In order to reduce those types of messages, you need to change the facility level on the PIX so that your not getting connection state type traps. I had it enabled on an enterprise pix and was getting 1 GIG of data per day....NASTY!
Anyways, change the fac and logging levels on the PIX to show errors and above....i am not near my notes, but i believe fac level 3 is good enough, should cover errors and up. You currently probably have it at level 7 debugging.
| Jason Humes <[EMAIL PROTECTED]>
Sent by: [EMAIL PROTECTED] 11/10/03 08:28 AM
|
|
Hi
Is there any way to filter out unwanted SNMP traps from showing up on a devices log status? When I click on a my pix firewall, it shows all sorts of SNMP traps saying UDP connection torn down...etc. and I don't what these displayed in whatsup. Thanks
Jason D. Humes
Applied Computer Solutions Inc.
3020 St. Etienne Blvd.
Windsor, Ontario
Phone: (519) 944-4300 x211
Fax : (519) 944-4247
Email : [EMAIL PROTECTED]
**********************************************************************
Confidentiality Notice:
The information contained in this e-mail and any attachments may be legally privileged and confidential. If you are not an intended recipient, you are hereby notified that any dissemination, distribution or copying of this e-mail and any attachments is strictly prohibited. If you received this e-mail in error, please notify the sender and permanently delete the e-mail and any attachments immediately. You should not retain, copy or use this e-mail or any attachment for any purpose, nor disclose all or any part of the contents to any other person.
Thank you.
