL PROTECTED]: >>>I have Whatsup Glold 7.02 and I need to monitor a web site >>Medassets.com for a content scan to make >>>sure the page is available can someone Please Help Me. >>>Rob >>>Please visit http://www.ipswitch.com/support/mailing-lists.html to be >>removed from this list. >>>An Archive of this list is available at: >>>http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ >>Please visit http://www.ipswitch.com/support/mailing-lists.html to be >removed from this list. >>An Archive of this list is available at: >>http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ >>Please visit http://www.ipswitch.com/support/mailing-lists.html to be >removed from this list. >>An Archive of this list is available at: >>http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ >Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from >this list. >An Archive of this list is available at: >http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ >Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from >this list. >An Archive of this list is available at: >http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
