RE: [WhatsUp Forum] Reboot of WhatsUp Failed to save settings

[Bruce Shaw]

Title: Reboot of WhatsUp Failed to save settings

Are you using the same username as when you installed the software?  You may not have write permission to the appropriate directory.

-----Original Message-----
From: Roberts Phillip (IBM) [mailto:[EMAIL PROTECTED]
Sent: Monday, March 17, 2003 2:24 PM
To: '[EMAIL PROTECTED]'
Subject: RE: [WhatsUp Forum] Reboot of WhatsUp Failed to save settings

In an attempt to reset some of the easier to remember setting, I reset my setting in the program options, save all of my maps etc. Shut down the program and open it back up, and it defaults back to the default settings. What could be causing this???

 

Thanks,

 

Phillip B. Roberts
Network Administrator
Thomson
Circleville Glass Operations
 24200 U.S. Route 23, South / Circleville, OH 43113-9002
Ph: 740-477-6652 (x6652) / Fx: 740-420-6511 / Pg: 740-863-0080 (x5306)
Cell: 614-477-6741 / [EMAIL PROTECTED]

_____
Privileged/Confidential Information may be contained in this message.
If you are not the addressee indicated in this message (or responsible
for delivery of the message to such person), you may not copy or deliver
this message to anyone. In such case, you should destroy this message
and kindly notify the sender by reply email.
______

-------------------------------------------------------------------------------- As of February 12th, 2003 Thomson unified its email addresses on a worldwide basis. Please note my new email address: [EMAIL PROTECTED] http://www.thomson.net/

-----Original Message-----
From: Roberts Phillip (IBM)
Sent: Monday, March 17, 2003 3:57 PM
To: '[EMAIL PROTECTED]'
Subject: [WhatsUp Forum] Reboot of WhatsUp Failed to save settings

My WUG8.0 Server got rebooted, when it came back up, it had none of the settings saved, none of the auto load maps loaded, and they are not listed in the maps to load when the program loads, the WUG Web Server is back to all of its default settings. Any idea what happened? Is there a way I might be able to get all of these settings back?

Any help would be appreciated.

Thanks,

Phillip B. Roberts
Network Administrator
Thomson
Circleville Glass Operations
 24200 U.S. Route 23, South / Circleville, OH 43113-9002
Ph: 740-477-6652 (x6652) / Fx: 740-420-6511 / Pg: 740-863-0080 (x5306)
Cell: 614-477-6741 / [EMAIL PROTECTED]

_____
Privileged/Confidential Information may be contained in this message.
If you are not the addressee indicated in this message (or responsible
for delivery of the message to such person), you may not copy or deliver
this message to anyone. In such case, you should destroy this message
and kindly notify the sender by reply email.
______

--------------------------------------------------------------------------------
As of February 12th, 2003 Thomson unified its email addresses on a worldwide basis.
Please note my new email address: [EMAIL PROTECTED]

http://www.thomson.net/

This communication is intended for the use of the recipient to which it is addressed, and may contain confidential, personal and or privileged information. Please contact us immediately if you are not the intended recipient of this communication, and do not copy, distribute, or take action relying on it. Any communication received in error, or subsequent reply, should be deleted or destroyed.