Thanks for the response, Robert.
When I drill down in the MIB to UPS AlarmUtilFailed, and then do a get, it
doesn't show an "equals" value. It simply displays UPSAlarmUtilFailed.
If, when selecting the item in the MIB, I also insert an instance value (0
or 1), and then do the get, it displays UPSAlarmUtilFailed.0 or
UPSAlarmUtilFailed.1, but no "equals" value. I'm still at a
loss...........
Chris Powers
Systems Engineer
MCSE, CNA, Network+, A+
Keane IT Technical Services
(617) 517-1730
"Glatt, Robert"
<[EMAIL PROTECTED]> To:
"'[EMAIL PROTECTED]'"
Sent by:
<[EMAIL PROTECTED]>
[EMAIL PROTECTED] cc:
switch.com Subject: RE: [WhatsUp Forum]
monitoring service on Liebert UPS
08/16/2002 08:06 AM
Please respond to
WhatsUp_Forum
when you go into nettools and get the value of the mib what does it give
you?? Put that in your service as the equal to value for up.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]
Sent: Thursday, August 15, 2002 4:47 PM
To: [EMAIL PROTECTED]
Subject: [WhatsUp Forum] monitoring service on Liebert UPS
Hi, people.
I'm not sure if I need assistance from Ipswitch or from Liebert on this, so
I'll put it out there for both.........
Got a Liebert 300 UPS with SNMP card configured to point to my WhatsUp Gold
server (ver. 7.03). I configured a service called
LiebertAlarmUtilityFailed, of service type "SNMP monitoring". Here it is:
(Embedded image moved to file: pic19629.pcx)
The last digit (.0) of the object ID number represents the "instance" that
I selected after traversing the Liebert MIB tree to
lcUPSAlarm/lcUPSAlarmConditions/lcUPSAlarmUtilFailed.
I've tried all combinations of value 0 or 1 and host is UP or DOWN. But
every time I poll the device, it reports the service as down. Anybody know
what configuration changes I need to make to make this service report as
UP? Every Tuesday morning at my workplace, the outside generator performs
a test and turns on and takes over our power, so that is my real-time test
that I can use to see if the service is correctly reporting as down.
Thanks much..........
Chris Powers
Systems Engineer
MCSE, CNA, Network+, A+
Keane IT Technical Services
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
