RE: [WhatsUp Forum] How do I display MRTG Data in the WUG Web Interface

[Anthony Franklin]

If I understand correctly, I believe the issue is the private address access attempt across the internet. I think you will need to change the address to a public address.  If you do not have any public addresses available, run Address Translation.  Again, if I understand what you are saying.   Anthony Franklin, Network Engineer   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of John Ferguson Sent: Tuesday, November 26, 2002 10:24 AM To: [EMAIL PROTECTED] Subject: [WhatsUp Forum] How do I display MRTG Data in the WUG Web Interface   I have a Windows 2000 Server (in remote admin mode) running WUG 7.03.  I also have MRTG running on the machine.  I am using it to show the Traffic on my Internet and Frame Routers.  If I RDP into the machine, I can pull up IE5.5 and look at my MRTG graphs with no problem.   What I would like to be able to do is put a link in the info field of the device, similar to the following: (and be able to access the MRTG graphs remotely - without having to RDP into the box)   <a href="" Traffic Analysis </a>   This works fine, it shows up as the appropriate link and if I run the web interface on the Windows 2000 server (or the office network), I get the MRTG graph.    The problem is when I am remotely accessing the WUG box across the internet from home (or another site) - it is looking for the link on my home network, which does not exist.  I do not want to publish the MRTG stuff on the internet.  (I know that would be one way to solve my problem, but that is not an option.)   I am wondering if anyone has found a way to link to a page (or file) that is on the WUG machine, via the WUG web interface.   Thanks