You can use MS DOS *.bat files with parameters from WhatsUp for sending AT
commands to serial ports.
|---------+------------------------------------->
| | "Daniel Page" |
| | <[EMAIL PROTECTED]> |
| | Sent by: |
| | [EMAIL PROTECTED]|
| | pswitch.com |
| | |
| | |
| | 27.02.2003 01:29 |
| | Please respond to |
| | WhatsUp_Forum |
| | |
|---------+------------------------------------->
>------------------------------------------------------------------------------------------------------------------------------|
|
|
| To: [EMAIL PROTECTED]
|
| cc:
|
| Subject: [WhatsUp Forum] Using a GSM modem
|
>------------------------------------------------------------------------------------------------------------------------------|
Has anyone had any experience in setting up a GSM modem to send an SMS
notification directly. I have a Siemens TC3 GSM modem, I am able to produce
the AT command string to send an SMS using a console like Hyper terminal
but What's Up does not seem to have a notification option to just send AT
commands to a serial port.
I have also noticed that version 8 has SMS support that seems to work in a
similar fashion to a paging service.
Any response would be appreciated
Daniel
------------------------------------------------------------------------------
This message may contain confidential information, and is intended only for
the use of the individual(s) to whom it is addressed.
==============================================================================
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
