Hello, I have noticed the exact same thing
Kevin Bartholomew Computer Operations Analyst 2 Freightliner Corporate 503-745-5324 [EMAIL PROTECTED] -----Original Message----- From: Chuck Ball [mailto:cball@;verio.net] Sent: Friday, November 08, 2002 8:12 AM To: [EMAIL PROTECTED] Subject: RE: [WhatsUp Forum] calculations It worked for me, thanks! I do have one more question, though... I have to monitor several remote Data Centers, which includes many hops through the internet. We are running a ping on each hop through the static routes for all our servers. From time to time, there are changes in the route. A router may be removed, for example. When this happens, even though we are disabling monitoring on them, we still get alerts on the marquee. I would like the marquee to not show these hops when they are no longer monitored, but I have to actually completely remove them from the maps before they go away on the marquee. Anyone know how to fix that? Thanks, Chuck Ball > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:WhatsUp_Forum-owner@;list.ipswitch.com]On Behalf Of Kevin > Bartholomew > Sent: Friday, November 08, 2002 10:15 AM > To: '[EMAIL PROTECTED]' > Subject: RE: [WhatsUp Forum] calculations > > > > Hello Scott, > > I think something happened to the ZIP file it is empty. I like > your idea!! > > > > > > Kevin Bartholomew > Computer Operations Analyst 2 > Freightliner Corporate > 503-745-5324 > [EMAIL PROTECTED] > > > > -----Original Message----- > From: Scott Taylor [mailto:ScottTaylor@;westat.com] > Sent: Friday, November 08, 2002 6:40 AM > To: '[EMAIL PROTECTED]' > Subject: RE: [WhatsUp Forum] calculations > > > Robert, I thought about your idea and put together a script that > calculates > the current down time of a device. What I did was incorporate it into the > "marquee" code that Chris sent a while back. In the marquee, the device > that's down is listed along with how long it has been recently down. > Example: SERVER1 (17 min). It works best if your polling cycles > are in 30 > or 60 second increments, mostly so you don't end up with long > fractions such > as (17.33333333 min). > > I also enhanced the code to strip away subnets from the marquee. I found > that when a device went down, both the device and the subnet map would be > displayed. Now only devices are shown and the subnet maps are ignored. > > I have attached a ZIP file with the templates that were changed > (TOPVIEW.ASP > & MAP.ASP). > > > Scott Taylor > > > > -----Original Message----- > From: Glatt, Robert [mailto:rglatt@;Kraft.com] > Sent: Thursday, November 07, 2002 11:28 AM > To: wug (E-mail) > Subject: [WhatsUp Forum] calculations > > > Does anyone have an easy way to do calculation on the web > interface. I would > like to take the MAP_POLL_INTERVAL which is in seconds, convert it to > minutes and then multiply it by the CURRENT_DOWN_COUNT. This would give me > the down time since the last succesful poll time. If I re-boot the WUG > server then all the down times would be since it re-started. IF I > reset the > counters then the DOWNTIME variable is the right number. However, I like > having it show the total since whenever. > > Please visit http://www.ipswitch.com/support/mailing-lists.html > to be removed from this list. > > An Archive of this list is available at: > http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ > > > > Please visit http://www.ipswitch.com/support/mailing-lists.html > to be removed from this list. > > An Archive of this list is available at: > http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
