I've got an APC UPS with a network mgmt card installed. It's repeatedly sending SNMP traps that indicate a power module failure. THey are reporting in the activity log every 10 minutes, even though the polling on this map is every five minutes. Anyway, I was instructed to disable this notification in WUG for now until the team could address the UPS issue. So, on the device in WUG, I disabled SNMP, disabled any services being monitored, there are no events to solicit, I am still monitoring the device for up/down time, alerting is still enabled, and on alert properties ON EVENT is unchecked. So the should be no SNMP traps coming from the APC UPS to WUG; correct? So why are they still making their way to WUG?
Well, I think I've just found a cure, anyway. Connected to the network card and disabled the WUG server as a trap receiver. So I've effectively blocked the trap on both ends. Still can't figure out why they were still showing up in WUG, though, in the first place.......... Chris Powers Systems Engineer MCSE, CNA, Network+, A+ Keane IT Technical Services Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
