He is probably right. I remove the "auto negotiate" feature always. Speed/Duplex
settings on servers should always be manually configured as well as the port to which
it is connected.
James McGovern Amann
Network Technician Lead
Georgia State University
IST / UCCS
95 Decatur St.
Suite 500
Atlanta, GA 30303
PH: 404.651.1574
FX: 404.651.4408
PG: 404.476.7754
[EMAIL PROTECTED]
>>> [EMAIL PROTECTED] 11/27/02 06:09AM >>>
I have been using a 3com 3C985B Gigabit NIC for more then a year. We use them on all
of our servers. You have to disable link negotiation on the NIC and on the switch port
your connected to.
Kevin Ogonowski
WAN Analyst
Palm Beach Co School District
-----Original Message-----
From: Dale Harrison [mailto:[EMAIL PROTECTED]]
Sent: Tue 11/26/2002 6:29 PM
To: '[EMAIL PROTECTED]'
Cc:
Subject: RE: [WhatsUp Forum] Compaq NC6136 Gigabit NIC
I had the exact same problem with a 3Com Gigabit Ethernet NIC. It was never
resolved so I just left it on my 100MB Ethernet. I don't think I've seen
anyone on this list have a working GigE NIC on their WUG server. I would
love to be proven wrong though.
Cheers,
Dale Harrison
-----Original Message-----
From: Chris Ohm [mailto:[EMAIL PROTECTED]]
Sent: November 26, 2002 2:40 PM
To: [EMAIL PROTECTED]
Subject: [WhatsUp Forum] Compaq NC6136 Gigabit NIC
Has anyone had any problems using a Compaq Gb nic?
I'm running WUG v7.04 on a Compaq DL360 G2 with a NC6136 Gb nic. I was able
to connect to the login page for the WUG website, but not the site itself
from another system.
I was able to connect to the website from the server that WUG itself is
installed on.
I disabled the Gb nic and connected one of the on-board 10/100/1000 nics
(100 Mb) and it worked fine. I would really like to use the Gb nic, so any
help would be greatly appreciated. I have a call opened with tech support,
but I haven't heard back yet, I'll repost if they come up with a solution.
Thanks everyone,
Chris Ohm
Systems Administrator
American Specialty Health
[EMAIL PROTECTED]
CONFIDENTIALITY NOTICE: This e-mail, and any attachments, are intended
solely for the use of the intended recipient and may contain information
that is confidential, proprietary, copyrighted and/or legally privileged.
Any unauthorized disclosure, distribution, or use of this information is
prohibited. If you are not the intended recipient, and have received this
message in error, please notify the sender immediately by reply e-mail and
destroy all copies of the original message and any attachments. Your
compliance is appreciated.
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
