Try this app called "Trap Generator" from ncomtech. The link is near the bottom of the page.
http://www.ncomtech.com/download.htm >>> [EMAIL PROTECTED] 03/25/03 02:02AM >>> I have done this in the way that I either change the value from 90% to 20% or I create a huges file on the drive. regards Jens Christensen Siemens A/S -----Original Message----- From: Cornish, Bryn [mailto:[EMAIL PROTECTED] Sent: 24. marts 2003 18:53 To: [EMAIL PROTECTED] Subject: [WhatsUp Forum] Creating Traps in Win2K? I have a small problem. I have to configure my WUG server to recieve SNMP traps from my TEST server. On the TEST server I have pointed the traps to go to the WUG server and I have enabled the WUG server to receive traps from any server. How do I actually create a Trap on the TEST server to have it send to WUG server? I have found lots of documentation on how to enable it but no information on how to specifically create the traps themselves.... I want to send a trap for DRIVE 0(c: drive) on a compaq server.... the MIB is 1.3.6.1.4.1.232.11.2.4.1.1.5.0 I want the trap to be sent if the % usage goes over 90% How can this be done? (i know this can be monitored as a service on a device but management is not interested in that) Thanks Bryn Cornish Junior Security & Infrastructure Analyst Technology Support & Infrastructure Division of the Chief Information Officer Alberta Department of Energy 780 427-7870 FAX 780 422-9522 Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
