I also have an installation of WUG that just stops doing anything. I'm running it on a Windows 2000 Server, SP4 machine. I also noticed that the snmpgraph.exe has a bad memory leak in it. I have two WUG machines actually, one polling, and one graphing. The graphing machine I had to downgrade to 6.01 (I never had 7), because the snmpgraph.exe handle leak would take the machine down within a couple hours.
The polling machine is running v8.01, and I haven't had major problems in a while, but I've gotten into the practice of rebooting them once a day. Kinda sad that you have to reboot once a day because of memory leaks. I haven't used the syslog or NT event log monitoring functionality, but I've seen many people post about memory leaks in those components as well. I really like WUG and IPSwitch products in general (we also use WS-FTP Server). I hope they fix these issues ASAP. That brings up another question...is anyone at IPSwitch reading this e-mail list? Erik Amundson Senior Network / Systems Administrator Open Access Technology Int'l, Inc. Phone (763) 201-2005 Fax (763) 553-2813 mailto:[EMAIL PROTECTED] CONFIDENTIAL INFORMATION: This email and any attachment(s) contain confidential and/or proprietary information of Open Access Technology International, Inc. Do not copy or distribute without the prior written consent of OATI. If you are not a named recipient to the message, please notify the sender immediately and do not retain the message in any form, printed or electronic. -----Original Message----- From: Day, Will [mailto:[EMAIL PROTECTED] Sent: Wednesday, July 30, 2003 9:50 PM To: '[EMAIL PROTECTED]' Subject: RE: [WhatsUp Forum] WUG 8.01 RAM Usage I can't add much that's useful here except to say that I have an installation of WUG that DOES just stop polling. I too was not sure it was monitoring and alerting. The issue was revealed by overlapping management software showing downs when WUG showed ups. I have WUG running as a service and after some time passes (how much time is under investigation) it just stops polling. Drilling down through the web pages to an individual device shows "last poll time" and reveals that it's no longer polling. Re-starting the service on the box re-starts the polling. The issue seems to have started after I patched from 8.0 to 8.01 If anyone knows of a way to run the debug log and pipe it to a file while WUG is running as a service I'd be interested in knowing about that. Will Day -----Original Message----- From: Jeff Cook [mailto:[EMAIL PROTECTED] Sent: Wednesday, July 30, 2003 5:55 PM To: '[EMAIL PROTECTED]' Subject: [WhatsUp Forum] WUG 8.01 RAM Usage I have been having a few issues with WUG 8.01 on a Win2K Pro SP 2. I notice most that the web interface is down. WUG is still open and as best as I can tell it is running. However I'm not sure the monitoring and alerting is still working. However I have noticed that when I go in to restart WUG to get the web interface working the memory usage is very high. I see that WUG is using 100+MB of memory, and the VMem is at around 260MB. When I start WUG it's usage is at about 10 MB. Does any one have any ideas? IPSwitch - Do you know about this issue? Thank You Jeff Cook Network Administrator Whatcom Educational Credit Union Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
