thanks for the reply I have tried
changing the instance but no luck. Also tried using the oids you supplied but I
seem to be getting a null value for those as well
Any other suggestions. I reckon I may have missed a step
somewhere.
Luke.
-----Original Message----- From: Goran Jovanovic
[mailto:[EMAIL PROTECTED] Sent: Tuesday, 13 January 2004 11:49
AM To: [EMAIL PROTECTED] Subject: RE:
[WhatsUp Forum] Monitoring diskspace on RAID Systems.
Sorry Drive D:
1.3.6.1.4.1.9600.1.1.1.1.5.2.68.58 is for percent free.
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Goran Jovanovic Sent: Monday, January 12, 2004 7:44
PM To:
[EMAIL PROTECTED] Subject: RE: [WhatsUp Forum] Monitoring
diskspace on RAID Systems.
Hi I have this type
of monitoring working.
To monitor how much
disk space is available on drives (from SNMP2CA)
Drive C:
1.3.6.1.4.1.9600.1.1.1.1.20.2.67.58
Drive D:
1.3.6.1.4.1.9600.1.1.1.1.5.2.68.58
To monitor if the Cpq
Array has degraded I use 1.3.6.1.4.1.232.3.2.2.1.1.6.0 for instance 0 and
1.3.6.1.4.1.232.3.2.2.1.1.6.1 for instance 1 etc all the way up to instance 8.
Different servers seem to have different instances for the logical array. I
run getif against the server to find out which instance it is then assign the
appropriate service. Note this does not give you disk space usage only if the
array is degraded or not.
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Chris Ohm Sent: Monday, January 12, 2004 7:26
PM To:
[EMAIL PROTECTED] Subject: RE: [WhatsUp Forum] Monitoring
diskspace on RAID Systems.
Try changing the
instance number.
For
example:
idiskfreemegabytes.1
Each disk should
have its own instance ID.
Chris
Ohm Systems Administrator American Specialty Health
Inc. [EMAIL PROTECTED]
-----Original
Message----- From: Luke
Zanin [mailto:[EMAIL PROTECTED] Sent: Monday, January 12, 2004 2:58
PM To:
'[EMAIL PROTECTED]' Subject: [WhatsUp Forum] Monitoring
diskspace on RAID Systems.
Hi there,
I am trying to
monitor disk space on a Compaq proliant ML 370 Server with
C: -> RAID1
config and D:-> RAID 5 config.
I ran perfm.bat on
the server I want to monitor. I copied the perfmib.mib
to a directory I
created on the Whats up Gold Server along with the Compaq
MIBS I downloaded
from the somix website.
I ran the mib
mibextractor it ran successfully.
I checked the
mib.tx and traps.txt and they have updated correctly.
Whent I went to
Tools-> Net Tools-> SNMP and went to the
"ldisklogicaldiskentry"
and chose "ldiskfreemegabytes" it keeps returning
CAUTION: This
email and any attachments may contain information that is confidential and
subject to copyright. If you are not the intended recipient, you must not
read, use, disseminate, distribute or copy this email or any attachments. If
you have received this email in error, please notify the sender immediately
by reply email and erase this email and any attachments. Thank
you.
DISCLAIMER: To the
maximum extent permitted by law, Pracom Limited is not liable (including in
respect of negligence) for viruses or other defects or for changes made to
this email or to any attachments. Before opening or using attachments,
please check them for viruses and other effects. If this email is a private
communication it may not represent the views of Pracom
Limited.
CONFIDENTIALITY NOTICE: This e-mail, and any attachments, are
intended solely for the use of the intended recipient and may contain
information that is confidential, proprietary, copyrighted and/or legally
privileged. Any unauthorized disclosure, distribution, or use of this
information is prohibited. If you are not the intended recipient, and have
received this message in error, please notify the sender immediately by reply
e-mail and destroy all copies of the original message and any attachments.
Your compliance is appreciated.
CAUTION: This email and any attachments may contain information that is confidential and subject to copyright. If you are not the intended recipient, you must not read, use, disseminate, distribute or copy this email or any attachments. If you have received this email in error, please notify the sender immediately by reply email and erase this email and any attachments. Thank you.
DISCLAIMER: To the maximum extent permitted by law, Pracom Limited is not liable (including in respect of negligence) for viruses or other defects or for changes made to this email or to any attachments. Before opening or using attachments, please check them for viruses and other effects. If this email is a private communication it may not represent the views of Pracom Limited.
