You may need to enable and configure snmp on your ISDN router. Once you've done that you can manually add the device, then under properties for that device go to services and auto discover. You'll then be able to see the interfaces in WUG and setup your links on your map.
Jim -----Original Message----- From: Young, Andrew M. [mailto:[EMAIL PROTECTED]] Sent: Thursday, February 06, 2003 8:27 AM To: WhatsUp_Forum (E-mail) Subject: [WhatsUp Forum] ISDN link lines I'm having trouble setting up my maps with auto discover. Apparently, the snmp smart scan is not detecting my full time isdn wan links. I read in the user guide that SNMP smart Scan only detects "interfaces" Is there anyway I can quickly add these remotes to my network map? Thanks, -Andy Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
