We're running Whatsup 6.03. Currently we load a main map which then loads all the other maps on startup.
I am looking at running it as a service and understand that in order for all the maps to load you need to have them entered in the "Configure\Program Options\Open maps on startup" box. Is there a way to add more than one at a time since there are about 130+ maps? The same also goes for defining web users access to maps? Any help would be appreciated. Jurgen Information contained in this message is confidential, may be legally privileged and is intended for the addressee only. If you have received this message in error, or there are any problems please notify the originator immediately. The unauthorised use, disclosure, copying or alteration of this message is strictly forbidden. English Welsh & Scottish Railway Limited and English Welsh & Scottish Railway International Limited (collectively "EWS") will not be liable for direct, special, indirect or consequential damages arising from this message, including but not limited to alteration of the contents by a third party or the effects of any computer virus that may be transmitted. Internet e-mails are not necessarily secure. EWS does not accept responsibility for a change to any e-mail that occurs after it is sent. For more information about EWS, please see our website:- http://www.ews-railway.co.uk English Welsh & Scottish Railway Limited, Registered Office: 310 Goswell Road London EC1V 7LW. Registered in England and Wales - Registered No : 2938988 English Welsh & Scottish Railway International Limited, Registered Office: 310 Goswell Road London EC1V 7LW. Registered in England and Wales - Registered No : 3232475 Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
