When sending syslog messages, the router probably uses source IP address different than the address monitored by WU. If it is a cisco router, use this command and put interface that is being monitored by WU.
logging source-interface <interface name>
I recommend using Loopback interface for this kind of stuff.
sb
| Andy Fry <[EMAIL PROTECTED]>
Sent by: [EMAIL PROTECTED] 22.06.2005 07:45
|
|
Hi,
I'm currently evaluating What's Up Gold, and I'm trying to get syslog
messages to be associated with the appropriate device.
I have two routers which are both logging to my WhatsUp syslog server, but
one gets associated with the correct device quite nicely, and the other
doesn't. The one that does not appears in the log as Unsolicited...
Anybody have any ideas on how I configure this correctly ?
Thanks
Andy Fry
Technical Consultant
Essential Computer Systems
Ph: +61 8 8223 1144
Fax: +61 8 8223 1401
This email is from Essential Computer Systems Pty Ltd (ACN 008 126 707)
The information contained in this email (including any attached files) may
be privileged and confidential intended for the use of the person/persons
named above. If you are not the intended recipient, you are advised that
any use, distribution or copying of the information is strictly prohibited.
If you have received this transmission in error, please notify Essential
Computer Systems immediately on +61 8 8223 1144 or reply by email to the
sender.
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
